When is it good to prune a triangular plum? When is the best time to prune the triangular plum

The maintenance of the triangular plum should have a "queen heart" to be ruthless, "ruthless drying, ruthless cutting". Triangle plum has the more sun, the healthier it is. The more you sunshine, the more you say. There is a saying that the more you prune, the more you prune, the more flowers you have.

Therefore, the maintenance of the triangular plum should be cut frequently. When cuttings of triangular plums, try to leave 3 to 5 bud points that are not parallel and unparallel.

After the cuttings are lived, when the branches are lignified, you can do the first pruning, and keep the three to five branches close to the bottom, not parallel, not rotated, and not crossed, which is generally called "one pole and three branches".

The main stem first leaves 3 to 5 bud points to shrink the branches, and then leaves the bud points that stretch out from the center of the main trunk.

After stocking for a period of time, the buds are first wiped, and the branches that grow later are cut off to keep the original stored branches. The secondary branches are trade-offs, and the general secondary pruning is called, "three branches and nine branches". After pruning, continue to stocking the shoots.

Later, after careful pruning, the crown width is pruned into an umbrella shape, or a round spherical shape, and a plump crown can be obtained.

"One pole and three branches" and "three branches and nine branches" are the simplest triangular plum canopy shapes. After retention and stocking, adventitious buds are erased and pruned. The crown formed in the later stage of the triangular plum is full. The center of the crown width is transparent and there is no crossing.

It allows the entire crown to absorb light and does not impede ventilation.

Strong pruning is generally carried out at the end of autumn, immediately into the winter Triangle plum will enter a dormant state, it basically stops growing, at this time in order to reduce the consumption of nutrients, we cut off its thick branches, small branches to cut off, to a strong pruning, so that nutrients reduce consumption, through the winter peacefully, and so on in the spring it will continue to grow, has been flowering, it is necessary to adhere to the three principles of short and weak density to prune it.

Summary: After the cuttings are lived, the shoots should be stocked in strict accordance with the "one pole and three branches". The second pruning is stored according to the "three branches and nine branches", and the branches of the triangular plum can be shaped in the shortest time.

At the same time, it can also make the whole crown fuller in the most efficient way. And there will be no parallel, rotational branches.

Generally, it is pruned in late spring and early summer, because it has already bloomed at this time, and it blooms very well, you need to prune the branches and leaves to prevent its flowers from blooming for a short time, and then water it regularly.

Generally, it is best to prune the triangular plum in the spring, that is, in March and April.

Spring. Because the temperature at this time is just right, it will take a certain amount of time to recuperate after pruning, and this time can provide it with a particularly good environment, which is conducive to its recovery.

When cultivating the triangular plum, in fact, it can be pruned all year round, generally pruning many times, but not excessively.

When pruning the triangular plum is generally after the full flowering period, when the full flowering period is over, pruning can cut off the remaining flowers. In this way, the consumption of nutrients can be reduced, and nutrients can be accumulated for the next flowering of the Triangle Plum.

Pruning during the growing season is generally to shape the triangular plum to see which branches are not suitable for retention, and then cut them off, which can also promote lateral growth and increase the number of flowering branches.

During daily pruning, you need to prune the branches that are not growing well to keep the plant in the best condition. After flowering, in addition to cutting off the residual flowers, there are also some branches that affect growth and ornamentation, and the remaining branches do not need to be pruned, you can modify them a little, do not re-prune.

When cultivating triangular plums, how many times a year do you need to prune the branches? Generally, the formed Triangle Plum plant needs to be pruned about 1-3 times a year, but not too much, which will affect the growth of the Triangle Plum, the number of flowering times and the flowering time. After all, the triangle plum blooms many times and has a relatively long flowering period, and if the pruning is bad, it will outweigh the losses.

The triangular plum can be described as the main force of summer flowering. There are many varieties of triangular plum, with different flower colors, and it is deeply loved by everyone. In order for the triangle plum to bloom, in addition to adequate light and watering and fertilization, pruning is also particularly important.

In order to maintain a good plant shape and increase the amount of flowering, it should be pruned frequently, just like jasmine. So when is it good to prune?

Clause. 1. Prune before flowering.

The flowering period of the triangular plum is generally around April to November. If after April, the triangular plum has been growing branches, only long branches without buds, it is necessary to prune and top the short branches in time. Each shoot retains two or three pairs of leaves, that is, two or three pairs of bud points.

This can serve the purpose of stubbing, so that the stub branch can age quickly, so that it can grow small side branches. Triangle plum blossoms on new branches, and the more side branches, the more flowers bloom when it comes.

Of course, when the small branch grows to two or three pairs of leaves, it is necessary to control the water and enhance the light to promote it to meristem flower buds, which can achieve the purpose of more flowers.

Clause. 2. Prune after flowering.

After flowering, the branches should be pruned in time to promote the side branches, and the branches that are too dense with long branches should be pruned together to reduce nutrient consumption. After pruning, give it a fertilizer with nitrogen, phosphorus and potassium to let it spit out new side branches. The side branches grow to two or three pairs of leaves, and then bloom again by controlling water and increasing light.

Clause. Third, strong pruning after autumn.

Strong pruning is usually around November, when the temperature drops and it is about to enter the dormant period of winter, when it stops growing before the foundation. In order to reduce nutrient consumption, it can be cut off from thick branches and cut off small branches to withstand a strong pruning. The main purpose is to save nutrients and survive the winter.

In winter, it is placed in a place where the temperature is about 10 degrees, and when the temperature rises in spring, new side branches can be grown, so there is no need to worry about this.

The growth and flowering of the triangular plum is to rely on strong light, enhanced fertilization, and frequent pruning and shaping to promote flowering. In this way, the triangle plum can grow into a flower tree for decades.

The triangular plum is best pruned in summer and autumn each year.

Because summer and autumn are the post-flowering and growth periods of the plants, pruning at this time is conducive to reducing nutrient consumption and promoting the concentrated supply of nutrients to the triangular plum, so as to prepare the plants for vigorous growth and flowering. When the flowering period of Triangle plum is over, it is necessary to prune the residual flowers, diseased and insect branches, and long branches in time to reduce nutrient consumption and promote the rapid recovery of plant growth.

After the pruning of the triangular plum is completed, it is necessary to spray carbendazim solution on the wound in time to avoid the wound being infected with germs, which is not conducive to the healing of the wound, and it is best to choose a sunny weather and suitable temperature when pruning to prevent the wound from being wet and rotting, affecting the growth of the plant.

Reasons for pruning the triangle plum

1. The soil and nutrients of bonsai are very limited, and the growth space is also limited, so it must be retracted, so that bonsai plants can maintain a certain size of plant type, so as to avoid nutrients that cannot keep up, poor plant growth, and natural flowering is not beautiful.

2. People want to make bonsai not only bloom more, but also want to bloom well-looking, pruning is to achieve the organic combination of flowers and scenery, so that the potted flowers of the triangle plum are a bit bonsai, and you can usually appreciate the plant type.

3. Prune off weak branches, dead branches and some useless branches, cut out the layers, so that the branches are light, so that the healthy and thick branches you need can get more nutrients, grow stronger, accumulate more nutrients, and bloom more beautifully.

1. Spring pruning. Spring is the time of growth and germination, when pruning is just right, the plant can recover quickly, and the yellowing and withered branches and leaves are cut off, which promotes the growth of side branches, and the whole plant shape is fuller and more lush.

2. Growth period. Its growth rate is relatively fast, especially in the growth period, a large number of branches and leaves grow outward, which may cause the whole plant to be messy, and the extension is not orderly, at this time, the branches that cannot bloom should be cut off to promote the growth of side branches.

3. After flowering. Pruning is the most important thing after the end of the flowering period and is the most helpful for growth, so you can remove the broken flowers from the flower branches and do not continue to leave them on them. There will also be some flowers left sporadically, because the ornamental is not good, so they can be cut directly.

4. Usual pruning: General pruning is for its branches.

5. About the pruning of the shape: This can be done often, because sometimes the growth rate is too fast will affect its ornamentality.

1.Spring pruning. Spring is the period of growth and germination, when the triangular plum is pruned properly, the plant can quickly recover, the yellow, withered branches and leaves are cut off, promote the growth of side branches, and the whole plant shape is more plump and lush.

Observe the whole plant, remove the branches that are not growing well, and cut off the weak branches and short branches as well.

2.Growth period. The growth rate of the triangular plum is relatively fast, especially in the growth period, a large number of branches and leaves grow outward, which may cause the whole plant to be messy, and the extension is not in order, at this time, the branches that can not bloom should be cut off, promote the growth of side branches, and also ensure the number of flowers after that, and also improve the light conditions, so that the number of flowers increases, and the flowers open better.

3.After flowering. Pruning is the most important thing after the end of the flowering period of the triangular plum, and it is the most helpful for growth, so you can remove the broken flowers on the flower branches first, and do not continue to stay on them.

There will also be some flowers left sporadically, because the ornamental is not good, so they can be cut directly, so as to reduce the consumption of nutrients, and there will be enough nutrients for the next flowering. The flower branches should be properly truncated, some parts should be pruned, and other branches should also be pruned according to the situation.

4.Usual pruning: General pruning is for its branches.

Branches that are too dense, pests and diseases, and branches that are too long are all targets for pruning. Diseased branches must not be left behind, but dense branches can be cut off only a part and a part left. After pruning, it is good for both growth and flowering.

5.Regarding the trimming of the shape: this can be done often, because sometimes it grows too fast and can affect its ornamentality. This can be mainly based on personal aesthetics, giving it a good-looking shape.

<>The best time to prune the triangle plumTriangle plum can be pruned all year round, and can also be pruned many times, but it is not good to prune indiscriminately, there must be a degree, and it is best to prune after the full flowering period. After the flowering period of the triangular plum, you can cut off all the remaining flowers, so as to reduce the nutrient loss of the triangular plum tree, let the branches and leaves with more nutrients grow, and accumulate strength for the next blooming of the triangular plum.

Triangle plum grows rapidly, the growth period should pay attention to plastic pruning, generally after germination, can determine which branches are weak and which are strong, which are dry, after pruning can promote the growth of side branches, more flower branches. I usually prune it often, and as long as it doesn't please the eye, it clicks. Pruning should pay attention to observation, look at the plant type from different angles and directions, and cut off the branches that affect the plant shape to achieve the most beautiful effect.

After each flowering, the residual flowers should be removed in time to reduce nutrient consumption. After the flowering period, it is necessary to thin the overly dense branches, inner branches, long branches, and weak branches, and generally do not prune other branches or only prune the branches slightly, and should not be re-pruned, so as to shorten the number of long-term growth in the next round, and promote its early flowering and multiple flowering.

Tips

The number of pruning times of a formed triangular plum can generally be 1-3 times a year, not too much, otherwise it is easy to affect its flowering times, the triangular plum blossom period is very different from north to south, and it can bloom many times if it is well maintained, and even the flowers continue to bloom.

The Triangle Plum is a particularly ornamental plant, and frequent pruning is conducive to its healthy growth and aesthetic appearance. It is best to prune in March and April every year, and the way of pruning is divided into three methods: heavy shear, medium shear and light shear, and heavy shear is suitable for restyling; The medium shear is conducive to the pruning of the triangular plum after molding; Light pruning is suitable for daily pruning of diseased branches and shading phenomena.

Pruning method. Plastic.

There are no fixed requirements for the plastic surgery of the triangle plum, which can be determined according to personal preferences, market demand and imagination. 1 to 2 years old small potted trees, mostly into a single main trunk, 2-3 main branches of the natural open shape, umbrella shape, etc.; Trees that are more than two years old can be arranged into various tree shapes. When shaping, first determine the main stem and main branches, the same level and potential branches of the main stem and main branches are all cut off from the base, and the other branches are staggered according to the situation, and the rest of the branches should also be cut or erased from the base at any time.

The potted triangular plum is mainly fixed by the methods of discing, bending, folding, pulling and bracing, so as to achieve the shape required by the cultivator. Coiled branches are tied with millimeter aluminum wire or plastic straps, and then loosened after the branches are lignified and shaped.

Topping, pinching.

For one to two year-old potted flowers, for conventional tree shapes, the length of each branch tip should be determined according to different varieties and the number of inflorescences, etc., leaving 3-4 inflorescence topping for double-petaled varieties, 6-7 inflorescence topping for single-petal varieties, and 20-30 cm long topping for other branches. Continuous topping of the shoots throughout the growing season can promote the enrichment of the shoots and concentrate nutrients on the growth and flowering of the buds. The unused branches and weak branches, overly dense branches, cross branches, diseased and insect branches, etc., which germinate on the branches, should be erased or cut off from the base in time.

When the growth of branch tips is too vigorous and it is difficult to control the growth through topping, 150-200 times of 15% paclobutrazol wettable powder can be sprayed on the foliar surface, which has a good tip control effect.

Trim. Pruning is mainly carried out after frost and before bud break in spring, of course, pruning can also be carried out during the growing season, generally after each flowering, mainly light pruning. When pruning, the horizontal branches should be appropriately shortened, and the new branches that do not retain and disturb the tree shape should be cut off from the base, as well as overly dense branches, weak branches, overlapping branches, dead branches and diseased branches.

The vigorous bridge disturbance branches should be slightly heavier and shorter, and cut 25-30 cm long; For vigorous shoots, cut 20-25 cm long. The shortening of the retrospective is aimed at the perennial old branches, and the short interception of 2-3 buds is required to promote the germination of new branches from the old branches of the base elimination to restore the strength of the tree.