Kitchen and bathroom ceiling installation, what are the things that must be paid attention to?

The kitchen and bathroom are the areas where we have heavy moisture, so many people will install suspended ceilings in the process of interior decoration of the kitchen and bathroom, so that they can have a delicate and comfortable indoor space for the bathroom. What must be paid attention to in the installation of kitchen and bathroom ceilings, let's give you a detailed introduction.

At this stage, the main raw materials for kitchen and bathroom ceilings on the market are PVC, gypsum board, plastic steel gusset board, aluminum gusset ceiling, etc. Due to the relatively large exhaust smoke and water vapor in the kitchen, we pay special attention to its waterproof, waterproof and fire safety performance when selecting the raw materials for the ceiling. Among them, the aluminum gusset ceiling has excellent performance and is the best choice for these kinds of kitchen and bathroom ceiling raw materials.

Therefore, we pay special attention to its waterproof, waterproof and fireproof safety performance when selecting the raw materials for the ceiling. Among them, the aluminum gusset ceiling has excellent performance and is the best choice for these kinds of kitchen and bathroom ceiling raw materials.

In the case of installing kitchen and bathroom ceilings, in order to facilitate the maintenance of the ceiling and the inspection of hydropower engineering lines, we should effectively reserve the maintenance port during installation and facilitate disassembly and assembly.

In the case of installing kitchen and bathroom ceilings, it is best to use light steel keels as frames. Light steel keel is a new type of building decoration material, it is light in quality, but the actual effect of load is very good. It also has practical effects such as waterproof, anti-shock, anti-fouling, etc., and is especially suitable for application in areas such as kitchens and bathrooms with continuous high temperature and heavy water vapor, and is not easy to deform.

It also has waterproof, anti-shock, anti-fouling and other effects, especially suitable for applications in areas such as kitchens and bathrooms with continuous high temperature and heavy water vapor, and is not easy to deform.

Generally, toilets and restaurant kitchens should be installed with various pipes before installing suspended ceilings. The range hood pipe in the kitchen of the restaurant needs to be installed in advance, and the plastic hose and exhaust flue of the range hood should be fixed and the actual hole diameter and location should be confirmed. You can also put the exhaust flue of the range hood into the ceiling, which will be more beautiful and generous.

Try not to use gypsum board ceiling, kitchen and bathroom can choose to use aluminum gusset ceiling, wall tiles can be installed only after the aluminum gusset is completed, and the suspension bar and keel layout should be horizontal and vertical.

First of all, the material of the ceiling should be very careful, to choose some waterproof, moisture-proof, and to reserve the maintenance port, to pre-bury the pipeline in advance, choose a light steel keel as the frame.

We must pay attention to cleanliness and hygiene, and we need to choose the right skeleton and pay attention to sturdy, so that we can better decorate.

Moisture-proof problem, water vapor when cooking in the kitchen, water vapor when bathing in the bathroom, these water vapor are evaporated, so the ceiling selection of the kitchen and bathroom, moisture-proof is the first consideration.

When installing and wiring for water and electricity, leave an extra set of switch wires, so that you can control the cooler separately, otherwise if the cooler is controlled synchronously with the lamp, the wind will blow when cooking in winter, and the back will be cold. Of course, if there is no line left in the early stage, you can also choose a cooler with a remote control, which can also be controlled separately.

Kitchen and bathroom as a housework space, moisture, easy to dirty, and the ceiling is installed in the ceiling, the position is high and difficult to clean, so when choosing kitchen and bathroom ceiling materials, the most important problem to consider is moisture-proof.

When installing this ceiling, it must be flush with our upper cabinets, otherwise there will be some dust inside. It is very inconvenient to clean.

For people who have bought a house and need to renovate, there are a lot of preparations that need to be done in advance. For example, you need to understand**Buy a kitchen and bathroom ceiling？What are the precautions when installing kitchen and bathroom ceiling lights?

So so-so**Buy a kitchen and bathroom ceilingThis? For building materials, it is generally recommended to see physical products in the market, compare the quality and then buy, of course, now that the network is developed, you can also inquire as needed. The following describes the precautions for the installation of suspended ceilings.

**Buy a kitchen and bathroom ceiling？Installation precautions 1: look at the thickness and keel of the plate.

The keel is an indispensable part of the decorative suspended ceiling, and the main choice for kitchen and bathroom ceilings is the alloy keel. The alloy keel is mainly an alloy of steel and aluminum. Not only does it have the hardness and strength of steel, but it also combines the lightweight benefits of aluminum.

In addition, metal materials are a cost-effective material with the functions of fireproof, moisture-proof, and mildew-proof. When buying, measure the weight of the alloy keel by hand to see if there are obvious cracks in the keel. You can also press the keel to see the endurance.

**Buy a kitchen and bathroom ceiling？Installation precautions 2: Check whether the panel is flat and whether the paint layer is smooth.

The high-quality gusset has a smooth surface, uniform color, no fading, no oxidation, and the card edge is straight and elastic.

**Buy a kitchen and bathroom ceiling？Installation precautions three: integrated appliances used in the ceiling.

Due to the oily and humid space in the kitchen and bathroom, the safety performance of the appliances is particularly demanding. When choosing an electrical appliance, you should pay attention to whether it is exposed to electricity when it encounters water, what protection features are used in the design, and whether the lighting heater will overheat. If the appliance is not in harmony with the early repair, there will be problems after a year or two, and it will be troublesome to replace it.

Special attention is paid to the fact that some brand products are produced by OEMs, due to the low cost of the products, in order to reduce costs, many electrical materials come from low-end manufacturers, so they often cannot adapt to the humid environment of the bathroom. Their safety, heating effectiveness and service life are concerning.

Consumers are advised to avoid purchasing such products.

The above is true**Buy a kitchen and bathroom ceiling？What are the precautions for installation? I hope it can help everyone.

You can get it for free

1. According to the design elevation, the line should be played on the wall around it, and the line should be clear, the position should be accurate, and the allowable deviation of its level should be 5mm.

2. Fix the side keel along the elevation line, the role of the side keel is the sealing of the edge of the ceiling, the common specification of the side keel is 25*25mm, its color should be the same as the PVC gusset, and the side keel is mostly fixed on the wall column with cement nails.

3. Determine the keel position line, because each PVC gusset is a formed veneer, generally can not be cut into blocks, in order to ensure the integrity of the ceiling finish and installation reliability, it is necessary to arrange the structural size of the ceiling skeleton according to the size of the aluminum gusset and the area size of the ceiling. The basic arrangement of the PVC gusset veneer is: the plate combination should be complete, the surrounding edge should be symmetrical and even, and the arranged keel position line should be drawn on the top of the elevation line.

4. The spacing of the main keel hanging point should be selected according to the recommended series of design, and the middle part should be arched, and the height of the keel arch should not be less than 1 200 of the room span. After the installation of the main keel, the position and height should be corrected in time. To control the flattening of the keel, first of all, you should pull out the longitudinal and horizontal elevation control line, start from one end, and adjust the suspension height of the boom while installing.

After the large surface is flattened, adjust some single keels with curved warped edges until the smoothing meets the requirements.

5. The boom should be straight and have sufficient bearing capacity. When the boom needs to be lengthened, it must be lap welded firmly, and the weld must be uniform and full. For anti-rust treatment, the boom shall not exceed 300mm from the end of the main keel, otherwise the boom should be added to avoid the main keel falling, and the secondary keel (the same as the middle keel or small keel) should be installed close to the main keel.

6. Comprehensively correct the position and levelness of the main and secondary keels. The connectors should be installed in dislocation, and the installed ceiling skeleton should be firm and reliable, and the next step of construction can only be carried out after meeting the relevant specifications.

7. When installing the PVC gusset, the secondary bone should be straightened. The gusset plate should be flat and not warped, and the flat error of the ceiling plane should not exceed 5mm.

1. The keel should be flat when installed, and the spacing deviation should be controlled within the allowable range.

2. When installing the keel, the direction of the keel should be determined according to the design direction of the ceiling measurement construction drawing, and after it is determined, the keel distance line and punching point should be marked on the roof.

3. The depth of the hammer should not exceed 4 cm to prevent damage to the wires embedded in the wall. Once the punch is ready, the matching internal expansion is inflated into the hole.

4. According to the height of the corners, the galvanized copper wire is sawed, and the keel is cut according to the length of the room, and the keel is fixed on the copper wire with a nut.

5. When laying the ceiling, it should also be prepared according to the measurement construction drawing, the plate shape and color should be prepared in order, and when the board is arranged, the gusset plate should be tight and seamless with the corners, and the control line holes should be marked.

6. The concealed ceiling must be equipped with manholes, many people do not set up manholes in the kitchen and bathroom ceilings in home decoration, and feel that they affect the appearance, but they do not know that once the pipeline equipment in the ceiling fails, it cannot be checked to determine what the part is, what is the reason, and it cannot be repaired. Therefore, it is better to set up manholes for the ceiling of laying pipelines, and you can choose to be in a more hidden and easy to inspect part, and carry out artistic treatment of the manholes, such as combining them with lamps or decorations.