What should I pay attention to when installing and modifying the wall, and how to change it?

When changing the wall structure, pay attention to whether the wall is a brick wall

1. If it is a brick wall, it can be knocked off directly, and the wall is not a hollow brick, which is very easy to knock off;

2. If it is a cast-in-place concrete wall, it will be very hard, and you will know that there are a lot of steel bars in it, which is the load-bearing part of the building, which cannot be destroyed, and it can be seen from the house plan whether it is a load-bearing wall;

3. The decoration deposit will be paid when decorating, which is to ensure that the owner will not indiscriminately damage the structure of the wall during the decoration.

load-bearing walls.

When the wall is demolished, it must be noted that the wall is not any wall can be changed, some walls are load-bearing walls, shear walls can not be beaten, and this kind of wall is also difficult to move, very laborious, generally also knock off a little skin to modify the light line!

It is recommended that you can try to remove the partition wall in the home, and use gypsum board to make the partition wall, such as the partition wall between the bedroom and the corridor, if the bedroom is relatively small, you can completely remove the partition wall in the bedroom, and make a layer of gypsum board outside after the wardrobe is built, which can save a lot of space!

Some walls are made by developers in order to give away the area, and there is a part of the wall in the middle of a bedroom in this kind of house, which can be knocked off and changed into a bedroom, and there are also some balconies that are relatively wide, which can also be knocked out and let the balcony be connected to the living room!

In the process of decoration, you need to renovate the wall according to your overall design, but you must not touch the load-bearing wall, otherwise it will bring unbearable consequences.

When carrying out wall transformation, the non-load-bearing wall must not be dismantled, and the problem of transforming the circuit pipeline must be considered.

It is necessary to carry out transformation according to the overall planning, and we must pay attention to the problem of size and the overall pattern.

The decoration style and wall are the two most important parts of the decoration of the room, these two parts can directly affect the atmosphere and style of the whole room. If you've been living there for a while, you may find that your home décor is a bit drab and dull in appearance. If you want to change it, it is a good way to redecorate the walls.

Here are some ways to change the style and wall of your décor.

1.Change the wallpaper: If your walls are wallpaper, you may want to consider changing the wallpaper to a new style. You can choose a décor or pattern that matches the existing colors to make the room more vibrant and vibrant.

2.Painting: If your walls are painted with paint and you don't want to spend a lot of money on re-wallpapering, the easiest way to do this is to paint it. Picking a new color and repainting the walls can quickly change the mood of the entire room.

3.Use tiles: If you're looking for a more durable material, you can use tiles to update your walls. Tiles can be selected in different styles and colors, making it easy to add beauty to a room.

4.Installation of hanging decorations: not only need to pay attention to wall decoration, but also pay attention to more decorative hanging decorations. You can choose some creative and personal decorations to liven up a monotonous room.

5.Change the lighting: If your lighting is too dim or too soft, replacing it with brighter and more vibrant lighting will enhance the atmosphere that the room creates.

In short, changing the décor style and walls is to redefine your room, and you can make it look new with a little thought.

1. The roof beam cannot be removed: although the roof beam sometimes affects the beauty of the house, it cannot be removed. Since the beams support the upper floor, the upper floor may be at risk of falling if the upper layer is removed or rebuilt.

2. Don't remove the walls connected to the balcony: Don't remove some of the walls connected to the balcony in order to improve the lighting of the room, which is incorrect. Because this part of the wall is generally a load-bearing wall, it is very dangerous to simply drill holes and open windows.

3. The load-bearing wall must not be demolished: Most people know that the load-bearing wall cannot be demolished, and they will not touch it when the house is rebuilt. However, few people know what kind of wall is load-bearing.

On the floor plan, the load-bearing walls will be significantly thicker than the others. In fact, the exterior walls are all load-bearing walls, with a thickness of 24 cm.

4. Do not ignore the repair work: if the original wall is demolished and the wall needs to be built with red bricks, it is necessary to set up tension reinforcement on the new wall. This is an effective way to ensure the stability and seismic resistance of the wall.

5. Report to the property office before demolishing the wall: After the construction is completed, the property company usually receives the drawings left by the original design unit, which indicate the thickness and material of the load-bearing wall and other walls. Based on the drawings, the utility company can determine which walls can be removed.

Therefore, when the owner demolishes the wall, he needs to hand over the new construction drawings to the property management company, and the construction can only be carried out after approval.

How to do wall renovation.

1. Disclosure. Before the wall demolition work begins, the construction personnel should understand the demolition area and wall structure under the leadership of the supervision or decoration company, so as to ensure that the load-bearing wall is not damaged during the demolition process, so as to avoid problems in the house structure.

2. Positioning. Before dismantling the machine and erecting it, the construction personnel need to divide the excision area with elastic lines and determine the load-bearing structure in the wall. Before the hole punch is opened, the wall renovator needs to calculate the number of holes and the approximate size of the holes.

3. Waterproof. In order to prevent the house from being filled with water, it is also necessary to lay yellow sand around the demolished wall, so as to effectively suppress the occurrence of dirty water.

4. Stationary machine.

The wall cutter cuts from top to bottom along the track, and the punch must be firmly fixed to the wall to avoid any safety hazards. The wall renovator will make holes in the wall, drive expansion pipes, and fix the rails and machines to them, so that the wall renovation project can be carried out safely.

5. Excision and punching.

When the wall cutter cuts, it first cuts horizontally, then longitudinally, and finally cuts off the bottom, and cuts while cooling the cutter head until the wall is completely cut off. The punching machine punches the transverse hole first, then the longitudinal hole, and then uses a sledgehammer to remove the middle wall after the punching, which can effectively control the damage in the wall transformation.

6. Wrap up. For the part of the wall grounding in the wall renovation, the cutting machine and the punching machine cannot reach it, and can only be removed by electric hammer or other tools. The angle of the tool used for the finishing touch should not be perpendicular to the ground to avoid piercing the floor.

In the decoration process, the treatment of the wall is a very critical step, and the following are several issues that need to be paid attention to in the wall treatment:

Base treatment: Before painting or pasting wallpaper, the wall needs to be treated with a base layer. This includes operations such as cleaning, filling cracks, and applying plaster. If the wall surface is uneven or damaged, it needs to be sanded with a sander to ensure that the wall surface is smooth.

Paint selection: When choosing wall coatings, you need to consider factors such as material quality, environmental performance, and decorative effects. It is recommended to choose high-quality products to ensure long-term stable aesthetic and environmental results.

Prevention of cracking: When applying wall paint, it is necessary to pay attention to prevent cracking of the wall. In general, the walls should be painted in at least 2-3 layers to achieve the desired effect, and the interval between each layer needs to be dry enough.

At the same time, before construction, you can use professional sealing glue or paste anti-crack net to carry Tong Peixing prevention.

Precautions for pasting wallpaper: If you choose to paste wallpaper, you need to pay attention to the pattern, color matching and size matching of the wallpaper to ensure the fit. When pasting wallpaper, you need to treat the wall first to avoid problems such as bubbles or wallpaper falling off.

Pay attention to the waterproofing of the bathroom wall: The wall of the bathroom needs to be waterproofed to avoid moisture penetrating into the brick joints and causing cracking and dampness. It can be treated with waterproof paint or waterproof tape.

In short, in the decoration process, the wall treatment needs to pay attention to the base treatment, paint selection, cracking prevention, wallpaper precautions and bathroom wall waterproofing. If you are not sure how to treat your walls, it is advisable to consult a professional renovation company or technician.

After the renovation, if you want to change the color of the Chafeng wall, you can take the following methods:

1.Paint. Painting is a relatively easy way to change the color of a wall.

Paint is a durable coating that is able to create a bright, fresh atmosphere in a house. When choosing a colour, it is advisable to use light colours, as they will make the room feel more open. Applying the wall paint with a paint brush parallel to the wall will make the coating more even, ensuring a smoother finish.

2.Paste wallpaper.

Wallpaper is a reinforcing fabric that is often used to create a fresh atmosphere on the walls of a house and offers a wide range of design options. Wallpapers** are a bit more expensive than paint, but they can offer a choice of different colors and patterns to add more beauty to the home. Before pasting the wallpaper, make sure that the wall is dry and flat so as not to affect the effect of the sticker.

3.Use tiles or stone.

Using tiles or stone is another way to change the color of your walls. This method is suitable for areas that require durable walls and high-risk areas, such as kitchens or bathrooms. They provide a longer-lasting, more convenient method of cleaning, and can add more design options to the home.

4.Demolition and reconstruction.

If you're not satisfied with the renovation or want to completely change the layout of your house, you can consider demolishing and rebuilding. Although the process of Kimin is relatively long, it can provide you with more design options and make the home more suitable for your life needs.

In short, there are many ways to change the color of the wall, but you need to consider the needs and functions of the house, and choose the right method to fundamentally improve the style and value of your home.

Load-bearing wall, meaning to support the weight of the upper floor of the wall, usually in the engineering construction drawings will be presented as a black wall shape, if the random demolition and modification, the consequences will be very serious, of course, if it really has to be demolished, you need to be clear about the relevant regulations of the Ministry of Construction, change the load-bearing wall of the house need to find the original design and construction unit to give the same specific modification, reinforcement plan, in addition, it should be noted that it is not possible to open the door and open the window at will in the load-bearing wall at will. This not only directly weakens the load-bearing capacity of the wall, but also seriously damages the integrity and seismic performance of the house.

The light wall can not be changed at will, in the house structure, the light wall is not said to be demolished, it should be noted that the light wall under the beam can not be demolished, and it also plays a role in bearing part of the weight inside the house structure, and it cannot be dismantled at will, of course, if it is completely used as a partition wall, the light wall can be removed, the value of this wall has no other role in the structure except for separating the space, and it can be demolished and modified at will, and it will not affect the structure of the house.

Balcony low wall, in terms of home decoration, most house structures will have balconies, in the balcony here, there are also some walls that can not be demolished at will, such as the low wall next to the balcony, in the house structure, there will be a door or a window on the wall between the room and the balcony, these doors and windows can be demolished, but the wall can not be demolished, because the wall is a counterweight wall in the house structure, if it is removed and changed at will, then it will lead to a decrease in the bearing capacity of the balcony, causing the balcony to fall, so this point should also be noted.

In the structure of the house, the beam body can not be demolished, the beam is used to bear the weight of the superstructure, if it is demolished, it will cause the upper floor slab to fall down, it will be quite dangerous, and it should be noted that if you hollow out the wall for the wall modeling, the steel bar in the wall will be removed, then it will affect the bearing capacity of the wall and the floor, and it is also quite dangerous.

It depends on the structure of the house, there are several kinds of house structures, 1, the old brick and concrete structure house, this kind of house floor is prefabricated slabs on the top of the wall, the walls need to bear the weight of the floor slab, and it is not allowed to be demolished. 2. The shear wall structure load-bearing house, which is a combination of shear wall and infill wall, in which the shear wall can not be removed, and the beam on the infill wall can be removed arbitrarily. 3. Structural column load-bearing building, except for the load-bearing column, other walls in the house can be dismantled at will.

4. Pillar structure building, there is no wall in this kind of house, only water pipes and central pillars. Of course, the exterior walls of these buildings cannot be demolished.

Load-bearing walls and exterior walls cannot be changed at will.