-
Installing underfloor heating in the home in winter and the relatively high temperature may cause the air to dry out. Dry air can cause respiratory tracts.
disease, easy cell dehydration. It is easy to aggravate respiratory diseases or induce the occurrence of respiratory diseases. After the indoor temperature rises, it will also cause some poor-quality furniture and building materials to release benzene, formaldehyde and other toxic and harmful substances, accelerating the growth of indoor mold.
The volatilization of these substances into the air can affect the respiratory system.
health. <>
Place some humidifiers in the house.
Or sprinkle water indoors appropriately so that you can take some measures to maintain humidity indoors. This is good for our respiratory tract, and one of them is ventilation. This is very important to me. Now it's the coronavirus.
In the later stages of the disease, always in prevention and control, ventilation is used for indoor air flow and humidity. Including some bacteria, it will flow and do not accumulate in a certain space. In winter, indoor temperatures are high, and mold growth in an environment with high temperatures and poor air circulation is also one of the causes of asthma attacks.
To reduce the growth of mold, it is important not only to keep the room clean, but also to ventilate it frequently. We must take care to stay away from allergens.
Underfloor heating heat pipes are underground. Since the low-temperature water is transported to the ground through the pipe, its temperature rise time is generally 3-6 hours, and the temperature rise equilibrium time of the whole house is about 12 hours; It is not recommended to turn on and off the underfloor heating after operation. The heat of floor heating needs to be dissipated through the floor material, so the choice of floor material is very important, which has a great impact on its heat dissipation effect.
If the underfloor heating pipe is damaged, it is difficult to repair. Underfloor heating pipes are buried under the backfill layer. If the underfloor heating pipe is damaged, it is more troublesome to repair; Therefore, the construction of underfloor heating is particularly important. It is recommended that the site be cleaned during underfloor heating construction and that no one else should enter or pass through the construction site.
After the construction is completed, it must be retained**. Brutal construction is strictly prohibited before the later stage of surface drilling operations.
-
I don't think so, because the floor heating makes the air warmer, then the weight of the dust will become very heavy, so it will not rise in the air, so it will not be dusty.
-
Yes, because during this floor heating, the floor heating pipes need to be laid in the ground, so the changes will be made, which will make the home dusty.
-
I don't think it will make the house dusty, because the underfloor heating does not affect the air, and the underfloor heating is installed underground.
-
Yes, it will definitely be dusty when installing the cables, because this is a construction situation and needs to be moved.
-
Will installing underfloor heating cause dust? Winter heating facilities are a problem that many people are concerned about, and now most of the buildings in the community have been changed to floor heating, and they will be collectively heated on time every winter. But more importantly, the thermal effect utilization of floor heating is relatively high.
Therefore, many self-built houses have also begun to install underfloor heating, and no longer use traditional heating.
But there are many people who have complained on the Internet: when installing underfloor heating, the home will be dusty. This makes many people with cleanliness habits unacceptable, so they give up the idea of installing floor heating.
Weighing the pros and cons, installing underfloor heating is really profitable.
But I think that if you weigh the future benefits, installing underfloor heating is more cost-effective than traditional heating. It will definitely be dusty when installing underfloor heating, because it is during the construction phase. Workers need to lay pipes underground, and there will definitely be relocation.
But you don't need to worry too much after installation, and the thermal efficiency is much higher than that of air conditioning and traditional heating. And its heating method is from the floor tiles upwards, and the indoor temperature will also rise quickly.
What's more, using a conventional heater may not cause too much dust during the installation process, but it will be very dirty during the subsequent use process. Because the traditional radiator is connected with steel pipes, and two different steel pipes are wound together by a kind of grass, so after a long time of corrosion, there is a high probability of water leakage at the interface of the two pipes. At the same time, after a long period of use, the wall where the heating is attached will turn black.
Therefore, it is more than worth the loss.
If you insist on using air conditioning and other electric heating equipment, although it will improve a lot in terms of hygiene, the power loss caused by it is also unaffordable for ordinary people.
And there is also a saying on the Internet that the use of floor heating will cause indoor floating and sinking, but I think this phenomenon of floating and sinking is not actually caused by the use of floor heating, and the dust in the air is doing disorderly thermal movement, so even if you do not use floor heating, there will still be a lot of floating dust in the house.
-
This is indeed true, if the air in your home moves too fast, there will be dust.
-
Yes, because the soil was still very large when this thing was installed, and it still needed to be filled.
-
It's true, because installing underfloor heating is a big project, and you need to break the earth, and if you do, it will definitely be dusty, and there will be a shadow of soil all over the house.
-
In winter, the air is dry, the temperature rises, and the procedures installed in it are complicated, and if it is not handled properly, it will accelerate the growth of toxic and harmful substances and germs, so it will be dusty.
-
This is because for the installation of underfloor heating, its procedure is more complicated, or it may be relatively dry, so it will make the home dusty.
-
The main reason is that the floor needs to be sanded flat before it can be installed, which will make it dusty.
-
Generally speaking, in winter, the temperature at home is relatively low, and it will get colder and colder as the days go by. Therefore, in the face of cold weather, many people will choose one or more heating devices to make their homes warm. Such as air conditioners, radiators, underfloor heating, and so on.
With the increasing number of people installing floor heating, many problems have also been highlighted in the process of use, such as a lot of floating dust on floor heating?
Floor heating is warm enough to cool the roof, and low-temperature radiant heating is the most comfortable heating method, which is recognized worldwide. Including Europe, which has spread all over the world as the birthplace of underfloor heating standards, how can this be explained? I have seen a lot of people in Europe using underfloor heating, this is a fact, how to give it?
In winter, the surface temperature of the floor heating is about 25. If there is dust in the room temperature of about 20 degrees, the air conditioner will be turned on to force convection, and the room temperature will be 25 degrees in summer. Ground temperature 30 Is there also a huge dust floating place?
It is a fact that the air convection of radiator heating will blacken the wall for a long time, according to this statement, the floor heating, air conditioning and radiators cannot be used, this is the result of rumors! It is unacceptable to anyone, otherwise the summer heat will kill people. Freeze into a dog in winter!
In addition, Europeans pay attention to air hygiene and safety, because of dust and lack of underheating, but this topic is less underheating, which is obviously contradictory. It's hard to justify, so it's an out-and-out rumor! It's a prank.
In the end, I said: turning on the floor heating and raising dust is actually smearing the black radiator, and everyone who understands knows it!
Although we can know from the above explanation, the normal operation of the floor heating itself is not the main cause of excessive dust. But what if we do encounter such a situation? Here are a few ways to deal with it if it happens: <>
1. Check the doors and windows to see if the wind brings in too much dust from the outside;
2. Mop the floor often to clean, keep the humidity and cleanliness of the ground, and do not give the opportunity for floating dust;
3. Use a humidifier to maintain the humidity of the air in the room, so that even if there is floating dust on the ground, it will not float up, which can not only prevent floating dust but also maintain indoor moisture, this method kills two birds with one stone;
-
Yes, it is because it is particularly troublesome to install floor heating, you need to pick up all the floor tiles on the ground, you need to re-lay the pipes, and the floating dust on the ground will flow upwards after receiving hot air, and the dust will float all over the house, so you need to open the windows for ventilation.
-
When installing floor heating, the home will indeed be dusty, because the master has to move during the construction.
-
It will make the home dusty, because it is in the construction stage, but the installation of underfloor heating works well in the later stage.
-
Floor heating cleaning is very simple, mop the floor, don't dry. Absorbs dust from the ground and is simple to clean. Floor heating is the heat rises, if you don't use a wet mop, fine dust will rise along the heat and will also drift to any corner of the house, so it is better to use a wet mop.
When installing electric floor heating, it should be designed according to the actual situation, such as the insulation and heat dissipation of the room, or the function of the room, or the function of the room, of course, the placement of furniture should also be considered in the design of electric floor heating. After designing the installation plan of electric floor heating, it is necessary to lay the pipes of electric floor heating, when laying pipelines, we should pay attention to the quality of the pipes, and also pay attention to the quality of laying, because this will affect the effect of using electric floor heating. It should be noted that there should be a gap between the electric floor heating and the wall, so that the electric floor heating will not crack when heating. >>>More
There are several steps to learn how to install underfloor heating: >>>More
My home is equipped with a Luyangchun brand of far-infrared electric heating equipment, very comfortable, but also more economical, you can look for it on the Internet If you can't find me, I'll help you take a look I hope it can help you.
<>1. Paste the corner insulation strips.
2. Lay green feather extruded plastic board. >>>More
Houses with relatively high floor heights are more suitable for installing floor heating, and old houses are more suitable for radiators. For northerners, the most important thing when decorating should be heating. Because the north is very cold in winter, if the heating is not in place, there is no way to survive the winter. >>>More