Baby woolen shoes method, how to weave baby woolen shoes

For shoes that knit wool for babies, you can knit the soles first, then know the uppers, and then sew the uppers and soles together, and a pair of shoes will be cured.

The knitting method of baby woolen shoes requires the preparation of wool, and then the preparation of the application and the outline strokes.

The weaving of baby woolen shoes is as follows:

Preparation materials: wool and rod needles.

1. First of all, knitting shoes needs to be woven from 3 parts. the first part of the sole; The second part is the upper, and the third part is the tube. Prepare the rod needle and rod needle thread. Start knitting the soles. Start with 4 needles for demonstration.

2. Then, there are 6 coils on the rod needle.

3. Then, add a needle to the head and tail again, and then return without adding or subtracting the next needle. At this point, there are 8 coils on the rod pin. Then knit the needle on both sides without adding or subtracting, and weave it to the required length.

Then start to subtract the needle, as with the additional needle, after the first needle, before the last needle, 2 needles and one needle.

4. Subsequently, there are 4 more stitches on the rod needle, and these 4 stitches are used as the toe cap. The sole is knitted.

5. After that, start knitting the second part of the upper. Use a stick needle to pick out one stitch from each of the other 3 sides and start knitting the needle. Every time you knit to the left and right sides of the toe cap, you have to reduce the stitch, that is, you have to have 2 stitches and one stitch.

6. Repeat the weaving to the height required by the upper. So that the upper is knitted. The next step is to weave the shoe tubes.

7. Then, knitting the shoe tube, to change the knitting stitch, start to knit a needle, a needle. Weave to the desired length without adding or subtracting. Then close the needle. So that the shoe tube is knitted.

8. Finally, tidy up and turn the shoe tube down. In this way, the knitting of the woolen shoes is complete.

Tools Ingredients: A pair of sweater needles, a ball of pink wool, a ball of white wool.

Method Steps: 1. First of all, I started with pink wool, I started 30 needles, both front and back, a total of 70 rows.

2. Then 13 stitches were collected, and the remaining 17 stitches were played in four rows of positive needles, and then replaced with white threads to play four rows of reverse needles, of course, you can also use the same kind of thread. A total of 44 rows were played, and at the end it must be a peachy line, otherwise the sides are asymmetrical.

3. Then close the two sides, close the needle while closing, pay attention to the back when closing, and turn it over after closing, just like on the figure.

5. Use white wool to make a small ball of yarn.

6. Tie the finished woolen ball ball to the top of the shoe, and one shoe is ready.

7. According to the practice of the first small shoe, I am making one, so that a pair of baby woolen shoes is ready.

The weaving of newborn woolen shoes is as follows:

There are many housewives who are bored at home and will often knit woolen shoes for children, and the first time they knit woolen shoes may often make mistakes, but after being proficient and having a foundation, it will be very fast to weave, and as long as you have patience and good time, you can also learn slowly, so how to do children's woolen shoes? Skillful mothers can learn the methods and steps of knitting a newborn woolen shoes.

1. The needle is the first step, first 14 needles lock the needle, and then from the second needle to the 5 needles on the hook 1 needle short needle, it should be noted that the broken needle is to hook to the other end.

2. In the second circle, add 1 short needle to the first 5 needles of the first circle, and then pull up the second circle and hook 1 needle.

3. Followed by the third circle of hooks, at this time it is necessary to hook 4 short needles, and then hook 2 medium and long needles and 5 long needles. It is important to note here that from the sixth stitch onwards, you need to add one more stitch for each stitch, continue to add three times, and then continue to add stitches after two stitches.

4. When the hook is in the fourth circle, there will be 1 lock needle and 12 short needles, and then the needle will be added from the 13th needle, and every 1 needle will need to be added to another 1 needle, and a total of 6 needles will be added here.

5. When hooking the fifth circle, it is a hook to lock the needle and then hook a short needle, and then continue to hook the second circle of short needles until the hook reaches the third circle of the sole to be crocheted.

6. Next, you need to continue to hook the upper, hook a spine needle lock needle and a short needle in the first circle, and then hook 2 medium and long needles and 4 long needles. It should also be noted here that from the fifth needle, 2 needles will be combined and 1 needle will be combined, and this step can be repeated according to the number of needles.

7. Finally, the shoes can be sewn after the hook is completed.

Newborn woolen shoes letter mu weaving:

Tools: wool, knitting needles.

1. Prepare the yarn and knitting needle. Baby shoes we take 6 stitches.

2. Then start knitting the needle. Add a stitch at the end of each row. The method of adding stitches is to pick up a knitted needle on the braid of the last stitch. This adds a shot.

3. Repeat until 12 stitches.

4. Then do not add or subtract the length of the weave to the foot, and start to reduce the needle. Knit to the last 2 stitches of each row and keep stitching. Reduced to only 6 stitches. These 6 stitches are kept for the toe cap.

5. Then pick up the other 3 sides and start to knit a circle of needles. Then make a mark on the 2 needles between the wheel heads of the 6 needles in the toe cap.

6. Each row is woven to the left and right sides of the 2 stitches to mark the needle and begins to reduce the needle. Tung Mori weaves to the height that the upper fits.

7. Next, change the stitching method to weave a needle on the needle and a needle on the needle. Weave to the desired length.

8. Then collect the needle, break the thread and hide the thread. So that the baby shoes are knitted.

1. Prepare wool and rod needles, start 20 needles, and knit woolen shoes for 1 to 2-year-old babies.

2. Then the front and back sides begin to knit the needle, when weaving, the right hand belt line should be balanced, so that the weaving is very smooth.

3. After weaving to a rectangle, put away the 10 stitches on the left.

4. Continue to weave 4 rows of upper needles on the right, and then knit 4 rows of lower needles.

5. Fold the 4 rows of upper needles and the 4 rows of lower pairs of knitted needles and sew them.

6. Sew the right side of the shoe, this part is the sole.

7. Then stand up with the soles facing down, and thread the upper and lower parts of the 4 rows of the 4 rows that have just been knitted and tighten them. So that the shape of the shoe comes out.

8. Fold the long part of the upper down, so that the baby's shoes are knitted.

9. Then sew a flower or other decoration on the back of the shoe, and then weave another one according to the same method.