How do I get rid of the white on the wall quickly?

This wall can be handled by itself.

1. If it is a large area, I recommend finding a professional to deal with it.

2. If it is a small part, you can deal with it yourself, the way is to spray the wall wet with a watering can, and after about 8 minutes, you can remove it with a flat shovel.

Scrape the white. It is a kind of interior wall decoration of the building, and it is also the most common kind of wall decoration of ordinary residences.

and cellulose (a chemical binder.

easy to dissolve in water) will fill the wall, ceiling to fill the sand hole degree scraped flat and white.

Ways to quickly remove the big white on the wall:

1. If there is a big white painting on the cement wall, and now you want to dispose of it, you can use a roller to dip it in water, and wait a few minutes to use a shovel to come down.

2. If it is painted on a rough wall, you can wet it with water, and then brush it with an iron brush.

3. If you want to paste tiles after processing Dabai, you can simply use cement and 107 glue to find the joint surface, and then paste the tiles.

Let's take a look at the big white form in the movie:

1. Cute ordinary form.

In this form, Dabai is just a robot personal consultant, a rigid robot who does everything the owner says, but sometimes it is very cute.

2. Taekwondo doctor form.

After the Taekwondo program was entered by Ah Hong, Dabai became smarter and more powerful, and could protect the safety of his master.

3. Invincible God of War form.

Dabai was transformed into a super robot with wings, boosters, rocket punches, and invincible armor by Ah Hong, and although it has reached the pinnacle of form, there are still some places where it is still powerless.

Fourth, the ruthless demon form.

The chip that the original owner, who is the elder brother of the protagonist Ah Hong, gave Da Bai contains the criterion that it cannot harm humans, and after being replaced by the protagonist Ah Hong with the human who can hurt Ah Hong wants to hurt, his eyes turn red, and he will rush towards the target desperately, no matter who blocks it, he will be ruthlessly pushed away, and even hurt.

1. If you paint a big white on the cement wall and want to dispose of it in time, you can use a roller to dip some water and shovel it off after a few minutes. 2. If you are brushing white on the rough surface of the wall, you can wet it with water, and then brush it off with an iron brush. 3. If you need to paste tiles after processing Dabai, you can mix it directly with cement and 107 glue after simple treatment, and then find the joint surface and paste the tiles.

Related knowledge popularization: 1. Scraping the wall is a kind of interior and wall decoration in the building, which is to paint the white color on the wall of the residence. Scraping is to mix the large white powder, talcum powder and cellulose used in construction into a mixture on the rough surface of cement, and scrape and whiten the wall and the top.

2. Smear the white at the construction site.

It is more common because it replaces the original large white powder fiber slurry wall. The cost is very low, and the construction speed is relatively fast, easy to repair, can fill the wall with depressions, can also scrape off the entire surface, usually after the primer layer has dried, generally does not produce cracks. 3. If you don't know how to operate, it is recommended to find relevant staff for door-to-door processing.

Use plaster or precipitated calcium powder, which can be removed by rubbing it on a cloth.

Stains on the walls can be removed by rubbing them with plaster or precipitated calcium powder, or by rubbing them with fine sandpaper. Squeeze some toothpaste on a damp cloth to wipe off the pencil or colored crayon on the wall.

Stains on paper and cloth wallpaper cannot be washed with water, and can be erased. The new oil stains on the colored wallpaper can be removed with talcum powder, and the absorbent paper is placed on the talcum powder, and then ironed. For example, the stains on the plastic wallpaper can be sprayed with some detergent and wiped with a wrung out cloth to make it look new.

Dust

After we move into the house, even if we are very careful, there will still be a lot of dust on the walls after a long time, and when we remove this dust, we only need to gently sweep it with a duster or brush.

Handwriting

If there are bear children in the house, they must have this kind of pain, and if they are not careful, the child will take a pen and scribble on the wall, and the handwriting left on the wall is quite difficult to deal with.

Coffee stains

Coffee stains are difficult to remove no matter how they are sprinkled. If the sprinkle on the wall is relatively short, you can dip it in the diluted 84 disinfectant solution and wipe it. For a longer time, it can only be sanded with sandpaper and then covered with chalk.

Mildew

Sometimes, due to the weather, the wall will be moldy, and the mold stains on the wall can be gently wiped with a rag dipped in bleach and gently wiped on the place where the mold stains appear. Then use a hair dryer to dry and keep the wall dry.

1. Step 1: Treatment of old walls before renovation. Before the renovation of the old wall, we need to remove the putty layer and latex paint painted on the original wall, as well as other decorations, such as wallpaper, wood decoration, etc., together with the removal.

It is convenient to renovate later. If it is a newer wall, which has only been painted for less than a year or two, then just use sandpaper to polish the wall, do not have to scrape off the water-resistant putty, and repaint the wall after sanding.

2. Step 2: Clean the wall. Before renovation, it is also necessary to carry out wall base treatment, and the heavily painted areas need to be completely eradicated and then plastered with white cement. Pay attention to the shoveling of the places where the bond is not strong, so as to facilitate the application of new paint.

3. Step 3: Primer. When renovating old walls, remember to be sure to apply hand difference and primer, which is used to seal the substrate, resist alkali and moisture, protect the topcoat and improve the texture and hiding power of the topcoat.

If you don't brush the primer, there will be signs of blistering and mildew after a long time, so you have to renovate it in the celebration manuscript line.

4. Step 4: Large-scale repair. When renovating, the color of the original wall topcoat and the new topcoat will inevitably have a color difference, and it is more troublesome to repair because the painting time is different, and it is also prone to quality problems.

Therefore, it is best to renovate the entire wall or to renovate as much as possible, so that the color difference can be avoided and the quality is better.

5. Step 5: Anti-color aberration. As mentioned above, the color difference is to avoid as much as possible in the renovation of the wall, in addition to the large-scale renovation, we also have to estimate the amount of renovation in advance according to the description of the paint ratio, painting.

Paint the wall at one time to avoid the color difference in the secondary ratio.