How to clean the white porcelain wash basin so as not to damage the porcelain surface?

Rub with water first. If the sink is dirty, you can use a rag dipped in water, wipe it first, if it is a dirt that is easy to clean, wipe it off immediately, and then observe whether there is other dirt on the sink, spray it on the washstand, bathroom, and kitchen stove dirty place, don't wait long, just take a damp cloth to wipe it, and easily wash off the dirt. If there are stains for a period of time, cut the used toothpaste and wash it with warm water, and add some baking soda to the remaining toothpaste.

Pour into a small watering can, spray at the sink, and then brush with a brush and dish soap.

Wash and wash it clean!

Wipe it once with toothpaste, wipe it with toothpaste to remove small scratches, some small scratches are gone with toothpaste, sometimes I also use toothpaste to wipe the scratches of my car, the effect is not bad, at this time you can use baking soda to dissolve, wet compress with a towel, if the stain is very thick, apply it several times. Apply once or twice, it will fade, and a few more times will achieve a clean effect. First, clean up the items on the water table, rinse the ** surface with clean water, and the fluff on the water table will be washed into the pool.

Spray the scale remover liquid on the countertop, spray a little more in the waterproof place, it is best to take a towel, this will be much cleaner, use some detergent, the effect will be better to clean with neutral detergent; For ceramic sinks, wet them with a rag and add detergent to clean them; For artificial stone sinks, wipe off the dirt with a damp cloth and then dry it with a dry cloth.

Because its basin is inside, water from the countertop can easily flow into the basin.

Inside, after we finish washing, scrub it with a soft rag. This is a simple wash that is too clean, and it will be washed carefully once a few days, that is, with laundry detergent.

Or scrub with dish soap, don't wash with a steel wool ball, because the washbasin is ceramic, if the surface of the steel wool ball is damaged, use a scouring pad to rub it a little bit, easy to decontaminate, very convenient, in addition, these two commonly used items can also be used to clean water cups, tea scale.

It can also be easily removed, convenient and clean, safe and non-toxic.

1. Choose toothpaste, egg white, tea, milk, white vinegar, etc., the most commonly used is toothpaste, toothpaste itself has the effect of bleaching, do not use too much force when cleaning, you can clean it very clean, you can also use expired milk, milk has a good decontamination effect, remember to rinse with water after cleaning the milk.

The best way to clean a white porcelain wash basin is to use toothpaste with a wet wipe or rag to scrub it. Rinse with clean water first, then apply toothpaste to all parts of the wash basin, scrub with a damp towel or sponge, and finally rinse off with water. The effect is very obvious, and it is easier and more effective than using detergent.

When cleaning, you must pay attention to be careful, so that the porcelain surface will not be damaged, and the quality is still relatively strong.

You can put a rag next to the wash basin. Wipe when there are stains, so as to better protect the porcelain surface.

Wipe with a soft cloth, do not wipe with steel wool balls and other such things, and do not use high-concentration cleaning items to clean up dirt, and take protective measures every day.

Washbasins, also known as washbasins, are mostly made of ceramic or glass materials. Ceramic materials, especially white ceramics, are prone to scaling, are neither aesthetically pleasing nor healthy, and are prone to bacterial growth. Home furnishing expert Xiudada has prepared a few tips for cleaning wash basins effectively.

Simple and practical. Check it out! Mix salt and a small amount of turpentine into a paste, apply it to a ceramic basin, wait a quarter of an hour, and then wipe off with a damp sponge.

This method is also suitable for other ceramic sanitary ware. Remove the faucet and clean the dirt thoroughly. Inspect the surface of the washbasin every six months.

If there are scratches and cracks, repair them in time. Do not choose strong acid and alkali detergents, choose mild or special ceramic cleaners; Do not rinse with hot water to avoid cracking the basin; The washbasin must be cleaned with a soft fabric, such as a sponge or cotton cloth.

Daily cleaning should be done well, and after the user uses the ceramic basin every day, the basin surface should be wiped dry and kept dry, which can effectively prevent moisture and mildew. Add a little laundry detergent and wipe clean with a rag. Disinfectant can be used to soak in blisters.

The convenient method is to scrub repeatedly with a cloth dipped in a little toothpaste. For example, the tea stains in Bian Xiao's cup are washed off with toothpaste, which is very clean! Bian Xiao thinks it's more convenient to clean with toothpaste.

There is a relatively new method: in order to eliminate utensils such as washbasins with smooth surfaces, we can remove some of the dirt from containers with uneven surfaces. You can drink leftover tea bags, fried things, or inedible waste oil.

Dry the tea bag first, then soak it in used oil, gently wipe off the dirt, and the dirt will fall off.

We just need to put some water in the basin, then add some baking soda, soak for 5 minutes, and gently wipe it with our hands, and it will be clean; It can also be washed with hydrochloric acid. It can be wiped with hydrochloric acid. A special porcelain cleaning essence and brandy are used to remove oil from the lenses.

The lenses are covered with dirt and oil and can be wiped with brandy or kerosene for easy cleaning. When we find that the stain is serious, we need to fill some bleach in a glass bottle, pour it and soak it for about 20 minutes, then wash it with a sponge or towel, and then wash it with clean water. After slicing the lemon, we can gently wash the surface of the basin and rinse it with water after 1 minute, so that the basin can be brightened.

In order to keep "in order to keep it lasting and bright as new". In terms of "column basin maintenance", the glass column basin should not be poured with boiling water to prevent cracking. It is recommended to clean with cotton cloth, neutral detergent, glass cleaning water.

We should remember not to wipe the surface with scouring pads or abrasive powder to keep the surface smooth.

First, turn the faucet as wide as possible and carefully rinse the basin with water. After soaking the rag, wipe the dirt off the basin. Try applying some laundry detergent or toothpaste to dirt that is difficult to remove.

If the wash basin is not very expensive, you can try wiping it with steel balls. The results are absolutely immediate, but can cause scratches on the wash basin. After the dirt is wiped off, rinse it again with clean water to rinse off the dirt traces left by the wipe, and then wipe it with a dry towel to prevent dust from appearing.

Wash with a towel. Because the towel is soft and does not scratch the porcelain surface, it can be cleaned with a towel.

Laundry detergent just wipe with a rag. If that doesn't work, try rubbing it with toothpaste. The tea stains on my teacups are washed off with toothpaste, so they are very clean. I believe it is also useful for washbasins.

Clean with a soft-bristled brush. Because the hardness of the soft-bristled brush will not be so high, it is not easy to hurt the basin.

Ceramic basins have brought us a lot of convenience in home life, but what kind of ceramic basin products are available on the market, how can we buy ceramic basins that suit us? And how to clean and maintain ceramic basins in daily life? Now let's take a look at the quality identification and cleaning steps of ceramic basins.

Quality identification of ceramic basins:

1. The lower the water absorption, the better the product.

The water absorption index refers to the fact that the ceramic product has a certain adsorption and penetration capacity to water, and the lower the water absorption, the better. If water is sucked into the ceramic, the ceramic will produce a certain expansion, which is easy to make the glaze on the surface of the ceramic crack due to swelling. Especially for toilets, products with high water absorption rate are easy to inhale the dirt and odor in the water into the ceramic, and after a long period of use, it will produce odors that cannot be removed.

The national standard stipulates that sanitary ceramics with a water absorption rate of less than 3% are high-grade ceramics, and the water absorption rate of medium and high-end brands such as Koma, Kohler, and Guisto is lower.

2. Look at the finish of the ceramic basin.

The product with high finish, pure color, not easy to hang dirt and dirt, easy to clean, good self-cleaning. When judging, you can choose to carefully observe the reflection of the surface of the product from the side under strong light, and it is better to have no fine sand holes and pittings on the surface, or very few sand holes and pits; You can also gently stroke the surface with your hands, and it feels very smooth and delicate. 3. Use the comparison method to see the brightness of the ceramic basin.

The products with high brightness index use high-quality glaze materials and very good glazing process, which has good reflectivity and uniformity to light, so that the visual effect is good and the product is of high grade. When choosing, you can compare and observe the products of different brands together, and it is easy to judge the high-quality products.

Cleaning steps for ceramic basins:

1. First turn on the faucet, try to open it as louder as possible, and flush the basin with clean water first;

2. Then we find a strip of cloth or a towel that we don't use, soak the towel, and wipe the dirty area on the basin;

3. If there is dirt that cannot be removed, we can add some laundry detergent and then wipe it with a damp cloth;

4. When cleaning, we can also use toothpaste, apply the toothpaste to the dirty area, and then wipe it with a damp cloth after a while;

5. When cleaning, we can also use white vinegar, which can decompose a part of the dirt, and the decontamination effect is also good;

6. If your ceramic basin is not precious, you can use a wire tennis ball to wipe it, this effect is good, but it is easy for the basin to be wiped into scratches;

7. Of course, you can also go to the supermarket to buy a bag of decontamination powder to wipe the ceramic basin, the effect is good, and it also has a fragrance;

8. After wiping it clean with the above method, rinse it with water first, rinse the materials used, and then wipe it clean with a dry towel, so that it is not easy to have dust.

Ceramic basin has the advantages of high temperature resistance, temperature resistance, easy cleaning, hard surface and wear-resistant, and aging resistance, and is the mainstream product in the current basin of various materials, so it has been loved by the majority of owners. I hope the above introduction to the quality identification and cleaning steps of ceramic basins will be helpful to you.

White porcelain washbasins are often used in many families, and it is very convenient to wash your hands, face or water. When using the washbasin, it is inevitable that there will be stains left, and if you don't rinse it completely this time, it will accumulate with the stains behind it after a long time, so the washbasin will sometimes turn yellow after a long time. But as long as we clean it, we can still restore the original smooth and bright white.

1. Spray a certain amount of special cleaning agent on the basin, and then wipe off the stain with a rag.

2. Spray some vinegar water on the basin. Vinegar water is a solution of edible vinegar and water that dissolves stains on the washbasin and then wipes it with a clean cloth.

3. Use the remaining tea bags, fill them with waste oil from the frying, dry them, and slowly wipe the stains on the basin, the effect is very good.

1. It is easy to remove dirt after soaking in white vinegar or citric acid.

2. Take a certain amount of toothpaste and apply it to the dirt, then gently scrub it with a rag, and finally rinse it with water.

3. Prepare hot water, chop the potatoes and put them in a cup, pour the prepared hot water into the cup and soak for 10 minutes to remove the tea stains.

4. After slicing the lemon, gently scrub the surface of the basin. After 1 minute, rinse the basin with water. The basin will brighten.

1. Whether the glaze can be lubricated, whether it is easy to scale, and whether it is easy to clean after scaling. The high-quality glazed "honeycomb" is extremely small, lubricated and dense, and not easy to get dirty. Generally, it is not necessary to use strong decontamination products frequently, and it is sufficient to wipe them with water and a rag.

2. Water absorption is an important indicator of ceramic basin. Generally speaking, ceramic products have a certain ability to absorb and penetrate water, and the lower the water absorption, the better. When water is sucked into the ceramic, the ceramic will shrink to a certain extent, which will easily cause the glaze on the surface of the ceramic to crack due to expansion, and it is easy to suck the dirt and odor in the water into the ceramic, which will produce an odor that cannot be removed after a long time.

After using it again, wash it in time, and after washing, you must rinse it with water several times so that it will not show signs of yellowing.

You can buy glass glue online, which also has a protective effect on your hands, and the gel can greatly reduce the yellowing and remove mold.

I want to remove. The yellowing marks on the stone washbasin can be used with toothpaste, which is a cleaning artifact, and the cleaning effect on the porcelain surface is particularly good. After applying toothpaste, the stain can be cleaned with a light brush.

If you want to remove the yellowing marks of the porcelain surface, you can use toothpaste to clean it, toothpaste has a very good cleaning effect, just apply the toothpaste to the marks and gently wipe it with a sponge.

The porcelain washbasin will be yellow for a long time, how to clean it?

How do you clean a ceramic washbasin? How to clean the ceramic column washbasin? In fact, there are many ways to clean ceramic washbasins and ceramic column washbasins in life.

How do you clean a ceramic washbasin?

1.Add a little laundry detergent and wipe with a rag. 2.

A disinfectant solution can be mixed with a blister. 3.A more convenient way to do this is to dip a cloth in a little toothpaste and scrub it repeatedly.

For example, the tea dirt in the cup is washed off with toothpaste, which is very clean! 4.It's easier to clean with toothpaste.

5.There is a relatively new method: we remove some dirt from the uneven surface of the container in order to eliminate the smooth surface of the washbasin and other utensils.

You can use leftover tea bags, fried things, or waste oil that you don't eat, first dry the tea bags, then soak them in the used oil, and gently wipe them on the dirt, and the dirt will come off. 6.We just need to put some water in the basin, then add some baking soda, soak for 5 minutes, and then gently wipe it with our hands, and it will be clean; It can also be washed with hydrochloric acid.

7.You can use hydrochloric acid to rub it. 8.

Using a special porcelain polish, brandy to remove lens oil stains The spectacle lenses are covered with dirt and oil, and you can use a fine cloth dipped in some brandy or kerosene to wipe it, which is convenient and clean.

How to clean the ceramic column washbasin?

When we find that the stain is more serious, we need to fill some bleach in a glass bottle, pour it into the wash and soak for about 20 minutes, then wash it with a sponge or towel, and then wash it with clean water to wipe it clean. 2.We can also use lemon to slice, gently scrub the surface of the basin, and then rinse it with water after 1 minute, and the basin will become shiny.

3.In order to keep "so that it can stay bright and new for a long time". In terms of "maintenance of the column basin", the glass column basin should not be poured with boiling water to prevent it from cracking.

It is recommended to use cotton rags, neutral detergents, glass cleaning water, etc. for cleaning. 4.We should remember not to wipe the surface with scouring pads or abrasive powder, the purpose is to keep the surface smooth.