What do you need to pay attention to in the kitchen cabinet body?

At present, there are 16 mm, 18 mm and other thickness specifications on the market, the cost of different thicknesses varies greatly, and the cost of this thick plate alone is 7% higher, but in terms of service life, the cabinet made of thick plate can ensure that the door panel is not deformed, the protection of the table top is not cracked, and the service life can be more than doubled. At present, the market adopts the latest third-generation box rod tenon structure plus fixings and quick assembly parts, which is more effective in ensuring the firmness and bearing capacity of the box, and is also more environmentally friendly, in the combination part, the cabinet assembled by the conjoined body is 2-3 times different from the cabinet assembled by the single body, and the difference in cost is 5%, and the back plate must choose to do double-sided sealing, otherwise the single-sided seal back plate is easy to be damp and mildew in the kitchen environment, and it is easy to release formaldehyde, causing health hazards. At present, there are cabinet brands to launch the cabinet body of anti-cockroach silent edge sealing, which can alleviate the impact when the cabinet door is closed, eliminate noise while preventing cockroaches and other pests from entering, while the cost of no cockroach edge sealing is 3%.

At the same time, the edge banding of high-quality cabinets is delicate, smooth, good feel, the sealing line is straight and smooth, the joints are fine, and the professional factory uses a linear edge banding machine to complete the edge banding, broken end, trimming, chamfering, polishing and other processes at one time, and the gluing is uniform, and the pressure of pressing and sticking the edge is stable to ensure the most accurate size. Because the cabinet is also a furniture product, the state has a clear provision to issue a finished product test report and clearly indicate the formaldehyde content, and the brand provides a test report with the words "finished product qualified" to prove that its products are qualified. The hardware accessories of the cabinet play a non-negligible role in the use of the whole cabinet, especially the slide rail of the drawer and the bearing at the joint, although these are small details, but it is an important part of the quality of the cabinet, the size error of the hole position and the plate will cause the error in the size of the slide rail installation, so that the drawer is not smooth or loose, the bearing force is small, etc.

Do not conflict between the opening of the kitchen door and the opening of the refrigerator door; Drawers should never be set in the corners of cabinets; The floor is suitable for non-slip and thick floor tiles, and the interface should be small, which is not conducive to the accumulation of dirt and is easy to clean. There are many electrical appliances in the kitchen, so more jacks should be reserved, and leakage protection devices need to be installed. The lighting in the kitchen should be sufficient, and the light emitted must be white, otherwise it will affect the color judgment, so that it is impossible to distinguish whether the food is cooked or not.

At the same time, it is necessary to avoid shadows caused by the light, so spotlights are not suitable for use. Before decorating the kitchen, you need to take into account the radiators in the kitchen to prevent the cabinet doors and drawers from colliding with them; Do not collide with the opening of the kitchen window and the sink faucet.

Take two measurements of the kitchen so that you don't have to be passive afterwards. The distance between the stove and the sink should not be too far or too close. Refrigerators are trending in kitchens, but they should not be located close to the stove, as the latter often generates heat and is a source of pollution, affecting the temperature in the refrigerator.

The refrigerator should not be too close to the vegetable sink to avoid leakage caused by spilled water. The cutting board should be placed near the window, preferably in the sun. Avoid approaching the window of the stove to prevent the fire from being blown out by the wind.

Generally, small factories or manual on-site production can only be connected with screws, rivets or adhesives. The latest third-generation box rod and tenon structure plus fixings and quick assembly parts are used to ensure the firmness and bearing capacity of the box more effectively, and less adhesive is used, which is more environmentally friendly.

1. Kitchen lamps.

Kitchen decoration lamps and lanterns should be waterproof lamps such as anti-fog lamps, etc., the joints of the line should be strictly treated with waterproof insulating tape, so as to avoid water vapor condensation into the in, resulting in short circuit and fire. Kitchen lighting needs to be divided into two levels: one is the lighting of the whole kitchen, and the other is the lighting of washing, preparation, and operation.

2. Choose wood products carefully in the kitchen.

When using a large number of wood products in the kitchen, attention should be paid to the perfection of the ventilation and ventilation system of the kitchen to avoid water vapor from accumulating on the floor and wall for a long time, causing the wood products to crack and deform, or even rot.

3. Kitchen curtains.

The curtains in the kitchen should be made of aluminum alloy lacquer-coated blinds, and fabric curtains should not be used as much as possible to avoid being difficult to clean after being stained with oil.

4. Kitchen area.

The usable area of the kitchen should be moderate, too large is undoubtedly wasteful, and too small will be crowded, and the reasonable area should generally be about 10 square meters. It is also necessary to ensure that the kitchen space is properly lit and properly ventilated. If the kitchen is large enough, a small dining table can be placed so that it can double as a dining room, and there is no need to find another space for the dining room, and a carpet can be placed under the dining table to divide the space.

If the kitchen area is small, you should pay attention to storage.

5. Kitchen ceiling.

The top surface and wall surface of the decoration kitchen should be made of fireproof, heat-resistant, and easy-to-clean materials, such as glazed tile walls, aluminum ceilings, etc. The ceiling of the kitchen should consider the use of waterproof products, that is, waterproof gypsum board, water-resistant putty and high-performance waterproof latex paint, so that it will not cause inconvenience in use while being beautiful.

6. Kitchen tiles.

The selection of decoration wall tiles should consider the illumination of indoor light, and too bright and too dark spaces should be matte and elegantly colored tiles to avoid light pollution and visual fatigue. In addition to considering the color and gloss, the choice of floor tiles should also pay attention to the comfort of use, and the non-slip tiles should be selected, and the interface should be small to prevent the accumulation of dirt and be easy to clean. Do not use mosaic flooring.

In order to avoid slipping and falling, causing bodily injury.

7. Kitchen storage.

The function of the kitchen determines that it is the most "dirty, messy, and poor" place in the home environment. How to make the kitchen beautiful and tidy is another important purpose of kitchen decoration in addition to convenient functions. To make full use of the space, use counter cabinets, wall cabinets, etc., and wall cabinets are generally made into multi-layer lattices 30 to 40 cm wide.

The furniture should be closed as much as possible, and all kinds of utensils and items should be stored in the cabinet, which is hygienic and neat. The low cabinet in the kitchen is best made into drawers, which are easy to access and place, and the vision is also better. The gap between the wall cabinet operating platforms can be used to fetch some of the utensils needed for cooking.

8. Kitchen fume problem.

The height of the range hood is subject to the height of the user, and the distance between the pump hood and the stove should not exceed 60 cm. Installing the cabinet first and then installing the range hood is the most likely to cause trouble, so it is best to install it at the same time as the cabinet. When buying household items such as range hoods, the Chinese style has stronger suction than the European style.

Some embedded appliances are often installed in the cabinet, such as: disinfection cabinets, ovens, dishwashers, etc., and most people will leave the power supply of electrical appliances behind the embedded cabinet, and plug them in directly during installation, and then they can only be controlled by the switch in front of the electrical appliances.

In fact, it is best to leave the power socket in the cabinet adjacent to the embedded electrical appliances, make a hole in the partition between the two cabinets, and pass the power cord through, so that it will be much more convenient to use in the future, and the power supply does not need to be plugged in all the time.

In addition, such as the oven such a large heat electrical appliances, in the installation, it is best to pad asbestos and other thermal insulation materials on the internal plate of the cabinet, and the cabinet must be left with a good place for heat dissipation, if it is installed on the island, then the back of the cabinet should be made to be open, so that when in use, the entire back can be opened for heat dissipation.

1. The stove is best not designed to the group of cabinets against the wall, there will be a lot of inconvenience in use, there must be a distance between the stove and the sink, because these two places are easy to put heavy things, too close, the back of the day is easy to deform, and there is a countertop in the middle, and the cleaned raw materials are also placed on it, which is convenient to take when stir-frying.

2. When leaving holes for microwave ovens and other electrical appliances, do not fit tightly with the size used now, in case it needs to be updated in the future, it may not be able to be put in.

3. A group of cabinets on the most edge, we must consider the direction of opening the door and the installation of the handle, many times after the installation is completed, the handle will hit the wall or other cabinets, which not only makes the current cabinet unable to fully open the door, but also easy to damage after long-term bumps.

4. Don't design too much of the flap door, generally the flap door is a group of two up and down, but it is really difficult for a woman like me who is 160 tall to use the upper flap door.

1. We should pay attention to a reasonable layout when installing cabinets, not only to facilitate the use of the kitchen, but also to reflect the aesthetics, such as the placement of the stove appliances should be far away from the pool on the countertop, and the power plug should be close to the stove appliances, so as to facilitate the use and prevent the potential safety hazards of electricity.

2. First of all, check whether the color of the quartz countertop is consistent with the color when you bought it; Secondly, we can use a harder sharp weapon on the table to test the effect; At the same time, it is also necessary to see whether the countertop interface is slender, the finer the better.

3. We will generally carry out some rectification before installing the cabinet, and there will be some discrepancies with the original design drawings, so we must make rectification in time when installing.

4. Whether the wall cabinet is installed well or not directly affects the installation effect of the cabinet, which requires us to pay attention to ensuring the quality when installing the wall cabinet, ensuring the level of the wall cabinet and the ground, and the wall vertical. At the same time, after the installation of the wall cabinet, the levelness of the wall cabinet should be checked.

5. When installing cabinets, although the installation and matching of large parts are very important, the installation of hardware can not be sloppy, because hardware is the premise of convenient use of cabinets, if the hardware is not installed, it means that the use of cabinets is also a problem. Therefore, the small parts of the cabinet should not be neglected. You have to take a closer look at the front and back of each door panel, whether there are scratches or inconsistent colors.

6. When we install the cabinet, we must pay special attention to the layout of the water and electricity transformation, which is because the cabinet needs to be connected with the water pipes and circuits in the kitchen.

7. Fill the basin with water to check whether there is any leakage, and check whether the pipe under the basin is connected, and do not put the residue or other things in the basin in the process of use, because the sewer pipe is so big, and the impurities will be moldy and block the sewer for a long time.

8. After the cabinet is installed, you can shake it with your hand to see if the door is loose, the screws are not tightened, the door will be unstable or will fall down for a long time, you can learn from the master on the spot how to adjust the door hinge of the door panel, because this problem will inevitably occur after a long time.

1. Before installing the cabinets, the wall tiles and floor tiles in the kitchen have been pasted, and in order to prevent damage to the wall and floor, on-site protection is required. The cabinet is wooden, which is less damaging to the ground and can be protected with colored striped cloth. Mul.

2. During installation, many materials will be stacked in the room at the same time, which is very easy to throw things in chaos. Generally, the cabinet installation time varies from 1 to 3 days. Therefore, it is recommended to dedicate a special area to classify these materials, in case they are lost, it will take longer to match. Mul.

3. Range hoods, stoves, vegetable washing basins, etc., it is best to arrive in advance and install them synchronously with the cabinets. Even if it's too late to settle down, you need to get the size in advance. When installing the cabinet in this way, the hole should be left and the reserved position should be calculated. Mul.

4. If microwave ovens, ovens, refrigerators and other electrical appliances need to be embedded in cabinets, the position of the switch and the size of the current must be designed in advance according to the size, to see whether to install 10A or 16A, if the site is adjusted, it is too troublesome. Mul.

5. The components of the cabinet, such as cabinet panels, panels, Roman columns and other components, will generally be protected by paper shells when they leave the factory. Mul.

6. The installed cabinet back panel should be kept at a distance of 2-3cm from the wall. Tatar Jacket Ben Zhu Ambiguous DaiDangerous? Smash? 粲幸huanǖ conspire to comfort Zhanhuan?