Do you use begonia horn when decorating your home? What are its advantages?

Decoration of begonia corner refers to a kind of edge construction practice on the sunny corner of the wall, in order to beautify and reduce the sharpness of the corner, the use of passivation treatment to make the surface beautiful.

After the passivation treatment is taken for the corners of the furniture, the existence of its potential safety hazards can be reduced; While taking passivation treatment, different techniques can be used to decorate the sunny corner, which increases the aesthetics.

Those places could be renovated with Begonia Point:

1. Decoration practices of ceramic tiles.

If you paste tiles in the corners of the wall, you can leave the gap between the tiles and the tiles, and then take the construction method of Begonia Corner. Generally, when two tiles are docked, the gap in the middle can be polished to make the two tiles more closely connected in the middle, and then the sharp points on the corners can be passivated.

2. Decoration practices for wall corners.

If the construction practice of Begonia Corner is taken at the corner of the wall where people come and go, the form of corner protection should be directly adopted. For example, there is an obvious sunny corner wall between the living room and the corridor, due to the factors of people coming and going, the corner of the wall may be damaged, in order to avoid these factors, the edge protection strip can be installed at the corner of the wall, and the edge protection strip of the obtuse angle is the main.

3. Decoration practices of furniture.

Almost every family has to install a set of wardrobes in the corner of the wall when decorating the bedroom, and when the interior door is opened, if you see the corner of the wardrobe, it will not only affect the appearance, but also affect the safety. To solve these problems, the practice of rounding curves can be used to create the effect of begonia horns.

It can be used, begonia corner is the simplest way to "close the mouth of the yang angle", that is, the tile and the corner of the tile are directly docked, the biggest advantage of this direct way is that it is convenient and fast, and it can reduce the situation that the corners are easy to collapse, and can also save time and reduce workload.

It can be used, the overall sense is better, and there will be no missing phenomenon, no problems in the details will be exposed, and the visual sense is very perfect, after use, you can increase the life of some materials, and so on.

Required. In this way, the style of decoration can be more upscale, and it is also particularly beautiful, and the sense of line is very good.

It depends on personal preferences. Begonia Corner also has many advantages, which can enhance the sense of range in the room, and at the same time, it will also make the decoration look more high-grade and add a lot of fashion elements.

Yes, after using such a device, it is more affordable, and it can also make the design style of the house more fashionable.

What is called Begonia Corner in decoration: In real estate, Begonia Corner refers to a treatment method that passivates the yang angle in the process of building decoration or furniture making. The general practice of the mountain chain is:

When sticking bricks or hanging stones, at the position of the sunny corner, the brick that touches the corner is cut 45 degrees. The chamfer is small, which is easy to cause damage to the edge of the board and depends on the thickness of the stone. The closure of the begonia corner, the stone can not be directly in contact with the glass, the stone and the glass curtain wall profile closure can be made of glass glue, and the larger gap should be filled with Zhaoming foam rod and then glued.

The reason why it is not recommended to do begonia horn is that it is not easy to process, the construction difficulty is high, the processing cost is also high, and it is easy to scratch.

Normal tile chamfering will cut the entire thickness of the tile at a 45-degree angle, and the effect of paving is porcelain touching porcelain. Begonia corner is to leave the thickness of the tile two millimeters, and cut the remaining thickness into a 45-degree angle. Generally, a 5 x 5mm process groove is formed, which has certain requirements for construction technology, and there is also a certain loss of stone integrity, and the labor cost is high.

Begonia corner is the chamfering method of closing the stone and wall tiles for engineering decoration. The main method is to dry hang the stone wall in the sunny corner, the stone scrap base layer is pasted inside, and the L is pasted outside.

Advantages of Begonia Point.

1. Exquisite appearance

Compared with the traditional traditional corner, the begonia corner is more delicate and beautiful, and this process is cut 2 to 3 mm from the glazed surface of the porcelain bucket sensitive brick, so that the yang corner will appear to be more beautiful and smooth after paving the tiles.

2. It is not easy to break porcelain

If the tile is not treated at the sunny corner and is directly paved, the place where the two tiles are connected is very, very fragile, and it is easy to crack after a long time. The tile is paved with begonia corner technology, and the tile connection will be more stable, strong and stable, and has a long life span.

3. It is convenient for beautiful sewing

Tile begonia corner process, you need to cut the tile at a 45° angle, so a groove will be formed in the middle after splicing, which is not only beautiful, but also relatively simple in the later stage, and it is not easy to hide dirt and dirt, which can make us cleaner and simpler.

Begonia Corner is a kind of home decoration and fiber amusement.

Begonia angle is to grind the tile edge into a 45° angle, but if it is not ground to the end, a certain side edge will be reserved, increasing the area of the side edge, which can alleviate the phenomenon of side edge collapse. In the process of building decoration or furniture making, a treatment method that passivates the yang angle is a kind of beat, or refers to a treatment method that passivates the yang angle in the process of building decoration or furniture making.

Because it resembles begonia petals, it is called Begonia Corner. The craft originates from the flower decoration of ancient Chinese architecture, which refers to the process of building decoration or furniture production, a treatment method that passivates the yang angle, when the brick is pasted or hung with stone, the brick at the angle of the sun is cut 45 degrees. The advantage is that it can maintain the integrity and look more beautiful.

Begonia Horn is not a yin and yang angle

The yin and yang angle is one of the building structures, and the yin angle refers to the recessed corner of the wall, such as the angle between the top surface and the surrounding wall; The yang angle refers to the corner of the wall that protrudes from the congratulatory pin, such as the angle formed by two walls at the turn of the walkway. If the error of the yin and yang corners of the wall is large, it can be seen at a glance, which will affect the aesthetics of home decoration, and will also lead to the unsmooth installation and placement of cabinets and furniture, resulting in a waste of space.

The yin and yang angles are mostly 90 degrees, and when the yin and yang angles of the wall are accepted, the yin and yang angles are required to achieve the effects of perpendicular and parallel to the side line and the main body of the house, and the wall corners to ensure that they are straight and square.

Begonia corner closure has many advantages, and Begonia corner is the simplest method of "yang angle closing", that is, the tile is directly connected to the corner of the tile. The biggest advantage of this direct way of not dealing with it is that it is convenient and fast, and it can reduce the situation that the corners are easy to crumble, and it can also save time and reduce workload.

Summary. Hello, the begonia corner in the renovation is;

Begonia corner is the chamfering method of closing the stone and wall tiles for engineering decoration.

The main practice is to dry hang the stone wall in the sunny corner, the use of stone scraps base layer inside, L-shaped tiles outside.

It is the lap angle of plate and stone in decoration. The chamfering manufacturing method of the closing of stone, the wall tile which did the engineering decoration.

I hope it can help you, if you are satisfied, please give a 5-star like, I wish you a happy life<> who knows what the begonia corner is in the decoration?

Hello, I am helping you to inquire about the relevant information and will reply to you immediately.

Hello, the begonia corner in the renovation is; Begonia corner is the chamfering method of closing the stone and wall tiles for the decoration of the project rental section. The main practice is to dry hang the stone wall in the sunny corner, the use of the inner stone is the root layer of the eggplant material, and the outside is the practice of sticking L-shaped tiles. It is the lap angle of plate and stone in decoration.

The chamfering manufacturing method of the closing of stone, the wall tile which did the engineering decoration. I hope it can help you, if you are satisfied, please give a 5-star like, I wish you a happy life<>

All the places of the sunny corners need to be made begonia corners. Begonia angle refers to a treatment method that passivates the yang angle in the process of building decoration or furniture making. The corner of the hall refers to the protruding corner of the wall, such as the four corners of the protruding exterior of the building and the angle between the door and window openings and the wall.

The corresponding is the yin corner, which refers to the recessed corner of the wall. Decoration closing is through the decorative surface of the edges, corners and articulation of the part of the process, in order to make up for the shortcomings of the decoration of the finish, increase the purpose of the decorative effect, the practice of Begonia corner is one of the ways to collect the ruler of the line.

Begonia corner is the chamfering method of closing the stone and wall tiles for engineering decoration.

Dear, hello is happy to answer for you: who knows what the begonia corner is in the renovation? A:

It refers to a treatment method that passivates the yang angle in the process of building decoration or furniture making. Many people think that the way of right-angle splicing is a begonia corner, which is wrong. For specific academic articles, please refer to the Flower Decoration of Ancient Chinese Architecture.

Decoration should pay attention to many details, in the position of the corners, the treatment should be more careful, Begonia corner is often heard in the decoration industry. What is the formal practice of begonia horned ants? Today, PCHOUSE is here to explain it to you.

In real estate, begonia angle refers to a treatment method that passivates the yang angle in the process of building decoration or furniture making. The general practice is: when pasting bricks or hanging stones, at the position of the sunny corner, the bricks that touch the corners are cut 45 degrees.

If the chamfer is small, it is easy to cause damage to the edge of the plate, depending on the thickness of the stone. The closure of the begonia corner, the stone is not in direct contact with the glass, the stone and the glass curtain wall profile can be used to collect the sail mouth with glass glue, and the gap is larger to fill the foam rod and then glue.