Do you need to ventilate and turn on the floor heating before laying laminate flooring?

1. The screed must be dry before installing the wooden floor. Otherwise the floor will bulge, which is very important. Generally, the screed should be dry for at least 20 days (avoid nest work, other construction can be done during this period), and it should be longer in winter, not that the surface is really dry when the eye sees it.

Self-leveling is not faster than the leveling layer, the solidification speed is faster, and it is thinner, so the drying period is shorter, about 3 days.

Test method: Slow evaporation of water in winter Here is a simple test method: find a piece of plastic wrap (not too big), put it on the plane, seal the surroundings with tape, and the friends who are heating at home should test whether the heating system is operating normally in advance, and if the conditions permit, you can make the geothermal heat run at low temperature, and wait for more than a day to see if there are water traces on the ground, if not, it means that it has been dry.

2. The floor should be entered 1-3 days in advance to adapt to the pavement environment. In winter, the temperature difference between various places is large, so it is necessary to adapt the floor to the environment to be paved in advance, otherwise it is easy to have unnecessary deformation. This is very easy to understand, and generally manufacturers will load the material one to two days in advance to adapt to room temperature.

3. After the floor is installed, the floor heating should not be turned on very much at once, and it must be run at a low temperature for a period of time. This protects the underfloor heating, the screed underneath the floor and the wooden floor.

Fourth, after the formal heating, it is best to put a humidifier at home, or put a basin of water. After heating, the indoor air will be drier, and the floor is not only afraid of moisture, but also afraid of dryness. In short, the right humidity is the best.

Before the ground is not constructed, it is best to vent the floor heating first and wait for a while to see if it is hot.

Laminate flooring can be used for underfloor heating, but parquet is recommended. Because the formaldehyde content in laminate flooring volatilizes at high temperatures, it has an impact on the body.

1. The choice of geothermal floor should be decided according to the particularity of the geothermal heating method; It is suitable for repeated changes of cold and heat and is conducive to heat conduction. First, the geothermal floor should first have a small amount of deformation; Second, it should be conducive to heat conduction; 3. Moisture-resistant and waterproof.

2. Under the same environmental conditions, the deformation of solid wood flooring is larger than that of laminate flooring. Laminate flooring has a large amount of deformation for multi-layer parquet. The reason for the small deformation of multi-layer parquet used for geothermal heating is that its substrate is staggered horizontally and vertically between each layer, and each other is contained; There are also dense anti-deformation grooves on the back.

The stress generated by the heating surface is decomposed, so it has a small amount of deformation. The deformation of wood flooring from large to small is: solid wood flooring, laminate flooring, and solid wood parquet.

3. The thermal conductivity of the floor is related to the thickness of the floor, and the thickness of multi-layer parquet is about the same as that of laminate flooring, but the anti-deformation groove on its back is conducive to air circulation and noise reduction. Thermal conductivity is superior to laminate flooring. The thermal conductivity of wood flooring materials is arranged in order from large to small:

Parquet >> Laminate Flooring >> Solid Wood Flooring.

4. In winter, the indoor is dry, and the general situation will be humidified, and the moisture resistance and waterproof performance of the floor is also important. The parquet is specially treated, and the sample is soaked in water for 3-5 days without obvious deformation; Even if a large amount of water runs on the ground after installation, and the arch is soaked, as long as the doors and windows are opened and the air circulation is maintained, it will soon be restored to its original state, which solves the customer's worries that the customer cannot recover after laying other floors when encountering water. In terms of moisture resistance and water resistance, multi-layer parquet is significantly superior to other categories of flooring.

Answer: Laminate flooring is used for flooring mainly concerned about two aspects, 1. Formaldehyde emissions, after the national standard is improved, the general workers can meet the standard, and a good floor is more than the national standard, which can be fully applied to the requirements of floor heating. 2. Anti-deformation, laminate flooring is no problem, and heat conduction is faster. It is recommended that consumers choose better or regular manufacturers' products.

Laminate flooring for floor heating is definitely not good, laminate flooring is easy to deform, and it is easier to deform when the floor heating is baked. Second, when installing the floor, the bottom layer must be used with their manufacturer's special moisture-proof film, the film of the floor packaging must be cleaned up, and the baseboard sealant must be selected as a good brand. We often focus on the environmental protection of the floor, in fact, these auxiliary materials will volatilize the components that are not conducive to environmental protection after being heated underneath.

It is not recommended to use laminate flooring for floor heating, because although laminate flooring belongs to wood flooring, it is definitely not comparable to solid wood and multi-layer solid wood flooring. The lowest level is synthetic wood flooring. Solid wood is a pure natural wood floor, home first, solid wood multi-layer can also be used for floor heating, but the laminate board may be prone to dry cracking, deformation, groove and other phenomena after surface floor heating conduction!

Formaldehyde will not be ideal either! In this way, they can turn on their own boiler for heating during the overall winter, so that they can live a comfortable winter life and say goodbye to the long and wet winter in the south.

It is not recommended to use, and if you do, choose an eco-friendly one.

Question: Home floor heating, even with April to keep the temperature 18-25, tangled with floor or floor tiles? Fear of floor deformation and formaldehyde.

Question: Household floor heating, can not be supplemented by floor heating pipes under the cabinet, and whether the bed and floor heating surface need to be kept at a distance?

Answering the best wood floor material in the underfloor heating environment, I think it is solid wood multi-layer flooring, its appearance is basically the same as solid wood flooring, the wood texture is very beautiful, cheaper and more economical than solid wood flooring, easy to lay and maintain; It can be used in the environment of floor heating, and the stability is better in the later stage.

Okay, wait a minute. If the floor is paved with underfloor heating, do not use fixed trim or legless furniture on the floor as much as possible. Because the floor heating floor surface is a heat dissipation surface, hot air circulates from the bottom up, creating a greenhouse effect. If legless furniture is placed on the floor, the heat dissipation surface will be reduced, which will not only weaken the thermal effect, but also prevent the heat from being fully dissipated.

But since it has been laid, if you haven't bought the cabinet yet, it's better to buy one with legs.

Question: Is it better to install a solid wood multi-layer floor? Is it the same as solid wood multi-layer laminate flooring, it is said that the latex in the heat will release a large amount of formaldehyde, really?

Question: Will the use of latex in solid wood composite release a large amount of formaldehyde when heated by floor heating?

Ask what you think you should do and listen to your suggestions.

It is not recommended, wooden floors and tiles are fine.

It is best not to choose pure solid wood flooring for floor heating, you can consider solid wood flooring. Among them, the parquet floor should be as few layers as possible, and the three-layer solid wood composite is the best.

If you live above the second floor, it is recommended to have a wooden floor, and the suspended pavement will lay a layer of moisture-proof floor mat under the floor, which is not only moisture-proof, but also has a certain sound reduction effect, and will avoid a lot of small troubles that disturb the people in life. Rising Sun Economic and Trade will answer for you.

Summary. Hello! We're glad to answer your questions! Dry floor heating directly paved floor can not be done oh, generally can not be operated in this way, must be found back to fill and then paved, this is also a responsible approach to themselves, according to the construction standards must return to the day ceramsite concrete.

Hello! We're glad to answer your questions! Dry floor heating directly paved floor can not be oh bridge leakage, generally can not be operated in this way, must be found back after filling and then paving, this is also a responsible approach to their own sales, according to the construction standards must return to the sky ceramsite concrete in the soil.

Hello! We're glad to answer your questions! In this way, the heat of the ground can be dissipated to the greatest extent, but now in order to reduce the cost and construction, people don't care, and the grinding is directly backfilled with cement mortar.

The standard practice for dry-laid underfloor heating is to lay the floor directly on top of the underfloor heating. Never put a moisture barrier underneath the floor. Because the vapor barrier is heat-resistant, it is not conducive to heat conduction.

Maybe the flooring merchant will say: "My moisture barrier is for underfloor heating, and there are heat dissipation holes on it". In fact, the moisture-proof layer of the Kaisheng bucket with holes is more powerful.

Because after the floor is laid, there is air between the floor heating and the floor, and the air that does not flow is heat resistant.

It is completely unnecessary, because underfloor heating does not affect the strength of the floor, and the most ordinary flooring will do.

It is not necessary to use laminate flooring, if laminate flooring is used, it will lead to uneven heat transmission of floor heating, resulting in the overall temperature in the room cannot go up, from this point of view, there is no need to use laminate flooring.

No, you don't. If you install floor heating, you can smooth it with cement floor, so that you can also achieve the corresponding effect and heat evenly.

No, because the underfloor heating is installed under the floor, and there will be sand between the underfloor heating and the floor, so it will not harm the floor.

Yes, in the process of long-term heat release, the floor will be seriously damaged, and the ordinary wooden floor will gradually dry out and crack, and curl up and fall off.