Canon MP198 printer problem, please advise

532 yuan is not expensive, I bought it 3 months ago when it was more than 600.

I feel a little reddish when this printer hits**, but the clarity is okay.

Ordinary A4 color will be a little distorted, it feels like an oil painting, and the color is a little too bright.

As long as you add ink to the outer cartridge, try not to touch the inner cartridge.

If the cartridge is broken, of course, it is necessary to replace the cartridge with a new one, the life of the cartridge is about 1 year, and if the environment is better, it will be useful for 2 years.

Take out the paper when the printer is not in use, close the lid and the front outlet, and add an air filter to the vent of the outer ink cartridge.

If it is not used frequently, remember to clean the print head every 1 week, and once every 3 days in dusty places.

The effect of low-end printers is average, and there is no problem with home use.

You only need to add ink to it, and you don't need to change the ink cartridge.

Even if you use the cartridge for a long time, there will definitely be a problem, and there is no way to solve this.

First, turn off the printer, wait for the light to go off, and then unplug it. To reconnect the power cable, first press and hold the printer power on button, and press the recovery button below the power on button three times in a row when the green light is on.

Detailed steps: 1. In the pop-up prompt page, "The following cartridges cannot be recognized, black. page, click Cancel Print.

2. Check the printer, the yellow light keeps flashing.

3. First turn off the printer, wait for the indicator light to go out, and then unplug it.

4. To reconnect the power cable, first press and hold the printer power on button, and press the recovery button below the power on button three times in a row when the green light is on.

5. Let go, the printer is not turned off at this time.

6. Restart the printer, and you can find that the problem of unrecognized ink cartridges has been solved.

7. You can use the printer to print as usual on the computer.

The Canon MP288 printer shows 1 instructions that the cartridge is not installed correctly, and the cartridge is installed correctly.

Possible causes and solutions:

1. If the fault still exists, the cartridge may be defective, replace it with a new one.

2. The temperature sensor of the ink cartridge is wrong, and the ink cartridge is reinstalled.

3. If you install an unsupported cartridge, replace the one that is supported.

Solution: Remove the ink cartridge and reinstall it, or it may not be changed even if the supply is not corrected, and if it is not processed well, it is easy to detect the color cartridge. The color cartridge is connected to the small elbow and put the white clip on the lid to top the elbow part.

1-3.Other faults.

7-segment LCD cause troubleshooting.

When the E20 wireless LAN is trying to be set, wait for the other items to be set before trying to set the WLAN. Settings are being executed at the same time.

When the E23 is set up on the WPS wireless LAN, multiple access is detected and waits for a while before performing the setup operation. Access Point AP

When the E24 is set up on the WPS, there is a confirmation of the access point AP before performing the setup operation. Mistake.

E50 printhead alignment proofs scan failed. Press the Stop Reset key to clear the error, do the following, and then perform the printhead operation on it again:

Confirm that the sample orientation is correct.

If there is dirt on the platen glass, clean it. -Confirm that you are using A4 plain paper.

Perform a print nozzle inspection pattern operation to confirm that all cartridges are properly inkjetted. 2.Adjust Settings 2-1Repair mode.

Repair mode procedure >

Use the repair tool on the connected PC. 1) The printer enters repair mode.

i.Disconnect the printer from power, press the ON button while pressing the STOP button, and hold it down. (Don't let go.)

these two buttons).

ii.When the power LED is green, press and hold the power button and release the stop button (do not release the power button).

iii.While holding down the ON button, press the STOP button twice, then release the ON button and STOP button. (Each time you click the STOP button, the warning and power LEDs will flash alternately.)

orange, the power light is green, starting with the warning LED light).

iv.When the power LED is green, the printer has entered service mode, and the 7-segment LCD display shows '0'2) Open the repair tool on the connected PC.

i.This function is performed when you click a button in the Repair Tools dialog box. During the run of the feature you selected, the dimension.

All other buttons on the repair tool are grayed out and unavailable.

ii When the function you have selected is finished, a "a function was finished" will be displayed, and you can select another function.

iii If you select an unsupported feature, it will show "Error! ” error!Tips. Click on the error message pair.

The OK button in the dialog box will exit the error.

A failure of the Canon printer MP288 may cause the printer to not work properly. These failures include the following:

1.The printer won't turn on or doesn't respond with a key.

The printer may have a power failure, and if the power supply is not turned on or the heated noxin is not preheated, the printer will not work properly. The cause of a power failure can be a loose power plug, a damaged power gate, or an issue with the AC source supply.

2.The printer was unable to complete the print job.

This can be caused by a problem with the printer consumables (such as a toner or ink cartridge), a faulty print head, insufficient memory, or a faulty transmission. Inspect the printer consumables and make sure they are installed correctly.

3.Poor print file quality.

When the print quality is low, you may need to replace the print head or adjust the printer settings to fix the quality issue. Lack of ink or toner, or consumables that have expired, can lead to quality issues such as blurry, streaks, or missed prints.

4.The printer is paperless or jammed.

If the printer does not detect the paper during the printing process, the paper is jammed or the paper is not installed correctly may cause the paper to be inaccessible or pierced, resulting in the printer not working properly.

5.Printer error code.

When the printer fails, an error code may appear, such as "E02", "E25", and so on. Find your printer's manual or search for a related issue to find information about fixing the problem.

In the event of these failures, you can try adjusting the printer settings or replacing the printer parts to fix the problem. If you are unable to resolve the issue yourself, it is advisable to seek professional technical support to ensure that the printer is back in working order.

<><5. In this way, the new toner will be taken out.

<>7. Next, push the printer back.

8. Finally, the ink cartridge will be replaced after closing the capacitor cover.

One. The cartridge is in the printer, and it will definitely dry after a lot of time. The printer will not be damaged.

Two. Suppose you are using even inkjet cartridges now? Is it a continuous offering?.If you use it now. If you want to use the original one back in the future, it's no problem at all. Just buy a new cartridge and install it.

Three. How many original ink cartridges can be played**, there should be on the manual, maybe not, but the ink in the ink cartridge is somewhat lost in the printing**, it is difficult to say the correct number. The advantages and disadvantages of original cartridges and continuous supply are basically the same.

Even if the original ink runs out, you have to buy a new cartridge. **Relatively expensive. It's just a matter of saving money on ink.

The difference is here, there is not much difference between the printer and the effect, and after the change is continuous, the ink can be added directly when it is gone. Until the printer breaks. Or the sprinkler head is broken, four.

The original cartridge should be replaced with a different kind of inkWhy would you want to switch to another ink? If you change the ink to other inks, it will cause the printhead to clog.

Not necessarily. If you want to change it to a continuous supply, you can change it to a similar ink, basically the brand should be the same, or it can be replaced. Because it is changed to continuous supply, it is basically replaced by ink.

You can buy it online and it's cheap. A copy of ** can cost a dime or a few cents to print it out. Of course, photo paper is also purchased online, and it may be about a maximum of three dollars.

Fifth, don't think about anything else. You go online, enter your printer model, brand, and add the reconnection supply at the end. There is a ** textbook for this printer on the Internet. You can see it yourself at a glance.

Sixth, your printer and printhead should be one. If you have strong hands-on ability, the original ink cartridge ink is gone, and you can also make a hole in it. Add the ink directly with a syringe.

Then seal it with glue, so that there may not be any trouble in changing the supply. The choice is yours. There are also tutorials on how to add the original ink directly by yourself.

Find out for yourself.

Canon printer mp198 shows e5, steps to solve:

1.Place a piece of paper in the back card slot. In the shutdown state, press and hold the "Stop Reset" button, and then press the "Power" button.

Keep holding the Power key, release the Stop Reset button, press the Stop Reset button twice, and release it along with the Power key when you press the Stop Reset button a second time. (It is said on the Internet that the display will display "0" at this time, which means that it has entered the maintenance mode.) But the display of my machine has always been any display nor either).

2.At this point, the machine will run automatically for a while. Wait a little longer for the sound to stop, and then press the "Power" button. At this point, the machine will automatically run for a while and shut down. At this point, the paper in the back card slot will go in a little.

3.At this time, remember to close the front output paper pallet and turn on the machine. The display shows "1", followed by "e" and "5".

Then the paper will go in, but because the front output card is closed, the display will continue to show "e" and "3". At this time, open the front output paper plate, and the paper will continue to come out. Once the paper comes out, the display will appear "1" and hold.

4.At this point, it can be printed normally.

5.When you turn it on later, "e" and "5" will still appear. So every time you turn on the machine, you have to repeat 1 4 steps to use it normally. Of course, the best thing to do is to buy a new cartridge.

The garbage Canon mp198 used for more than half a month to show that the ink collector was full, and the small screen showed an e8 warning, and the kind maintenance personnel gave me a clearing software, thank you! At present, the Canon MP198 machine cannot be cleared and cannot be cracked