How much does it cost to scrape putty per square meter when scraping putty

Now the labor cost of scraping putty on the market is as follows, two times putty does not polish sandpaper, 8 yuan a square. Sandpaper is 10 yuan per square meter, if it contains materials plus 3 4 yuan per square meter. The precautions for scraping putty are mainly to ensure flatness, and then the batch of scraping putty should be pressed with a knife, and try not to leave a knife mark.

I hope my answer can help you.

The purpose of scraping putty is to make the wall smoother and make the paint look better, in fact, there are still many details to pay attention to before scraping putty: 1When decorating the wall, you need to pay attention to the wall foundation before batching putty, such as:

If the old house is renovated, the original base must be removed; If the new house needs to check the thickness of the original foundation of the wall, if there are wrinkles or hollowing after water brushing, the original wall old powder base should be removed, and it is forbidden to treat the wall surface with glue; 2.In addition to the base treatment, it is also necessary to pay attention to the anti-cracking treatment of gypsum board, splint and wall before batch putty. All joints and the depth of the cracks in the wall are required to be gradually embedded with elastic putty to ensure that there are no gaps. For the treatment of yin and yang angles, it is required to be vertical and straight; 3.

The selection of white cement, gypsum powder, etc. requires the use of high-quality powder, which can fill the gaps of the self-made putty, ensure the smoothness of the wall scraping putty, and save latex paint. In addition, white latex or glue should be added to the homemade putty, and the viscosity is appropriate and the glue is uniform.

Scraping putty is also a very important step in decoration, if it is not scraped well, it will affect the overall decoration effect, so this burst must not be sloppy.

If the wall is scraped putty two or three times, plus latex paint, it is generally about 5 yuan square; If you simply shovel the wall skin, scrape the putty without painting, it is generally 3 yuan square; If it is sprayed alone, it is generally 2 yuan square. The ** batch of putty is slightly different according to the wall decoration area, the color and the craftsmanship of the workers.

An indispensable step in the decoration of the living room is the wall decoration, and the wall decoration is inseparable from the wall painting project, whether it is the wall base treatment or the later decoration will involve the wall painting. However, what I want to introduce to you today is the wall scraping putty, how much is the 100 square meters of scraping putty? And what are the advantages and disadvantages of putty of different materials?

Let's introduce it to you!

1. How much is 100 square meters of putty.

1. Generally, because of the different areas, the natural ** is also different, the general painting wall ** in 30-40 yuan square, and some of the network to give the cost of painting the wall is not the same.

2. Remove the original putty on the wall.

First of all, we repaint the wall, and then remove the original putty cost is 4-5 yuan a square meter, the wall laughing and selling interface agent processing labor cost of one square meter, the whitewash wall scraping white brush paint including polishing to 15 yuan a square meter, the wall yin and yang corner straightening using plastic corner strips 6 yuan a meter of labor cost, the wall full of hanging net labor cost of 8 yuan a flat.

3. Semi-packaged repair costs.

Half a package is containing wall auxiliary materials, wall half a package should also be removed wall putty or that price of 4-5 yuan a square meter of rock brother, wall interface agent treatment of 3 yuan a square meter containing Ningyang glue contains labor, painting the wall labor cost of 15 yuan a square meter of wall putty auxiliary materials to about 7 yuan a square meter, wall yin and yang corners to straighten the use of plastic corner strips containing labor costs of 8 yuan a square meter.

4. Direct wall painting costs.

Shovel wall putty about 5 yuan, wall curing 3 yuan, auxiliary materials 8 yuan is ordinary environmental protection treatment, latex paint between 12 yuan, labor costs, batch putty, brush wall paint, grinding and other processes 15 yuan per square meter, but some companies divide the labor cost into grades to about 40 yuan per square meter.

Second, what are the advantages and disadvantages of different putty.

1. Traditional putty.

Cost**: Traditional putty yuan square meters.

Advantages: After the putty is completed, its surface hardness is relatively large.

Disadvantages: There will be a lot of harmful substances such as formaldehyde remaining, which is easy to peel off in layers, and should not be scraped too thick.

2. Water-based putty.

Cost**: 5 yuan square meter for economic type.

Advantages: The surface is generally average, in addition, the mildew resistance is better, and the coarse rise of the harmful substances will be relatively reduced.

Disadvantages: It fails to effectively solve the phenomenon of layered peeling, should not be scraped too thick, and is not suitable for procurement on rainy days.

3. Cooked rubber ash.

Cost**: The cost price of cooked rubber ash is more expensive than others, generally between 10 and 15 square meters.

Advantages: the residue of harmful substances is relatively small, in addition, it has good mildew and moisture resistance, and also has crack resistance, and the workability is also relatively good.

Disadvantages: The surface hardness is slightly inferior after scraping putty, and latex paint is required to achieve the effect.

The cost of scraping putty for home improvement, matters to be paid attention to when scraping putty: the wall will be cleaned before the putty is batched, such as the dust on the wall and some hollow areas of the wall should be solved. Use topcoat to seal the wall, because they can effectively prevent the putty powder from being overdigested and absorbed, which will affect its adhesion.

Special attention should be paid to the position of the second yang angle line, the yin and yang angles have to be continuously extruded with aluminum alloy rods, and the solution to the yin angle line is to use special tools to operate, how to be the yang angle line flat. The first putty construction is thin and thick in the middle of 4mm to 5mm, mainly for the wall to carry out ground leveling solutions, the construction method should be parallel to the wall of the successive construction, the construction process can not be rubbed back and forth, the end must be neat. At the same time, the second putty construction should be carried out only after the first putty powder is dried, and the front side will be polished and polished at the same time.

During the construction, the slope of the tool should be grasped well, and the strength should be averaged, so as to ensure the actual effect of engineering construction, for example, when making up for the holes and gaps of the base layer, the putty knife can be used to make up for it, first press the cutter head with your fingers, and press the putty powder into the gap, and finally clean up the putty powder around it. At the same time, in order to suppress the shrinkage rate of putty powder, it is not necessary to be too thick when brushing, and it can be applied according to the characteristics of different putty powders.

In addition to the base treatment before scraping putty, it is necessary to pay attention to the anti-cracking solution of gypsum board, hair straightening splint and wall. All joints and the deepest cracks on the wall, it is stipulated that the elastic putty is gradually embedded in the rich, to ensure that there is no gap, the use of cowhide gauze paper or white does not need white latex to stick the gaps, large-scale batch embedding engineering construction and leveling regulations; For the solution of the yang angle line, it is stipulated to ensure that it is straight and straight; 3.The selection of cement, putty powder, etc. requires the application of high-quality powder, which can smooth the gaps of self-made putty powder, ensure the gloss of putty scraping on the wall, and save wall paint.

In addition, white glue or super glue is moderately added to the homemade putty powder, and the viscosity is suitable and the super glue is evenly proportioned.

Under normal circumstances, twenty or thirty yuan, the wall should be cleaned, so that the putty can be scraped, and it is necessary to pay attention to safety issues and pay attention to the construction situation.

The cost of scraping putty for home improvement is generally between 10-20 yuan, and different regions are different due to different economic levels; When scraping putty, pay attention to the wall has been sanded and smooth, and at the same time pay attention to the temperature in the room should not be too low, otherwise the putty will be frozen.

In the process of home decoration, scraping putty is generally about 45 per flat. When scraping putty, be sure to level the wall first. Find professional workers to carry out the construction.

Scraping putty is the most commonly used material in the construction industry, it is mainly used for slag search for interior wall decoration, it is also very simple during construction, that is, directly scrape the putty on the wall, and ensure that the wall is flat, generally putty can be scraped up to three times when scraping, and then polished and smoothed with sandpaper. However, this step is usually carried out before the latex paint is applied. So how much does scraping putty cost a square?

I think many friends don't know, so let's talk about the relevant knowledge.

How much is a square meter of putty

Scraping putty is one of the methods of interior wall decoration, and the specific method is to scrape putty on the wall to ensure that the wall surface is flat. Generally, scrape three times, and after drying, polish it with sandpaper. This step is carried out before the latex paint is applied.

Some people brush the wall only putty, or only brush latex paint is not good, the normal process is to brush the putty and then brush the primer and then brush the topcoat, this kind of use for a long time, the wall looks smooth and beautiful. If you want to be cheaper 15, 20 a square meter a lot, rent the house to find this, find a decoration worker to brush it, find Nippon or find Fima renovation to do, there are service points all over the country, the service is the same, Fima renovation is cheaper, **hit a** and asked.

Scraping putty construction process

1. Before using flexible water-resistant putty to paint the wall, how do you need to check the basic condition of the wall? For example, whether the flatness and cleanliness of the wall meet the specifications, as well as whether there are defects such as unevenness and dirt, only when the wall is treated properly, can the construction of putty be carried out.

2. For the kind of wall surface whose flatness is not up to standard, it is necessary to polish the wall surface by removing floating dust and other methods, and wait until the flatness of the wall reaches the requirements before starting to paint the wall. In addition, because the original old base layer is relatively dry, it is necessary to wet the wall before construction so as not to affect the painting effect.

3. Before the construction of the putty, it is also necessary to modulate the flexible putty, and keep stirring back and forth until there is a sticky feeling. Then leave it for a while and then start to paint, so that the painting effect will be better.

4. If you want the wall decoration effect to be better, then you need to have a very skillful putty painting technique, and you need to pay attention to the thickness of the brush to be uniform, not too thick, not too thin, otherwise it will affect the water-resistant putty painting effect.

The above is what I told you about how much putty is a square meter, I think you should have a good idea of how much putty is a square after reading our sharing. Therefore, if you encounter putty scraping in your later life, you will not be deceived when you look for someone. In addition, you must also remember to make sure that the surface of the scraped is smooth when scraping putty, otherwise after scraping putty, the wall will look very ugly when it dries.

We must be cautious in this regard.

You can get it for free