Is it good to use drywall for partition walls? What are the steps for a drywall partition wall?

When I decorate the budget is not high, there are some houses that need to be designed and decorated to choose paper gypsum board as a partition wall. In fact, how to use paper gypsum board to make partition walls in some dry spaces such as large living rooms, bedrooms, small study rooms, etc., the actual effect is still very good, the cost performance is relatively high, and the service life is also very long. However, how to use gypsum board to make the partition wall of the bathroom in the room, so that the service life will be reduced due to the dampness and coldness.

When making a light steel keel partition wall, it is necessary to understand the specific process steps in advance.

How about using plaster wire for partition walls? Most people feel that the partition wall is not very durable, and the first gypsum board material is very lightweight, so you can not suspend the hanging object, if you install it in place, there may be a risk of collapse after a long time. Secondly, the sound insulation effect of the gypsum board is not particularly good, if it is used as a partition wall, the middle of the gypsum board must be filled, which will also increase the cost of decoration.

Zhufan feels that if it is calculated in this way, the cost performance is not particularly high, and the service life of the application will not be long.

According to the data survey report, the partition wall made of gypsum board is still very durable, and there is no problem in applying it for six or seven years under normal circumstances, but it still depends on the use of gypsum board, because the fatal disadvantage of gypsum board is that it is not resistant to water, if it is in a humid environment. It will break down in two or three years. Therefore, in the humid environment of the bathroom and kitchen, it is not recommended that you use paper gypsum board as a partition wall.

Gypsum board as a partition wall is only suitable for dry places such as living rooms and bedrooms, and its service life may be very long.

What are the steps of light steel keel partition wall? If you want to assemble a light steel keel partition wall, in fact, the method is very simple, the operation steps are as follows: be sure to choose a suitable model of gypsum board, the current market is divided into two types, one is to do decoration ceiling, one is to do both partition wall and decoration ceiling, I recommend the second kind.

It is to paint the interior wall putty powder on the wall, in order to maintain the wall clean and clean, which is convenient for installation in the middle and later stages. It is to assemble the main keel, near the gypsum board on the paper surface, assemble the plastic, and the total width of the plastic is finally consistent with the main keel. It is to use a nail projectile to fix the gypsum board on the main keel.

The above introduces you to some relevant information about whether it is good to use gypsum board partition wall for interior decoration, and it is not difficult to see through the content of this information that if you want to get better results for gypsum board partition wall, you must decorate the interior in a suitable natural environment. In addition, the content of the article also introduces the production steps of the light steel keel partition wall, and you can continue to refer to the light steel keel partition wall.

Hello, gypsum board can be used as a partition wall, the operation is simple, and the price is cheap. To make a partition wall of gypsum board, we must first determine the position of the gypsum board, fix the wooden keel on the ground and the top, and then fix the vertical keel in the groove of the upper and lower keel, fix it with iron wire, and finally hit the gypsum board on the vertical keel with nails, and then glue the keel to seal it again. Finally, you can paint the drywall in your favorite color.

I think it is very good to use gypsum board as a partition wall, gypsum board is light in weight and high in strength, it is convenient to make a partition wall and the effect is better, and it is more affordable.

Look at personal needs, if the noise requirements are not so high, use gypsum board as a partition wall, but you need to choose gypsum board that meets the requirements of fire protection standards as a partition wall, after delineating the area, directly fix the upper and lower ends of gypsum board, and then do the outer layer.

1. Brick wall.

1. Advantages: 1) Firm, good sound insulation effect, easy to construct.

2) Air conditioning and heating are not easy to lose.

2. Disadvantages: afraid of moisture.

Second, light steel keel gypsum board partition wall.

1. Advantages: 1) Dry operation, safe, construction is convenient, fast, on-demand combination, sensitive division of space, and easy to remove, which can effectively save labor and speed up the construction progress.

2) Light weight and strength can meet the application requirements.

3) Decrease in revenue. The chemical and physical properties are stable, and the expansion rate is small in the process of boring and hygroscopic absorption, which effectively restrains the defects of joint cracking caused by the large expansion and contraction of other domestic lightweight plates in the application process. In addition, due to its own structure, deformation joints can be set casually, so it can be used in parts that are prone to subtle displacement or subtle vibration.

4) The decoration effect is good, the appearance is diverse, the decoration is bento, and the use is universal.

5) Reasonable economy and reduce waste.

2. Disadvantages: It can be used as a room partition wall but not as a partition wall between the bathroom and the kitchen, because it cannot be pasted with wall tiles.

First, the nature is different.

1. Brick wall nature: a wall made of bricks and concrete.

2. Gypsum board partition wall nature: lightweight partition wall composed of gypsum sheet or hollow gypsum strip board.

Second, the characteristics are different.

1. Characteristics of brick wall: it has good load-bearing, heat preservation, heat insulation, sound insulation, fire prevention, durability and other properties, and is widely used in low-rise and multi-storey houses.

2. Characteristics of gypsum board partition wall: it can be used to separate indoor space, and has the characteristics of simple structure, easy processing and installation.

First of all, there are some advantages of wall tiles, the use of wall tiles to stick to the wall is very firm, and it is also very good in terms of sound insulation, and the construction is also very simple. But the wall tiles, and he is more afraid of moisture. Light steel keel gypsum board partition wall is also a more common material in home decoration, and his construction is very simple and fast.

It is a layman to say that the sound insulation of the gypsum board partition wall is poor, and if it is handled well, the effect of the gypsum board partition wall is far more than that of the brick wall.

The brick walls are heavy and the energy consumption is high.

The gypsum board partition wall is convenient for construction and simple to operate, but the wall is poorly solid. The brick wall is solid, but the construction will be more cumbersome and self-important.

In addition, about the sound insulation problem, gypsum board partition wall can be solved by filling glass wool, the effect is excellent, for the waterproof problem, each manufacturer also has a special waterproof board development, can solve this problem well.

Light steel keel gypsum board, light texture, fast construction, less process, the construction site is cleaner, but the sound insulation is not good, the waterproof power is poor, and the insulation effect is poor.

The red brick wall is heavier, sometimes the building structure is not allowed to be used, the construction is slow, the construction site is dirty, but the sound insulation is very good, the wall will not be damaged by water, and the insulation is better.

For friends who have decorated the house, gypsum board is very well understood, it is a decoration material often used in decoration materials, and the role is very heavy, very important, not only in the ceiling will be used to it, but also can be used gypsum board partition wall, so, with the stone sail beam poor plaster board partition wall how to do? What are the points of using plasterboard partition walls?

Step 1, wall position pay-off.

According to our requirements, design out the wall position, and then pull out the wall line on the ground. Then measure the width of the elastic line and binning, and the upper and lower parts of the partition wall and the junction on both sides. The position of the elastic line should be clear.

According to a series of settings, the position of the vertical keel and the cross brace is clarified.

Step 2, wall mat construction.

Step 3, the device is fixed with a nail after being installed along the ground and along the top keel, and the spacing of the nail is 900mm, and the pipe part laid underground should be avoided when the nail is shot.

Step 4, device vertical keel.

According to the clear keel spacing, then draw the binning line. To correct and modify, before installing the cover panel, it is necessary to see whether the spacer skeleton is strong, see whether the various equipment is complete, and understand the installation position of the pipeline. If there is a problem with the skin, it is necessary to strengthen the fixation in time.

Step 5, fix the door and window frame, the door and window frame should be installed according to the design orientation, and should be connected with the vertical keel, along the ground, along the top keel.

Step 6, install gypsum board, to choose the vertical orientation, keel slag on both sides of the gypsum board to leave a little gap. The wall around the top of the partition wall has a 3mm notch.

Step 7, seam treatment.

Step 8, after the installation is completed, the wall is selected with brush grout or paint, pasting or veneer.

Point 1: The connection between the spacer skeleton and the matrix structure should be strong and there should be no loose appearance;

Point 2: Post and fix the cover panel with nails or screws, the appearance should be flat, and the posted cover panel should not be delaminated;

Point 3: The material of the partition wall with gypsum board shall not have shortcomings such as pollution, cracking, lack of edges, corner drops, and hammer wounds;

Point 4: The direction of gypsum board laying should be accurate, the device should be strong, the joints should be dense, lubricated, and the appearance should be flat;

Point 5: Plywood shall not have a planing through;

Many families will use gypsum board when decorating, and the role of gypsum board partition wall is very large, with sound insulation and fire prevention.

You can get it for free

When people are decorating a new house, they may need to build a wall, and some people choose gypsum board as the partition wall material, so what about the gypsum board partition wall? What other partition wall materials can we choose besides drywall? Next, I will give you a brief introduction to whether the gypsum board partition wall is good or not and what are the partition wall materials.

First, the gypsum board partition wall is good.

1. Gypsum board partition wall is a lightweight partition wall material widely used in the world, which is mainly made of gypsum sheet and mineral wool board and other materials.

2. The gypsum board partition wall has a good sound insulation effect, and its sound insulation index is 40-50 decibels; As a non-combustible gypsum board, it also has certain fire resistance; Although gypsum board partition wall is a lightweight partition wall material, it has high strength, generally speaking, gypsum board with a thickness of 12mm can load more than 500N; The stone simple plaster board partition wall also has the advantages of small shrinkage, good decorative effect, and insect-proof.

3. The moisture-proof performance of the gypsum board partition wall is poor, and it is easy to be deformed due to moisture; Because its hardness is not enough, the mountain will crack after a long time; Moreover, the load-bearing capacity of gypsum board is insufficient, and it is not possible to suspend heavy objects; Although the decorative effect of gypsum board is strong, it will cause the gypsum board to turn yellow after being used for a long time, which will affect the overall decorative effect.

2. What are the partition wall materials?

1. Light-quality bricks.

Light-quality bricks are mainly made of quartz calcium silicon, concrete and other materials, belonging to A-class non-combustible materials, good fire performance, because of its porous structure makes lightweight bricks have sound insulation, heat preservation, impermeability performance, light quality bricks also have the advantages of durability and environmental protection. 2. Glass bricks.

Glass brick is made of transparent or colored glass materials of glass products, it is mainly used as a wall, partition, glass brick has solid glass, hollow glass brick and other different types, glass brick is not contained in any harmful substances of energy-saving and environmental protection materials, with dustproof and moisture-proof, good sound insulation effect and other advantages, its lighting performance is also better. 3. Combination of glass and wooden frame or aluminum alloy frame.

The combination of glass and wooden frame or aluminum alloy frame is a popular partition wall material today, which can not only play a role in distinguishing the space, but also meet people's lighting needs, and this partition wall material also has the advantages of good moisture and fire prevention.

I summarize: partition wall materials and partition boards, low walls, wood, etc., here I will not go into detail, about gypsum board partition wall is good and what are the partition wall materials I will briefly introduce here, I hope that after reading this article, I can provide you with reference and help when choosing partition wall materials in the future.

Gypsum board partition wall is mainly used to divide the indoor space, is one of the good partition materials, using gypsum sheet, hollow gypsum slat, light steel keel, etc., with simple structure, lightweight, easy to process and install, fire prevention, sound insulation, humidity adjustment and other characteristics, so by many decoration people love, so such as the gypsum board partition wall practice tutorial is what? Let's take a look.

1. Site preparation.

Gypsum board partition wall should be installed before the installation site is treated, it needs to be dry, no water on the ground, no dirt and debris on the site, etc., if there is cement on the installation position, the ground is uneven, the site needs to be removed, and repaired.

2. Check the materials.

The formal installation and installation of gypsum board partition wall needs to check all the materials, including gypsum board, light steel keel, caulking material and other materials, specifications and quantities, basically correct before they can be carried out, but also need to ensure the quality of the material itself.

3. Keel installation.

It is necessary to fix the upper and lower U-shaped keels on the ceiling and the floor, and the C-shaped keel is stuck into it, and then correct the verticality of the C-shaped keel, of course, the U-shaped and C-shaped keels can not be completely fixed between them, so that it is convenient for the gypsum board to be moderately adjusted, and the gypsum board on one side is installed first, and then the gypsum board on the other side is installed after the installation and acceptance of the inner pipeline.

4. Door and window openings.

The U-shaped keel along the ground is disconnected at the position of the door opening, and the additional C-shaped keel is erected on both sides, and the U-shaped keel is closed, and the C-shaped trapped silver keel on the door and window frame is 150mm away from the place to add a vertical keel to strengthen.

5. Keel treatment at the hanging weight.

Suspend the position of the equipment, strengthen the keel, and install flat plate members to secure the equipment.

6. Pipeline installation.

The pipes and sockets in the partition wall need to be installed on the gypsum board on the installation side.

7. Filling installation.

Rock wool, glass wool and other fillers are used, and they can be installed firmly and will not be loose or sagging.

8. Gypsum board installation.

Installed in the order of the direction of the C-shaped keel, the adjacent two gypsum boards are naturally close together, more than 10mm from the ground, and the top of the floor slab should be tight without leaving gaps, and the single-layer gypsum board on both sides of the keel and the two layers of gypsum board on the same side are installed with staggered seams.

9. Gypsum board surface treatment.

Including seam treatment, plastering treatment, etc.

10. Gypsum board surface decoration.

Can be decorated with vinyl wallpaper.

Summary: The above is an introduction to what is the gypsum board partition wall practice tutorial, I hope the content shared can give you some reference, if you want to know more about related knowledge, you can **** Qeeka Home information. Slag ruler cherry blossoms.