How to use rainbow waterproof coating, how about rainbow waterproof coating for waterproof coating?

Just paint it directly, and there is generally a way to use it on the packaging.

1. First of all, the first waterproof paint is painted: you should make sure that the bathroom is dry and clean, and then you can apply the first waterproof paint on the wall. The thickness of the first coat must be more than millimeters, the corners of the wall and the area around the water pipes should be painted first, and then the surface should dry after 4 hours at normal temperature, and then a full painting should be carried out.

In this process, it is necessary to pay attention to the waterproof coating evenly coated, and there should be no leakage, bubbling, cracks, falling off and other phenomena.

2. Brush the second waterproof coating: After the first waterproof coating is completed, you can wait until it is dry before you can apply it for the second time. As for the process, it takes time.

When you start painting, you should first brush the façade and then the plane, and the direction of painting between the plane and the façade is perpendicular. When the latter coating film is semi-cured, the coarse sand particles can be thrown, so that they can be combined with the cement mortar in the future construction.

3. Paving protective layer: Paving protective layer is to prevent future construction from damaging the current waterproof layer. The protective layer must be completely covered with the waterproof layer, and the combination with the base layer should be firm, so that there should be no omission, and there should be no blistering, cracking, falling off and other phenomena.

4. Water seepage test: This step is the acceptance after the completion of the project. When conducting the experiment, the water at the high point can not be less than two centimeters, and it should be stored for more than 24 hours, and then go downstairs to see if there is any water leakage.

OK.

The high-elastic thick acrylic waterproof coating is made of acrylic emulsion produced by BASF, Dow and other famous foreign chemical enterprises, so it is very strong in water discharge, basically does not contain harmful substances such as VOC and formaldehyde, and the coating has an elongation of more than 350%, which can resist the deformation of the strong base layer, which is far stronger than similar products on the market.

Precautions for the construction of waterproof coatings.

Before use, the base should be treated, the base is required to be dry, clean, flat, compact, no sanding, blistering, hollow drumming, reverse slope and local potholes, the compressive strength of the base is not lower, the moisture is less than 8%, and the yin corner should be powdered and treated.

The quality of Yuhong waterproof coating is very good, it is a relatively large waterproof coating enterprise in China, a listed company, and a well-known trademark in China.

The waterproof coating is painted on the surface of the building, and after the coating is cured, the waterproof film formed has certain physical characteristics such as extensibility and plasticity. The product has an elongation rate of more than 350%, which can strongly resist the deformation of the base layer, and is a product with strong resistance to the deformation of the base layer in the water-based waterproof material, which is suitable for indoor waterproofing of new buildings.

Precautions and key points for waterproof coatings:

Good environmental performance, water is a dispersed medium, no solvent pollution, non-toxic, non-combustible, it is a green environmental protection product (through the ten ring environmental protection certification). Yuhong high-elasticity thick acrylic waterproof coating is prepared by acrylic emulsion produced by BASF, Dow and other famous foreign chemical enterprises, the product has good water resistance, basically does not contain harmful substances such as VOC and formaldehyde, excellent environmental performance, and has obtained the German EC1+ environmental protection certification.

Easy to paint, with the same roller coating speed and tools, the base surface of Yuhong 400 waterproof coating is obviously smoother and smoother than that of other products at the same price. Yuhong dries faster than other products at the same price.

Artificial ** is different in each place, but doing waterproofing is a very small part of the cost of home decoration, and it will not be very expensive. When my home was renovated in the middle of last year, it was Yuhong waterproof to do waterproofing, contracting labor and materials, and the quality of waterproof coating was very good.

Answer: The paint contains formaldehyde, and Yuhong is the same, but the content is lower than that of other brands, and the paint contains formaldehyde, and Yuhong is the same, but the content is lower than that of other brands J90 high-efficiency reinforcing agent (special for glue): It is a new type of high-permeability wall reinforcement material composed of polymer emulsion and multi-functional environmental protection additives. It has the characteristics of good reinforcement, strong permeability, convenient construction and wide adaptability, and is suitable for reinforcing the wall before scraping putty.

Wall Beili J100 strong wall reinforcing agent: It has the characteristics of good sealing, strong permeability and high brushing strength, and is suitable for the interface treatment of concrete, mortar layer and various partition material base layers.

Artificial **different places**, different waterproofing companies** are also different. Years ago, I used the upgraded blue gold G101 color ultra-soft waterproof paint in my home, which I thought was very good. Yuhong waterproof is a waterproof national brand, the quality must be excellent, the construction master also said that their waterproof coating quality is good, many people use.

Summary. How to match Yuhong waterproof! Hello, glad to answer for you.

There is a package of liquid material and a package of powder in a bucket of Yuhong waterproof coating, under normal circumstances, according to the amount of brush area used, mix it according to 1:1, stir evenly and then paint it. According to the design and relevant technical specifications, it is usually required to be evenly brushed twice, and the thickness of the waterproof membrane is about 3mm, so that one square meter consumes.

The proportion of waterproof water added to the rainbow is uncertain about kilograms, and the water that needs to be added is not the same according to different powder and liquid materials. Type 1 Powder: Liquid:

Water 10:8(0 2), Type 2 Powder:Liquid:

Water 10:12(0 2), Type 3 Powder:Liquid:

Water 10:30(0 2). Hope mine can help you!

Do you have any other questions?

Weight ratio or volume ratio?

How to match Yuhong waterproof than the potato pro! Hello, glad to answer for you. There is a package of liquid material and a package of powder in a bucket of Yuhong waterproof coating, under normal circumstances, according to the amount of brush area used, press 1:

1. Mix, stir well, and then apply. According to the design and relevant technical specifications, it is usually required to be evenly brushed twice, and the thickness of the waterproof membrane is about 3mm, so that one square meter consumes. The proportion of waterproof water added to the rainbow is not determined by hand, and the water that needs to be added is not the same according to different powder and liquid materials.

Type 1 Powder: Liquid: Water 10:

8 (0 2), type 2 powder: liquid: water stool suspect 10:

12 (0 2), Type 3 Powder: Liquid: Water 10:

30（0－2）。Hope mine can help you! Do you have any other questions?

How to use rainbow waterproof coating? Do you need to mix water before construction?

How to make Yuhong waterproof coating clear? Do you need to mix water before construction? Hello, glad to answer for you.

The use of Qinyuhong waterproof coating is as follows: 1. Pour a suitable dose of solution into the container first, and then add powder and stir to make it a uniform slurry; 2. Treat the base layer clean to ensure that there is no dust and impurities; 3. Apply the paint evenly on the base layer, and take protective measures 4. After the waterproof layer is dry, it is necessary to carry out a two-day closed water test. 1. Under normal circumstances, water cannot be added, because the ratio of waterproof coating is designed and cracked by the merchant, and if water is added to it, it will affect its waterproof effect. The formula of each paint is strictly tested and confirmed to be correct before it is put on sale, so when using it, be sure to follow the instructions for its use.

2. When buying waterproof coatings, first of all, pay attention to the manufacturer of the product to see if it is a qualified product. Because there are many kinds of waterproof coatings on the market now, there will be certain differences in quality, so it is best to choose a qualified manufacturer to ensure its waterproof effect. Hope mine can help you!

Do you have any other questions?

Summary. How to match the rainbow waterproof.

Hello dear, the method of Yuhong waterproof ratio is as follows: Type 1 powder: liquid material:

Water-type powder: liquid: water-type powder:

Liquid: water = 10:30:

0-2）。The materials are basically two-component, and the dosage has been adjusted for use and proportion, even if it is a single component of propionic acid or polyurethane, it is ready to use out of the cap.

Extended Information: AST Synthetic Polymer Waterproofing Coatings:

AST synthetic polymer waterproof coating film is a synthetic polymer water-based emulsion waterproof coating film processed by a special process with a variety of polymer polymeric materials as the main film-forming substances, adding thixotropic agents, anti-sagging agents, anti-sedimentation agents, thickeners, leveling agents, antioxidants and other additives and catalysts, which has excellent high elasticity and excellent waterproof performance. The product is non-toxic, odorless, safe and environmentally friendly. The coating film has strong water resistance, alkali resistance and ultraviolet resistance, and has high elongation at break, tensile strength and automatic repair function.

How to match the rainbow waterproof.

How to match Yuhong waterproof than you are good, the method of Yuhong waterproof ratio is as follows: Type 1 powder: liquid material:

Water-type powder: liquid material pants: water-type powder:

Liquid: water = 10:30:

0-2）。The materials are basically two-component, and the dosage has been adjusted for use and proportion, even if it is a single component of propionic acid or polyurethane, it is ready to use out of the cap. Additional Information:

AST Synthetic Polymer Waterproof Coating: AST Synthetic Polymer Waterproof Coating, with a variety of polymer polymeric materials as the main film-forming substance, adding thixotropic agents, anti-sagging agents, anti-sedimentation agents, thickeners, leveling agents, antioxidants and other additives and catalysts, after special processing of synthetic polymer emulsion waterproof coating film, with excellent high elasticity and excellent waterproof performance. The product is non-toxic, odorless, safe and environmentally friendly.

If my answer is helpful to you, please give a thumbs up (comment in the lower left corner), look forward to your like, your work is very important to me, and your support is also the dynamic and vertical momentum of my progress. Finally, I wish you good health and a good mood!

How much is the powder, slurry, and water?

Hello dear, please refer to the above content to operate!

What does 10:8 (0-2) mean?

I'm really sorry that my reply made you unhappy, and I ask for your understanding if there is any inappropriate language.

What do parentheses 0-2 mean?

Hello dear, could you please describe your specific problem? In this way, we can provide you with a better answer. I'm sorry.

Kiss and explain what 10:8 (0-2) means?

Rainbow waterproof ratio.

Hello dear, please refer to the above content to operate!

Got it, but what does 10:8 (0-2) refer to?

Hello dear, the ratio, the above is for reference, I hope to help you round it. If my answer to the problem is helpful to you, please also give a thumbs up (in the lower left corner), I look forward to your like, your efforts are very important to me, and your support is also the motivation for my progress. I wish you good health and a happy mood again!

Hello dear! We'll be happy to answer for you. How to deal with Yuhong waterproofingA:

How to remove the rain rainbow core rotten waterproof clothes: 1. You can use acetone or banana water to drop on the waterproof stains, and you should use a brush to scrub them repeatedly, and then rinse them with water after the glue stains become soft and take off the fabric. If it doesn't work once, you can brush it several times repeatedly and finally wash it.

Do not use this method for fabrics containing acetate to avoid damaging the fabric of the garment. 2. You can use a mixture of 60 Li liquor or 8:2 alcohol (95%) and water to soak the waterproof glue stains on the clothes, and after soaking for about half an hour, you can scrub with water until it is washed, and finally rinse with water.

3. You can first use raw egg white to remove the waterproof glue on the surface of the clothes, then wipe off the loose residual particles one by one, and finally wash them in soap, and finally rinse them with water. If it is a fabric that cannot be washed, it can be applied with carbon tetrachloride to remove any residual dirt. 4. If the clothes are stained with waterproof and other stains, you can soak the polluted part of the clothes in warm water, when the stains are dissolved in water, then rub them by hand until the stains are all rubbed off, and then wash them with warm washing liquid, and finally rinse them with water.

Summary. Hello dear! How to use rainbow waterproof coating:

Pour the rainbow waterproof paint into the container, slowly add the rainbow powder when stirring, and stir for 3-5 minutes to form a uniform slurry, but it should be noted that there are no particles in the glue. Then clean up the places that need to be waterproof, use a brush or roller brush to brush the rainbow waterproof on the ground, and you must use even force to ensure that the brush in each place can not miss the brush.

How to use rainbow waterproof coating?

Hello dear! How to use rainbow waterproof coating: pour rainbow waterproof coating into the container, slowly add rainbow powder when stirring, stir for 3-5 minutes to form a uniform slurry, but it should be noted that make sure that there are no particles in the glue.

Then clean up the places that need to be waterproof, use a brush or roller brush to brush the rainbow waterproof on the ground, and you must use even force to ensure that the brush in each place can not miss the brush.

Yuhong waterproof coating use: 1. Pour a suitable dose of solution into the container first, and then add powder and stir to make it a uniform slurry; 2. Treat the base layer clean to ensure that there is no dust and impurities; 3. Apply the paint evenly on the base layer, and take protective measures 4. After the waterproof layer is dry, it is necessary to carry out a two-day closed water test.

When carrying out the construction of waterproof engineering, we must be careful to ensure that the details are in place and that there is no omission in the application, so as to ensure that the follow-up can operate normally.

1. Before waterproof construction, the base layer needs to be treated to ensure that there is no dust and impurities on the outer layer, otherwise it will affect the future use. 2. When doing waterproofing, it is necessary to deal with the details of the connection between the sewer and the ground, and if it is not handled well, there will be water leakage, once the water leakage will affect the future use, and it must be repaired again, which will cause unnecessary costs.

3. When painting the paint, it is necessary to ensure that each place will not be missed, especially the joints between the wall and the ground, because the corner can be used to wipe the joints during waterproof construction, and the height of the wall waterproof should be more than one meter.

Hello dear! The above is the use of rainbow waterproof coating, in order to ensure that it can be used normally in the future, we must pay special attention to waterproof construction, each waterproof coating must be coated balanced, to ensure that there is no omission, otherwise it will have to be reworked in the future, which will cost more money, the gains outweigh the losses, I hope to help everyone.