In the process of wall decoration, which walls must be hung with nets?

If it is a light wall, it is necessary to hang steel wire mesh, and the tiles are paved after plastering. Most of the light walls have good water absorption, and if the steel wire mesh is not hung, the wall is easy to cement mortar.

The water in the water is absorbed, so it is easy to cause the wall tiles to fall off after a long time. As long as it is mentioned that barbed wire, or other mesh and other materials, are basically used for wall decoration, mainly to better protect the wall, to avoid fine decoration, over time, the wall gradually appears a series of quality problems. Therefore, barbed wire will be used in the decoration.

Due to the different shrinkage of the material, it is easy to produce cracks, and the corresponding tensile force will be generated during the formation of cracks. At this time, we attach steel wire mesh to the surface layer to counteract the tensile force and prevent the formation of cracks. This prevents cracking of the area to a certain extent.

After the use of aerated bricks stacking, due to the need for plastering, the aerated brick plastering layer is too thin, withShear wallsThe gaps between them are easy to crack, etc., so it is necessary to use barbed wire cloth to cement sand ash to be well bonded with aerated bricks. Check that there are no cracks on the wall and the hollowing problem before constructionPutty；When the putty construction is completed, do not open the window for ventilation, so that it is naturally dry and then open the window for ventilation, which can prevent the cracking of the putty layer due to too dry weather or thermal expansion and contraction to a certain extent。Some smallpox.

is made of drywall.

If there is no screen, it will soon crack, and the wall is also made of gauze, and the ground with seams must be pasted to avoid gaps.

The main reason for cracking is that the tension generated by dry shrinkage is concentrated in the weak links of the stucco layer, resulting in cracks in the weak links, and the cracks are generated, one is unsightly, affecting the mood of the residents, and the other is that the water vapor and some other substances in the air will enter the stucco layer along the cracks, and various reactions will occur after a long time, which is easy to cause subsequent problems such as the stucco layer bulging and falling off. Full hanging steel wire mesh is on the surface of the external wall insulation layer to play an anti-crack and waterproof role, generally in the insulation layer outside is veneer brick or stone when hanging steel wire mesh, when the exterior wall emulsion paint, laying alkali-resistant mesh cloth.

In fact, many times we must hang nets on some walls in the room, so that it can also be convenient for our daily comparisons to be more reasonable, and generally speaking, it will be more complete and look more atmospheric.

Plastering hanging nets. During the civil construction of some walls, the concrete deformation is large because of the formwork expansion mold, and it needs to be readjusted by local thickening plastering in the later stage. Generally speaking, if the thickness of the plaster is more than three centimeters, it is very easy to cause cracking in the later stage, and it is necessary to add a layer of fiberglass mesh for protection.

Generally, it is often used at the junction of the old and new walls, between the new walls and columns, and the bathroom walls. Prevent the wall from cracking, so that the mortar has higher strength and better compactness, which is equivalent to turning concrete into reinforced concrete (of course, much worse).

During the civil construction of part of the wall, due to the expansion of the formwork, the concrete deformation is large, and it needs to be adjusted and treated by local thickening and plastering in the later stage. Generally speaking, the thickness of the plaster is more than 3 cm, which is easy to lead to cracking in the later stage, and it needs to be protected by a layer of fiberglass mesh.

The new masonry wall is plastered and hung with steel wire mesh, and the wall is decorated in the later stage, and the gypsum is leveled and hung with fiberglass mesh. Also, when scraping putty on the wall before, it was really good to use and hung all over the wall. These can reduce the cracking of the wall, as long as the quality is passed, the glass mesh cloth can be hung generally.

Batch putty happens in every home when decorating. Because many decoration surfaces need to be putty, such as painting latex paint or pasting wallpaper. Except for the wall that needs to be tiled, all parts are putty.

The wall putty powder hanging net is to hang the grid cloth when the wall is scraped and leveled, and the putty powder completely covers the grid cloth. This prevents cracking of the putty layer.

The first treatment made the excess sand and ash of the old wall about 10 cm wide. The joints are filled with sand-lime cement. Then the steel wire mesh is scraped and filled with cement and sand ash.

Before scraping putty 2 times, make a micro-mesh plaster with white latex and scrape it flat. Then make kraft paper to stick to the seams. The wall can effectively prevent cracking or hang white mesh cloth, and the wall hanging mesh cloth is not absolute, and it is decided according to the actual situation.

Today, I will probably tell you that I have been doing this for some years, and almost every house in the past will have cracks in the wall. Many of the old communities, most of them will have more or less the phenomenon of foundation sinking, followed by the cracking of the wall, this crack is normal can not be dealt with, even the early hanging net is not good, mainly the wall is slow cracking, this time it is disposed of, and this situation will appear again after a while.

Originally, it was possible to divide the gap around it equally, and the best thing to do is to leave the gap in one direction; That is, one side of the window frame is against the wall, and the gap on the other side is wider, at least one side can completely avoid the problem of cracking on this side. The shrinkage stress of different materials is also different, such as brick wall and gyppool partition wall, the shrinkage of the two is different, and the tensile force on the stucco layer is also different, so cracks will appear.

I personally feel that it is needed, because the hanging net can fix the wall, and in the case of cracks in the wall, there will be no cracks in the place where the net is hung, and the meaning of hanging the net in the whole house is to fix some putty on the wall to prevent these putty from cracking.

It is very necessary to hang a net on the wall. Because hanging nets can make your wall stronger, and it will also make your wall more flat.

Hanging the net at the connection between the old and new walls can ensure the firmness of the wall and prevent cracking in the future. There will be a lot of horizontal grooves and vertical grooves hanging on the net at the hydropower slotting, which is also to prevent the wall from cracking in the future.

Hello, the tile is covered with a special steel wire mesh, if it is a large net with chemical fiber for hanging putty, about a meter wide, a roll of about 50 meters, dozens of dollars. Put cracks in the wall.

In order to make the handover between the new wall and the old wall stronger.

When decorating, must the wall be hung with a net?

First, why should the wall be hung with nets?

The main reasons for hanging nets on the wall during decoration are as follows:

1. The main function of hanging the net is to ensure the firmness of the wall, after all, the wall is not necessarily completely strong when the developer does it.

2. It can prevent the new wall from falling off in the later stage.

Second, what kind of wall needs to be hung with nets.

Although hanging nets is more important, it does not mean that all the walls of the home should be hung with nets, only some special places need them. In the construction process of decoration, there are strict requirements for wall hanging nets

1. The light wall must be hung with steel wire mesh, and the tiles must be paved after plastering. Most of the light wall has a high water absorption rate, if you do not hang the steel wire mesh, then the water in the cement mortar will soon be absorbed by the wall, causing the wall tiles to fall off easily.

2. At the junction of the old and new walls, steel wire mesh must be hung for pulling and jointing, and then tiles must be paved.

3. After the hydropower is slotted, it must be treated with a hanging network.

1. Home network wiring.

Network cabling is very important, and the installation of network equipment and the formation of home networks in the later stage rely on network cabling.

no1.Choose a network cable with high standards.

It is recommended to use Category 6 network cables for home network wiring, which support more than Gigabit transmission rates and can be used to build Gigabit home area networks. It is recommended to choose six types of network cables from large manufacturers, which are more reliable and guaranteed in quality.

From the appearance of the six types of network cables, the skin of the network cable has a logo, and there is a cross skeleton to prevent crosstalk, which is thicker than the ordinary super five network cables.

no2.Network cabling should be in place.

With the weak current box as the center, the weak current box is placed with optical modems, switches, or PoE AC routers.

A network cable needs to be deployed from the weak current box to each room;

From the weak current box to the TV cabinet (multi-** center), at least Zheng Meng should be laid 3 network cables, one is connected to the router, one is connected to the IPTV TV box, and one is connected to the living room computer.

2. Selection of network equipment.

There are two sets of schemes provided here, both of which adopt the above cabling scheme:

Best solution: The POE AC router can achieve whole-house coverage of wireless Wi-Fi signals and seamless roaming of wireless signals in the way of AP panels in each room.

Conventional solution: switch multiple wireless routers, or cascade wireless routers to achieve full coverage of home wireless Wi-Fi signals.