What do I need to pay attention to when buying an outlet in the kitchen?

The kitchen is heavily oiled, and oil and detergent have a certain corrosive effect on plastics, and the socket panel is easy to crack if it is stained with oil for a long time. It is recommended that CHINT anti-oil kitchen safety socket is made of oil-proof materials, which has obvious oil resistance and protects the panel from oil stains and detergent damage, making the socket safer and longer-lasting.

1. It is best to buy all electrical appliances in advance, and decide whether it is left or right according to the left and right positions of the specific socket.

2. Kitchen switches and sockets should be avoided from being installed around the gas stove.

3. The gas water heater socket should avoid the water heater, the inlet and outlet pipes and the gas pipe, and try to stay in the wall position to facilitate the layout of the flue.

4. Many people are accustomed to using the same socket for two electrical appliances, but from a scientific point of view, if two electrical appliances are used at the same time, the current required is larger. After a long time, even if the socket is not damaged, the wiring in the wall is easy to deteriorate, which can lead to danger. Therefore, it is best to use one socket for one appliance.

5. In the kitchen, not only should sockets be installed for range hoods, refrigerators, rice cookers, etc., but also spare sockets should be reserved, and at the same time, consider whether the countertop corresponds to the location of those electrical appliances.

6. Sockets cannot be installed under the gas stove. If you are using an electric stove, you can install an outlet on the back wall at a height of 50 to 60 cm above the ground.

7. Some kitchen sockets are best installed with switches, such as microwave ovens, range hoods, etc., so as not to always pull out the plug when used in the future.

8. The socket of the range hood is generally about one meter away from the ground, and the middle position of the range hood is taken. The sockets of microwave ovens and sterilizers are generally about 2 meters from the ground; The sockets of electric appliances such as rice cookers, small ovens, juicers, electric kettles, and induction cookers are generally five-hole, with ground wires, and about meters from the ground; The socket of the oven is generally about 50 cm from the ground; The socket of the refrigerator is about 50 cm from the ground; The socket of the gas stove with an induction cooker should be prevented from being in the gas stove cabinet up, about 50 cm from the ground.

Kitchen to buy sockets to pay attention to 1Choose a high-current socket because there are many kitchen appliances and high power. 2.

It is necessary to choose a socket made of oil-proof material, because oil and detergent have a corrosive effect on ordinary plastics, and if it is contaminated with oil for a long time, the socket panel will crack, affecting the safety and life of use. 3.It is best to choose an outlet with a switch, because kitchen appliances are used frequently, and frequent plugging and unplugging will affect the life of the socket and appliances, and it is not safe.

It is recommended to buy a special kitchen socket, such as the CHINT oil-proof kitchen safety socket, which is a special kitchen socket.

1. Many people underestimate the number of kitchen appliances before the decoration, thinking that it is enough to reserve a socket, and then they feel too naïve, the electrical appliances are constantly increasing, and the problem comes out all of a sudden, the refrigerator should fix a socket, a water heater, a range hood, a rice cooker, an induction cooker, and all kinds of electrical appliances make you want to give each appliance a jack. If you use the strip, it will be covered with oil in less than a month, so it is very difficult to clean. Therefore, when renovating the kitchen, be sure to reserve enough jacks.

In addition to the number of sockets is not enough, the waterproof box has not been used, people who often use the kitchen know that the socket is always more oil than you think when cleaning, but also pay attention to the water can not be stained, if there is a waterproof box, it can prevent dust, it can also prevent oil, and it is easy to take it down and clean, if you really don't want to clean, change it to a new one, and it doesn't cost anything to buy one. No matter how good the range hood is, there will always be fumes that come out.

2. In addition to the number of sockets to be sufficient, it is best to equip each socket with a waterproof box, the socket in the kitchen is often stained with all kinds of oil, and can not be wet, if you install a waterproof box, it can prevent both dust and oil, and can also be taken down and cleaned, if you don't want to wash it can be replaced directly.

3. The use of sockets with switches is not only energy-saving and safe, but also avoids frequent plugging and unplugging, and increases the life of electrical appliances and sockets.

The kitchen is arguably the hardest place to clean up in the house, with a lot of oil and dust. The above is the kitchen decoration experience shared by Zhumei and friends who have not started to decorate, I hope it can help you.

The kitchen is important for a family, and all three meals a day are produced in the kitchen. Especially for a housewife, it is very lucky to have a good kitchen. With the continuous advancement of science and technology, more and more household appliances are used in the kitchen.

Frying and frying can be said to be the same as changing an electrical appliance. Although more electrical appliances make our three meals a day much richer and the nutrition at home is also guaranteed, if the kitchen socket is not installed properly, it will cause the kitchen to be in vain.

In the kitchen, in addition to chopsticks, there are knives and forks. Once something happens because there's too much chaos, it's not good. Today, Bian Xiao introduced several simple and practical socket installation methods.

It can be said that installing the socket in this way will make a big difference in the kitchen, making it easier for you to use and guaranteeing that you will fall in love with this kitchen.

First, people who often cook in the kitchen know that once the kitchen is busy, it is almost impossible to stir-fry here, and the rice in the rice cooker there is also cooked, and it is inevitable that your hands will get wet when cooking and washing vegetables. It is very unsafe to unplug the rice cooker with water by hand, but if you do not unplug it at this time, you will worry about wasting electricity. What should you do?

If you are afraid of such a problem at home, you must remember to tell the owner to install a socket with a switch when making a kitchen socket. When you're done with electricity, simply turn off the switch gently. No need to plug in and out frequently, and don't risk pulling the plug by hand.

It is very safe and practical, and it also prolongs the life of the socket.

Second, there is also the issue of security. If you're installing an outlet next to the sink and cooktop, be sure to install one with a waterproof cover to avoid damage caused by water spraying into the outlet when washing or cooking.

Thirdly, as we said, there are more and more appliances used in the kitchen. Sometimes when cooking, it is common to use several appliances at the same time. Therefore, the socket in the kitchen must not be installed less.

If there is less installation, the cooking time will be extended. Then there will be the problem of installing too many outlets. Too many kitchen sockets can be too messy.

It is often inconvenient to move electrical appliances around one by one, so you can consider installing one.

If you need to do this, you can get a good feeling, and you will feel very convenient in life, no matter what you are doing or cooking, you will feel very good.

It is necessary because I find such a switch very convenient to forget to avoid unplugging.

Of course, it is necessary, so that it will be safer, and the choice of needs can be more important.

The kitchen needs electricity, so you need to use a socket, how to choose a kitchen socket? Today, I will answer them one by one for you.

1. Weigh the weight.

The copper wire sold inside the socket that meets the national standard is thick and the plastic shell is tight, so the weight is heavier, and the unqualified socket will obviously feel much lighter.

2. Press the switch repeatedly.

You can repeatedly press the socket switch, and the qualified socket opens and closes freely and the sound is crisp; Unqualified sockets feel stiff and easy to stuck.

3. Test plugging and unplugging force.

The qualified socket not only has a moderate and flexible plugging and unplugging feel of each hole, but also has a cautious and consistent plugging and unplugging feel of each jack; The plugging and unplugging force of unqualified sockets is too loose or too tight, the elasticity is poor and easy to loosen, and the feel of each hole will be different.

4. Pull the power cord.

The power cord of the Hekuan bucket grid socket feels moderately soft and hard, and the connection with the socket is solid and reliable; The power cord of the unqualified socket feels soft, and the connection with the socket is not firm and it is easy to pull off.

Kitchen decoration socket purchase tips: material, depends on the aesthetics, versatility, safety factor of the socket switch - that is, the main content you pay attention to is determined by the material of the socket switch. Socket switches can be roughly divided into three parts:

Control panel, electrical conductors, and chassis (in fact, the base behind the control panel is removed). Control panel and pedestal, three common materials - engineering plastics (ABS), polycarbonate (PC), and electric jade powder. In addition to this, there are also updated products, such as polyester 66, etc.

Below we take a closer look at the properties of each of the several types of raw materials.

Engineering plastics are the most cost-effective, and they are also the most accessible plastics. The plastics used in vehicles, mobile phone cases, computer keyboards and other products mostly use ABS plastic. It is used in hardware, which is characterized by good insulation performance, but is not harmed by environmental factors such as ambient temperature and environmental humidity.

However, as the cheapest kind of plastic, the defects of ABS plastic are also obvious - low service life, poor patience, easy deformation, and easy color fading.

At present, only the socket switch equipped by real estate developers can still see the ABS plastic figure, and the ABS material is almost rare when the customer decorates himself. Polycarbonate plastic (also known as exo glue) is the plastic with the highest market share of electrical equipment - the plastic on the mobile phone is also susceptible to PC plastic. Impact resistance, anti-aging, not easy to fade, good hand feel, the key to becoming PC plastic can beat ABS plastic.

For the electrical industry, the flame retardant grade of PC plastic will be better than ABS, and the insulation performance is very similar to ABS.

Compared with PC material, electric jade powder plastic has strong temperature resistance, and the rest of the functions are very similar to PC material. It is mainly used in special sites in the electrical industry - factories, distribution rooms, power supply networks, etc. Because of its high **, it is less used by the family, and it is not necessary.

Polyester 66 is an updated commodity based on ABS plastic. The impact toughness is the largest among all plastics, but the flame retardant grade and insulation properties are weak. It is commonly used as a pedestal and is rarely used as a control panel.

Metal materials, there are some new products of the base like to apply metal materials. However, users should pay attention to the fact that the base of metal materials is not necessarily better than that of plastic materials. The flame retardant grade of metal materials and mechanical equipment types are higher, but the insulation performance is far less than that of plastic bases.

Compared with the PC material, the alloy base can be regarded as the middle of the match.

When decorating the kitchen, I personally feel that the socket should be selected from a regular manufacturer, and the big brand products are used almost every day because the kitchen socket is used.

The kitchen socket should be equipped with a swivel and splashproof socket, which is easy to use, and the automatic protection baffle will be closed when the plug is removed, effectively blocking the erosion of water and oil.

The kitchen is generally a place where more electrical appliances are used, so try to choose a better brand when choosing a socket, and try to choose a socket with a grounding wire in the kitchen.

The kitchen is a place for cooking in the home, and with the development of intelligent home, the kitchen orange hostel appliances are becoming more and more intelligent, so the choice of kitchen socket is very important. Many people will wonder: will there be a difference between a kitchen socket and a regular socket? Let's take a look.

In fact, what is the difference between a kitchen socket and an ordinary socket, they are all the same sockets. It's just a difference in appearance.

The socket is mainly divided into two holes and three holes, in addition to 10A and 16A, the most common are 10A sockets, which can withstand the maximum electrical power within 2200W, and the 16A socket can withstand the electrical power of the round stool within 3500W. The 16A socket is not suitable for connecting other electrical appliances due to the different hole spacing from the ordinary socket, and the 10A air conditioning socket is the same as the ordinary socket, and can be connected to any kind of household appliances less than 10A with bending.