Honeysuckle cultivation methods and precautions

Honeysuckle needs to control the humidity in the breeding process, avoid excessive humidity in the growth environment when watering, and top dressing once in about 10 days during the peak growth period. The light should be sufficient, at least 6 hours a day, and pruning should be carried out during the growth process to increase the ornamentality of honeysuckle. At the same time, pay attention to changing the pot and loosening the soil during the maintenance process to avoid root injury, and keep insecticide liquid at home and spray insect repellent regularly.

Honeysuckle is drought tolerant, watering every 3 5 days to ensure that the soil is moist, the water quality can choose river water or rainwater is the most suitable, tap water irrigation needs to stand for 1 2 days and wait for chlorine to volatilize before use. In the spring and autumn growing season, 10 to 15 days apply a thin cake fertilizer, so that honeysuckle growth nutrients can be supplied in time.

Honeysuckle likes light but does not like strong light, it can bloom better after receiving sufficient, warm and bright sunlight, usually it receives more than 6 hours of light, if it is exposed to direct exposure to strong ultraviolet rays, the leaves may wilt, and the blooming of flowers will be hindered.

Pruning branches and leaves is an indispensable part of honeysuckle farming. The growth rate of honeysuckle itself is very rapid, and it is easy to have long branches and long branches and leaves, which should be cut off in time. Pruning not only ensures that honeysuckle has enough space to receive light for better growth and flowering, but also promotes the germination of new branches and improves the ornamentality of the whole plant.

(1) Change the pot and loosen the soil

Honeysuckle needs to be replanted every 3 4 years to carry out a comprehensive soil change, usually pay attention to do a good job of loosening the soil, so that the honeysuckle peanut grows loose and not compacted, and at the same time remove the weeds above, weeding hands should be light, not to hurt the fragile root system.

(2) Pest control

When breeding honeysuckle, we must pay attention to the prevention and control of pests and diseases, and it is recommended to keep some insecticides and fungicides such as carbendazim at home, and spray relevant liquids regularly to avoid the invasion of pests and diseases. Honeysuckle needs to be sprayed before and after the flowering period to avoid the residual liquid in the flower and cause it to be damaged.

Hello! How to grow honeysuckle:

1. Planting method.

Select honeysuckle seeds with full and healthy particles, then soak them in warm water, wait for the seeds to absorb water and swell, drain them, and plant them in soft and fertile soil, taking care to cover a layer of one to two centimeters of soil, and finally watering to keep the soil moist.

2. Water and fertilizer management.

In the process of maintaining honeysuckle, you can water every three to five days to keep the soil moist, avoid stagnant water, the water quality can choose rain or river water, and in the growth period, you should apply a thin decomposed liquid fertilizer every ten days to provide sufficient nutrients for the growth and development of plants.

3. Precautions.

Honeysuckle is easy to cause the invasion of diseases and insects during the growth period, so in the maintenance, it is necessary to do a good job in the prevention and control of pests and diseases, and regularly prune the plants, which can cut off old and weak branches, diseased residual branches, and overly long branches, reduce nutrient consumption, and improve the ventilation and light transmittance between plants.

Honeysuckle is maintained in pots and needs to be replenished with water and nutrients in time to meet the needs of growth. It is a long-day crop and needs to be kept in a sunny place. At the beginning of spring, the bud should be wiped, the growth height should be controlled by appropriate topping, and the pruning should be done according to the needs of the modeling.

Note that after one to two years of cultivation, you need to change the pots, prune the root system, and replace them with new potting soil.

Honeysuckle pot cultivation methods and precautions.

First, the breeding method.

1. Water and fertilizer: Because it is maintained in a flower pot, the nutrients and water absorbed are limited, and it needs to be replenished in time to meet the needs of growth. Pay attention to the application of water during the growth period, but the amount of water should not be too much, which is prone to waterlogging.

Fertilization is determined according to the growth, and the ratio of various elements should be reasonable.

Honeysuckle 2, light: It is a long-day crop, it needs to be placed in a sunny place, which can promote the growth of branches, the number of flowers will also increase, and the flowering period can be extended. If you stay in an environment where there is no light for a long time, it will have a bad effect on growth.

3. Pruning: At the beginning of spring, the buds should be wiped, and the growth height should be controlled by appropriate topping. Because bonsai are beautiful, they should be pruned in time according to the needs of the shape to become a bonsai with clear layers and even distribution.

Honeysuckle. 2. Precautions.

After one to two years of cultivation, you should change the pot and prune the root system to increase the absorption capacity of the root system. Replace with new potting soil, noting that the new potting soil is sterilized at high temperatures before use. Repotting can provide nutrients to promote plant growth and inhibit growth.

To choose the soil that is suitable for the growth of honeysuckle flowers, it is best to use fertile soil.

To fertilize it properly, you can use organic fertilizers or general chemical fertilizers, and it is best to fertilize it in spring and autumn.

It prefers sunlight, so keeping it in full sunlight will make it more abundant, and if it doesn't have enough sunlight, it will result in smaller leaves and fewer flowers. It's best to plant it in a sunny place.

It is best to use river water and rainwater to water honeysuckle, and there is more chlorine in the tap water, which can also be dried first, and then used for watering after the chlorine gas volatilizes. Watering in winter should be appropriately reduced, and it can be appropriately increased in spring and autumn, especially in summer when the temperature is high, the amount of watering should be increased. If you want to prolong flowering, reduce watering during flowering.

Breeding honeysuckle is prone to pests and diseases, common leaf spot, powdery mildew, aphids, etc., after the discovery of pests and diseases should take timely treatment measures, but do not spray pesticides a week before flowering and after flowering, otherwise it is easy to leave the pesticides in the flowers.

When cultivating honeysuckle, it is best to give sufficient long-day treatment every day, observe the dryness and wetness of the potting soil for watering, reduce watering during spring, reduce nitrogen fertilizer during flower bud formation, apply rotten cake fertilizer every other week during growth, and reasonable pruning and topping treatment.

Honeysuckle is a light-loving plant, growing faster in a sunny and long-day environment, if it is placed in too dark place, it will lead to the phenomenon of plant growth, and the branches are thin and small, and the flowering is scarce, it is best to put the pot in a sunny environment at ordinary times, and turn the pot every day to promote the growth of the plant.

Reasonable watering is one of the breeding methods and precautions of honeysuckle, in the usual time to observe the dry and wet situation of the pot soil for watering, if the soil is too dry, it is timely to water through the water, keep the soil slightly moist, in the spring to reduce watering, summer can be appropriately increased water, autumn and winter to stop watering or reduce watering.

When cultivating honeysuckle, it is necessary to provide sufficient water and nutrients, reduce the application of nitrogen fertilizer during the formation of flower buds, or stop applying nitrogen fertilizer, fertilization is mainly based on phosphorus and potassium fertilizer, in order to promote the formation of flower buds, during the growth period, a nitrogen fertilizer solution should be added, and a rotten cake fertilizer can be applied every other week.

During the growth period of honeysuckle, it is best to carry out multiple bud plucking treatment, especially in the spring germination and growth stage, timely remove the axillary buds of the apical part of the apical part, cut off the apical buds of the excessively long branches during the growth process, and prune the useless thin branches to promote the growth and development of other branches.

Although honeysuckle pests and diseases are relatively few, there are often aphids in the growth process, so it is necessary to strengthen the flow of air in ordinary times, as well as to clean up the impurities of the soil from time to time, and generally change the pot every 1 2 years to avoid the invasion of pests and diseases.

1. Soil: To choose the soil suitable for the growth of honeysuckle flowers, it is best to use fertile soil.

2. Fertilization: Fertilizer is best fertilized in spring and autumn, and organic fertilizer or general chemical fertilizer can be used.

4, breeding honeysuckle is easy to appear pests and diseases with rolling, common leaf spot, powdery mildew, aphids, etc., after the discovery of pests and diseases to take timely treatment measures, but in the week before flowering and after flowering do not spray the agent, otherwise it is easy to make the agent stay in the flower.

Honeysuckle is not only beautiful and generous, but also has a certain effect and function. It is loved by many flower lovers. What are the cultivation methods and common problems of honeysuckle, let's take a look at the relevant content.

Honeysuckle cultivation method, soil: honeysuckle has no special requirements for soil, general soil can be, the best soil is moist, rich sandy soil.

Honeysuckle transplantation: honeysuckle transplantation is generally carried out before budding in spring, planting 2-3 plants in a bush in the yard, digging deep holes, applying dry cake fertilizer and a little phosphate fertilizer as base fertilizer, watering permeability after planting; If you breed on a balcony, you can use a large pot to plant 1-2 honeysuckles, and you can water them thoroughly after planting.

Watering: honeysuckle is more drought tolerant, generally in the case of abundant precipitation, no need to water, in the case of drought climate, moderate watering; In generally sunny weather, it is necessary to water every 3-5 days after picking branches and flowers; Pay attention to drainage in rainy weather; Increase the amount of watering in the summer; Reduce the amount of watering in winter and wait for the bonsai soil to turn white before watering.

Fertilizer: When potting honeysuckle in spring, apply appropriate cake fertilizer as the base fertilizer, and then sprinkle some cake fertilizer powder on the pot surface before each stubble flower in the spring equinox, miscanthus seed, small summer and other seasons, and terminate the fertilizer at other times.

Pruning: Pruning can be carried out in spring, summer and winter, and under normal circumstances, it is necessary to re-prune the old branches with long branches to promote the growth and development of stems and leaves; In addition, when pruning, you should not cut too much, but should save two more main rods and let them bend and stretch in all directions.

Common problems of raising honeysuckle: application of chemical fertilizer: honeysuckle every spring, autumn to integrate hoeing fertilizer, organic fertilizer, organic fertilizer can be, 1 mu of top dressing urea 10 20 kg, under the main stem needs to cultivate soil to protect roots.

It is necessary to pay attention to the way of reproduction, but also to have a good growth environment, at the same time to pay attention to humidity and temperature, but also to have good light conditions, to prevent germs and diseases.

It should be placed in a sunny position for irradiation, and at the same time, the pot should be moved regularly, and the pruning treatment should be done, and the appropriate amount of watering should be paid attention to, and at the same time, it is necessary to pay attention to the time of planting.

When planting, we must choose the soil is relatively fertile and broad, and we must use farmhouse fertilizer when fertilizing, do not use the fertilizer bought outside, and often water the plants, but also to prevent the occurrence of pests and diseases, if there is a situation of small insects, then we must spray insecticides in time.