Do rough houses need wall leveling? How do I level it?

Updated on home 2024-07-13
7 answers
  1. Anonymous users2024-02-12

    Does the rough room have to be leveled by the walls? The embryo room is based on different indoor spaces, and it is necessary to do leveling to solve it, and the key is to look at the embryo roomcement mortar, and the main body of the project bondingCompressive strengthThe wall is relatively loose and must be scraped again. Rough room decoration, the wall must be scraped flat to solve, this process must be some, different interior space decoration, the flatness of the wall.

    The regulations are very high, and the wall is not leveled to solve the problem, which endangers the quality of decoration, and it is not a stronger decorative effect, so the wall decoration and leveling procedure cannot be omitted.

    Naturally, for customers who do not understand decoration, they are not aware of the adverse effects of the decorative design of the wall without leveling, and it is very easy to have general product quality problems. The first item of the new house decoration is the toilet that requires more water, the toilet decoration must be changed to water, circuit transformation, the installation of water and electricity, the wall pavement cement mortar has different degrees of damage, like this indoor space decoration, the wall, the pavement has not been scraped to solve the problem, there is no way to carry out the rear decoration design, so leveling the wall pavement is necessary.

    Only the wall pavement is smooth and clean, and the next steps can be carried out. Wall decoration, check the wall cement mortar before the operation, bond the compressive strength with the main project, scratch it on the wall with a car key, the wall is only a milky white mark, this wall does not need to be leveled, for example, use the car key to scratch on the wall, a crack occurs on the wall, indicating that the cement mortar, and the wall structure bonding is not very strong, shovel off the loose wall cement mortar, purchase a special leveling cement mortar, and scrape the wall again.

    The total area is more, that is, the overall indoor space wall is different, the wall before the decoration, there is also a whole process of leveling solution, but the use is not leveling cement mortar, the use of putty powder.

    For example, the wall decoration of the large living room or bedroom shows that the wall is not very flatIn this case, it is not possible to decorate immediately, it is very easy to have product quality problems, and the bonding is not very strong, so use putty powder to scrape it flat, and then carry out wall decoration.

  2. Anonymous users2024-02-11

    I think it's needed, you can choose to level it with a right angle. It's to take a right triangle or draw a right triangle.

  3. Anonymous users2024-02-10

    Of course, it needs to be leveled. First we can hit the wall with a level, and then the unevenness can be repaired with plaster.

  4. Anonymous users2024-02-09

    Generally speaking, the rough house needs to be leveled by the wall; To relate the plaster, then fix it to the wall surface, and then scrape it off with aluminum. You can go directly with your friends.

  5. Anonymous users2024-02-08

    In terms of wall decoration, construction is very important, and some people also want to know, does the rough house need wall leveling?

    When decorating the rough house, it is also necessary to level it, so that the construction will be smooth when the wall decoration is carried out in the later stage.

    Look for an app on the same wall. The non-uniformity is outside the specified range. If the data changes, the error does not exceed 3 mm per 2 meters of flatness.

    The construction process of finding smoothness is relatively straightforward. Just plaster, fix it to the wall with a tool, and scrape it off with aluminum. If the concave surface is too small, it is recommended to reassemble it.

    Attention does not work well because it tests the master's construction technique.

    The task of vertical leveling and vertical balancing is more complex than finding the smooth task. It is not only necessary to deal with the flatness of the wall in time, but also to ensure the double verticality of the wall. When plaster is attached to the wall as a building reference point, the distance between the two points should be 2m or more.

    The highest point of each origin is corrected to remain vertical level.

    It is based on the management of the two main points of the vertical plaster strip, the thickness of the plaster strip is higher than the thickness of the stripes. During construction, the splay method is used, and the width is usually within 50 mm.

    Wall leveling construction steps.

    Caulking gypsum riveting gypsum is mainly composed of, does the blank room need wall leveling for riveting joints and nail holes and the filling process of the gypsum board Fine gypsum powder is also suitable for interior wall holes, cracks, relays and flatness maintenance part. Patches are in bad places.

    Initial strength, fast curing speed, fire protection, equipped with thermal insulation, sound insulation and automatic and workability is good, the rough room needs wall leveling and high bonding strength in the market caulking gypsum, because the structure is simple, the operation is convenient, and the cost is low.

    The disadvantage of caulking plaster is that it widens the area, and the main caulking gypsum is made of fine gypsum powder, which has good aggregate properties, not strong hardness, poor flexibility, low water resistance, and is easy to peel off or crack later. Caulking plaster is only suitable for drywall joints, embossed horizontal repairs, trunking or part repairs.

    It is very important to find Tan Gaoping on the wall for any kind of wall, so that the later decoration effect can be good.

    You can get it for free

  6. Anonymous users2024-02-07

    Does the wall and floor of the rough house need to be leveled? If the wall and ground structure of a rough house does not meet the standard requirements, there will be big problems in daily life. For example, some homes even have large areas of peeling walls.

    But many owners don't know that the rough house must be leveled on the wall and floor? And how do you level the walls of a rough house? Let's learn together.

    If you plan to live here for a long time, you should raise the floor cushion. If you don't want to lay the floor, you can simply raise the base layer and cover it with cement sand.

    If it is a temporary residence and you want to not paste the tiles first, you only need to clean the original base layer and make about 2 cm of sand plaster film;

    If you are ready to use wooden floors in the future, you can reserve a paving height of about 15 mm, level it with sand plaster, and then cover it.

    The ground treatment of a rough house is just to make a layer of sand and ash, and the surface is flat. The height is usually set at a height of about 50mm. Determine what to do at this time based on the owner's future arrangements.

    If the tiles are re-laid, it is necessary to leave a laying height of more than 30mm; If it is a flooring (the thickness of a quiet wooden floor is about 10-12mm), there is 15mm.

    Walls with good flatness (3 mm flatness in a rough room) do not need to be leveled with leveling mortar and can be leveled directly using waterproof putty or functional eco-friendly purity.

    If it is uneven or shoveling the wall, it is recommended to use a professional thickened leveling material to repair the mortar and carry out basic treatment on the wall to find a smooth batch of waterproof putty, which not only has a good effect, but also saves putty.

    The walls of a rough house can only be scraped flat after processing a thick screed, and it is possible to scrape and smooth the waterproof putty or other functional ecological purity of the branch. The construction should be carried out according to the construction instructions of the putty, with special attention to full and uniform mixing and batching.

    Speaking of which,Does the wall and floor of the rough house need to be leveled for this?That's it. Hope it helps.

    You can get it for free

  7. Anonymous users2024-02-06

    For the decoration of the wall, people divide it into various steps when decorating. One of the steps is to level the wall, which makes the decoration of the wall more aesthetically pleasing, but many people do not understand this problem. So, people don't know if it's necessary to level the wall.

    Do the walls have to be leveled? What are the steps of the wall?

    Is it necessary to level the wall?

    1. Most wall coatings need to use thick leveling materials for basic leveling. It is part of the roof. Currently, the roofs of the owners I have met rarely need to be leveled, so it has good adhesion, water resistance, and crack resistance.

    The repair cement mortar replaces the previous two materials.

    Do the walls have to be leveled?

    2. Features: The mortar for the interior wall leveling repair code demolition hall is made of flexible dispersion rubber powder, inorganic gel material, various natural minerals and various additives. It has good resistance to adhesion and cracking.

    The material has good adhesion and is effective in preventing undesirable adhesion, cracking and flushing caused by the use of 1 plastering paste and plastering paste.

    Do the walls have to be leveled?

    What are the steps to level a wall?

    1. Treat the wall. Prior to construction, the base layer of the wall must also be treated to ensure that defects such as hollow drums and lifting blocks are repaired or eliminated. And to ensure that the base layer of the wall is cleaned, there are no construction obstacles.

    In addition, it is advisable to wrap the roots of the finished carpenter to wrap the roots of the existing facility in the room or to block the material.

    Do the walls have to be leveled?

    2. Lift the plastered cake. Depending on the type of wall covering and the thickness of the standard line on the finished surface, the thickness of the level is determined. As a rule, the thickness of the surface layer is not less than 20mm, and the horizontal control line rises high on the wall.

    According to the horizontal control line along the wall, the size of the ash cake is generally 5x5 cm, the horizontal and vertical spacing is meters, and the top plane of the gray cake is the height of the wall. If the room is large, you should also clean the ribs. The mortar and mortar material are the same as those on the wall.

    Do the walls have to be leveled?

    3. Brush cement slurry. The function of cement mortar is to make the cement mortar and the wall more closely connected. Cement slurry should be prepared in a ratio of 1:. After preparation, it is applied to the wall with brooms and other tools to form an adhesive layer.

    Do the walls have to be leveled?

    4. Cement mortar paving. After the construction of cement mortar, cement mortar is laid, and the ratio of mud mortar is cement: sand = 1:2, which must be evenly stirred. After the cement mortar is completely paved, a long wooden rod is used to smooth the mortar, and the mortar is combined with the anti-combustion base layer.

    5. The surface is matte treatment. The surface calendering is carried out twice. In the cement mortar, the condensation is slightly resistant to water, the footprints of the person stepped, but when it does not sink, spray the concrete surface, and then illuminate it with a palette iron, from the corner of the eye to a large area, tighten the order to apply it on the home network reminds you that you must press the cement of the cement mortar before the final placement of the mortar for the second time, and smear away the calendering flattening, compact structure, calendering with flat iron.

    And check the flatness of the rule at any time.

    You can get it for free

Related questions
6 answers2024-07-13

This is necessary, because having an ID card does not necessarily have a hukou, and only by holding the hukou can you find out how many houses the family has, which is complementary to the purchase restriction order. >>>More

31 answers2024-07-13

If there is latex paint on the original wall, it can be completely cleaned, and then the tile can be pasted, which is the most correct, and can ensure that the tile is particularly strong and will not fall off easily.

11 answers2024-07-13

Rough house. You can paint directly, and you need to pay attention to it when decorating: Paint immediately on the rough room, not only will the wall be uneven, but also in the long run, their walls will continue to have problems, because this kind of wall is all damp or has some problems, their walls are easy to crack. >>>More

1 answers2024-07-13

We first have to look at the wall of the house,it is best to take a small piece of wood in our hands,knock on the wall,listen to see if there is a hol

10 answers2024-07-13

Although there are many hardcover rooms on the market.

But the rough house. >>>More