What are the construction processes of light steel keel gypsum board partition wall? How many years

Light partition wall construction pay-off — installation of door opening frame — assembly along the top of the main keel.

And along the ground keel vertical keel file - assembly vertical keel - assembly horizontal main keel card file - assembly gypsum cover panel - engineering construction.

Joints - integral surface engineering construction 1Fields of application: This specification is applicable to the construction of skeleton partition walls in the lightweight wallboard engineering of industrial and industrial building decoration. Other partition wall projects with light steel structure as the frame and wood veneer of different materials can be implemented with reference.

Raw materials for the preparation of construction, light steel keel partition walls.

Main parts: along the top of the main keel, along the ground keel, lifting the main keel, vertical keel, cross brace light steel keel specifications and models.

Model specifications, material surface treatment, etc. must meet the requirements of design and relevant technical specifications and standards.

drywall. How many years can a partition wall be used? Now most of the home decoration choose to use gypsum board as a decoration partition, with gypsum board as a decoration partition, the service life is still relatively long, most of the application for 20 years, there is no problem.

This 20 years is not a fixed standard value, if the gypsum board partition wall has been in a damp situation, it will not be able to take 20 years, and it is likely that problems will occur in three or four years. If you do it properly, you might be able to use it a little longer. Therefore, after installing the gypsum board partition wall, it must be well maintained.

The material itself is still relatively good, the actual effect of fire and sound insulation is very good, and the construction of the project is also very convenient, the construction cycle time of the project is short, and the decoration cost can be greatly saved.

In fact, it still depends on what kind of material you choose, if it is the main keel of the general small snowflake, one square meter is around 20 yuan. If it is an ordinary two-sided gypsum board, one square meter is almost 20 yuan, but at this time, the labor cost should be considered, and the labor cost is about 20 30 yuan per square meter. If it is a high-end material, the price is very expensive, 90 yuan to 160 yuan per square meter.

There is also a more professional partition wall system software, which costs about 200 yuan for one square meter.

There are many kinds of processes for light steel keel gypsum board partition walls, which need to be decorated according to the suggestions of the construction team masters, and can be used for at least 15 years under normal circumstances.

There is no special craftsmanship in this, the main thing is to ensure safety, and it can be arranged according to your own decoration style, and it can be used for at least twenty or thirty years.

During construction, it is necessary to measure first, and then place 5 mm of rubber around the perimeter, and pay attention to the width of the keel, and the hub should be fixed, and it should be fixed with nails, and the distance should be kept within 600 mm. If the installation is good, it will last at least 30 to 50 years.

It can be used for at least 30 years, and you must pay attention to the specific thickness during construction, pay attention to the direction of cutting, and pay attention to safety issues.

In our daily life, many people have seen the partition wall construction process of light steel keel gypsum board, but a small number of people do not know what are the steps of the construction process of light steel keel gypsum board partition wall? Today, I will tell you what is the construction process of light steel keel gypsum board partition wall? I hope it can help everyone.

First, the light steel keel gypsum board construction technology.

1. First of all, according to the needs of the design, we need to mark the lead on the wall and the door, and we need to mark the specific location, so as to facilitate the construction of the light steel keel gypsum board partition wall in the later stage.

2. The quality of gypsum board, specifications and other quality of construction preparation are certain requirements, and the quality of the materials must be prepared before this.

3. During the construction, we must check whether there is a problem with the wall and the related lines, whether there is a deviation in the position, whether it will interfere with the line, and we must avoid the line to be able to construct the light steel keel gypsum board partition wall.

4. The practice of light steel keel gypsum board partition wall is to put 5 mm of rubber around the gypsum board to crack Huai, and the width must be consistent with the keel.

5. Then fix the keel in the designated area, that is to say, fix it in the area of the mark, and use the nail to fix it after fixing, and the spacing between the nail and the nail must be less than 600 mm, if it is fixed at such a density, it will be very firm.

6. The spacing between the keel and the keel must be less than 400 mm.

7. After that, we will install the main keel, and when the main keel is installed, it should be along the wall, and then the lower end must have two extended edges, and the keel along the edge, so that the main keel can be completely fixed.

The above is a summary of the relevant content and information about the construction process of light steel keel gypsum board compartment, I hope it can help you. If you have any other questions, you can leave a message at the bottom of the platform, and we will solve the problem for you in time. Finally, if you have any questions about home furnishing or home decoration, you can pay more attention to Qeeka Home.