It is said that these 14 kinds of tile laying methods are beautiful, what do you think

The variety of paving methods and the variety of styles can make it look good. Which paving method to choose should be chosen according to the actual situation and personal preferences.

One: the combined paving feels more exquisite.

Laying points: tiles of different sizes, styles and colors are paved according to a certain combination.

Suitable type: suitable for European style (European decoration renderings) style and country style, and the paving method is more abundant. Usually you can use marble or tiles with a slightly darker color than the main tile to be paved, and the surrounding edge of the ground is about 15 cm, so that the paving effect makes people feel that the material is more delicate and can better set off the atmosphere of the space.

Tips: The supporting products of the combined paving also include corrugated lines, ground parquet, etc. The corrugated line is generally made of dark tiles, and the antique bricks also have special supporting corrugated lines, which are mainly used around the ground or in the aisle entrance.

Floor threads, horn flowers, etc. are ground decorative paintings made of ceramic tiles, mainly used in the foyer, coffee table or under the dining table.

Two: horizontal or vertical paving is suitable for simple style.

Laying points: Paving in a way that the wall edges are parallel. The brick joints are aligned and leave no joints, and at the same time, they are treated with a grout that is close to the color of the bricks, which looks refreshing and neat.

Suitable type: Usually polished tiles, suitable for modern minimalist style.

Three: "human" glyph and irregular lines.

Laying points: Two adjacent rectangular tiles are paved at a 45-degree angle, and one side of one is paved in the middle of the long side of the other, just like the shape of the word "person". Or pave it into a completely irregular shape with mosaics, pebbles, etc.

Suitable type: "human" herringbone paving is a relatively new way of paving, suitable for personalized modern minimalist style home.

1.Dry paving method.

Dry paving method is one of the most commonly used floor tile paving, the specific method is to water the base layer after wetting, clean up the floating sand and debris on the ground, and use a dry cement mortar of one to three. Then pave and paste smoothly according to the horizontal line, put the brick on the mortar and then use the rubber hammer to vibrate it, this paving method can effectively avoid the phenomenon of bubbles and hollowing of the ground bricks, but the first aspect is more expensive, and the technical requirements are higher.

2.Wet paving method.

Wet paving method is a practice that many families will adopt, and the difference between it and dry paving method is to replace the dry cement mortar of one to three with ordinary water and cement mortar, so this practice is easy to produce bubbles in the paving process, affecting the service life of the floor tiles.

3.Corrugated wire laying method.

Wave wire, also known as waveguide wire, also known as lace or edge wire, etc., is mainly used around the ground or in aisle entrances and other places. Generally, it is a decorative line made along the edge of the wall on the block (ground), and the floor is added with different lines of color from the overall ground to increase the design effect.

4.Traditional paving.

The traditional method of paving tiles is to lay along the straight line, which is the most traditional method, when paving, the wall should be paved in a parallel way, the brick joints must be aligned without leaving joints, and at the same time, they also need to be treated with a similar color grout agent to the tile, which looks refreshing and neat.

1. There are several ways to apply tiles.

1. Dry paving method.

Dry paving method is to mix sand and cement in accordance with the ratio of 3:1 with a small amount of water, cement and sand as long as they are mixed to the viscosity that can be held into a ball by hand, and then the mixed sand cement is spread on the ground, the surface is smoothed with a flat plate, the cement with a very high viscosity is smeared on the back of the tile, the tile is put on the ground, and the rubber hammer is completed, and the dry paving method is mainly used for the paving of ground tiles. The thickness of the dry-paved mortar is large, the cost is high, the floor tiles are smooth, not easy to deform, not easy to hollow, and the effect is good.

2. Wet paving method.

Tiling methodThere is also a wet paving method, which is to mix sand and cement in a ratio of 2:1 and mix it with water, the amount of water should be more, so that the viscosity of sand and cement is higher, and then applied to the back of the tile soaked in water and pasted on the wall, and the wet paving is mainly used in the wall tile paving. In the process of solidification, the water evaporates in the wet laying method, which is prone to small bubbles and voids, resulting in hollowing.

Second, how to better pave the tiles.

Before preparing to lay tiles, we must first understand the characteristics of ceramic tiles, because there are many kinds of tiles, each kind of tile has different characteristics, and the treatment methods are also different, which is also a lot of tiles need to be soaked in water, some do not need to, and the time of soaking in water is also different, these are to understand, but also to understand the model, grade, size and color number of the tile.

To lay tiles, the first thing to do is to deal with the ground, and the flatness of the ground should be good. Tiles are generally made of cement with other things to do bonding, so when making cement, there should be a sticky feeling, and the cement can use the 325 model, and the effect is not bad.

Before laying, it is necessary to pre-pave, that is, to arrange the tiles on the ground first, to see how the effect is presented, to see how many tiles are needed, to see if there are any places that need to be cut, etc.

When laying, you need to leave some small gaps between the two tiles, this gap is for us to make adjustments, and this gap will be decorated with a beautiful joint.

Laying tiles must choose those more experienced workers, they are laying tiles almost every day, can be described as a master, they are very familiar with cement and other materials, consult with them can also buy cheaper and first-class ones, can save a lot of money, but also ensure the laying of tiles.

Summary: That's all about:Tiling methodThere are several and how to better pave the introduction of tiles, tiles are generally dry paving and wet paving, different methods are suitable for different occasions. In the process of tiling, these places can be better paved in order to do a good job.

Diamond paving:

The relatively unchanged wall tiles are pasted on the wall, and the finished surface after pasting is relatively more atmospheric and more high-grade, and it is on the rise year by year in European-style and American-style home decoration in recent years.

Some areas adopt the diamond-shaped paving method, generally when there are no windows or door openings on the wall, whether it is construction or finishing, it is relatively simple and easier to produce results.

For the wall with a window, if the method of diamond-shaped paving is also adopted, the window mouth is generally used as the wall brick to start, and the two sides are pasted, and the whole brick can be used to pave one side of the beginning, and the other side of the window (whether it is the side or the top side) is often not so coincidental, and it is generally impossible to just start with the whole brick, and there are some wall tiles at the water chestnut position may be very small in size, and the cutting and paving work are extremely difficult, unless it is a coincidence or the size is strictly accurate before opening the window hole.

This kind of construction, for the worker's technical requirements is quite high, but also very time-consuming, not only for the bricklayer's chamfered inner corner technology and paving technology requirements are very high, but also need to adjust each gap in time before the brick is dried to avoid serious unevenness.

"Work" font paving:

The I-shaped paving of tiles simply means that the tiles in the back row (or column) are aligned and parallel to the middle of each tile in the previous row (or column). As shown below:

Advantages of tile I-shaped paving: The tile I-shaped paving method is formed by imitating the paving method of wood flooring, and it is mostly used for the paving of a few types of tiles such as imitation wood tiles.

The chaotic "work" font will visually have a sense of staggeredness, but the monotony also highlights the solemn, calm and heavy effect; Weaken the sense of oppression brought by the narrow space of the aisle.

Disadvantages of tile I-shaped paving: "work" paving is cumbersome in the process, and the requirements for the workers' process are higher in construction.

Seam paving: Because the shape of tiles is a regular square or rectangle, the most basic and easiest way to pave is to pave in joints.

There are two ways to pave the seams: one is horizontal, which appears to be open; One is vertical, which makes the space appear tall, which is caused by the visual effect of the lines.

Paving methods, tiles, tile paving, several methods, paving tiles Introduction to several ceramic tile paving methods, tiles, tile paving, several methods, paving tiles Introduction to several ceramic tile paving methods.

A few days ago, I went to the community and found that my neighbor's house was being renovated, and I wanted to go in and have a look, and found that my neighbor's house was all tiled. I thought that my neighbor had really spent a lot of money to renovate the house, but after talking to the neighbor, I realized that it was a project given by the decoration company.

This is the site of the balcony tiling. This is really a big project, I see that the master's craftsmanship is good, and he is very serious. This is the method of dry-laying tiles, which makes it more solid.

Level the ground before tiling. The next step is to apply cement mortar, which can be better bonded.

Cement mortar not only has the effect of bonding, but also makes the tile stronger.

When pasting tiles, you must leave gaps, and you must do beautiful seams in the future.

Once the tiles are attached, hit them with a hammer.

After pasting, don't forget to knock each one through.

Look at the tiles on the wall.

It's the restaurant and the whole house is tiled all over.

This is the effect of the bathroom. This is the bathroom wall tile, look at the master's craftsmanship, really good.

A partition is also designed here, which is very convenient and practical to use in the future.

1. Cement should be used for tiling, and special attention should be paid to those who are contracted to the construction team, they are not responsible for maintenance, and they are often shoddy, with inferior cement, each bag can be less than 5 yuan, and they can earn about 200 yuan more.

2. On a smooth cement wall, the ground is calendered. Before laying bricks, the walls and floors should be brushed.

Do not put bricks directly on top of the wall paint.

3. In the original tile floor on the new floor tiles, the original floor tiles must be knocked down first and then paved! Otherwise, it will be difficult to attach.

4. Floor tiles are often paved dry, and wall tiles are paved wet.

5. Use light steel keel, cement board to wrap riser, paste tiles on cement board, and hang barbed wire. Otherwise, it will be easy to fall.

6. Special tools are required for punching holes in ceramic tiles.

7. The technical requirements for workers are higher, otherwise there will be hollow drums, and he must be asked if he is sure before the shop! ! Otherwise, it's a big problem! Be sure to use good cement.

8. The kitchen and bathroom should be made of non-slip tiles. If the living room has a large population flow, choose ceramic tiles that are wear-resistant. Flooring is also available for low flow rates.

9. During construction, the bricks should be carefully selected, and the same size should be grouped together and used on a wall. If you don't do this and the skin, the quality of the bricks you buy is not very good, it will cause) uneven joints.

10. The height difference between the floor and the floor tile transition, the height difference is not large, and it can be solved with a door stone. The height difference is large, and the floor can be solved with cement leveling or paving treasure.

In life, when decorating a house, ceramic tiles are an important material in the decoration of our house. Over time, ceramic tiles have become a very popular decorative item. So,Tile laying skillsWhat is it?

What should I pay attention to when laying tiles?

One,Tile laying skills

Tile laying skillstile joints.

Because tiles can expand and shrink due to ambient temperature, etc., we have to leave enough space between each tile when we place it. For example, when laying bricks with joints, it is better to leave a space of millimeters, and the space between the tiles is about 3-5 millimeters.

Tile laying skillsCaulking.

It is better to fill the tiles after 24 hours of mosaic. Before filling the joints, clean the tile grooves of debris. If the environment is very hot during construction, we have to sprinkle a little water on the surface of the tiles.

Tile laying skillsDip into the tiles.

Before placing the tiles, it is better to clean the tiles and soak them in water. The tiles must be soaked for more than 2 hours, and then allowed to dry the moisture on the surface of the tiles before the paving and diversion begins.

IITile laying skills - precautions for paving

1. Find a standard point.

Always check the flatness of the floor before placing the tiles. If the floor is uneven, stop placing it immediately. Of course, the most important thing in laying tiles is to find standard points, the joints must be even, and they should not be unsuitable.

Generally speaking, after fixing we can find the bottom plate.

2. Carry out waterproof treatment.

Since the replacement of ceramic tiles usually destroys the original impermeable layer of cement mortar, it is necessary to pre-waterproof. For example, before paving, an impermeable layer of asphalt can be applied, and the cement of the joints between the bricks must also be replaced.

Soak the floor tiles for about half a day, check if there is enough slope on the bathroom floor, if there is water. Masonry can only be carried out after it has been confirmed. When the steps of laying the tiles are completed, the circuit board is covered with cardboard, and it takes at least a day to walk on the bricks.

You can get it for free