Does anyone know how to zero the Canon MP145 printer cartridge?

1. In the shutdown state, press and hold the "Stop Reset" button, and then press "Power" to turn it on.

It is to press "Stop Reset" first, and then press "Power", and both buttons are pressed at the same time. ）

2. Keep the "Power" button unloose, release the "Stop Reset" button, and then press the "Stop Reset" button twice.

Press the first "Stop Reset" and the warning indicator will turn on, and the second "Stop Reset" will turn off the warning light. (This is the maintenance mode).

3. Release the power button, and the printer starts to start. (The previous power button was not released);

4. Wait until the printer stops working and the LCD displays "0", then press the "Stop Reset" button four times.

5. Press the "Power" button twice to save the settings.

Canon. pixma

MP145 cartridge zeroing method.

a. Press the Stop reset button first, and then press the power button to power on.

b. Press the power button and don't let go at the same time, release the stop reset button, and then double-click the stop reset button.

c. Release the power and stop reset keys at the same time, and enter the maintenance state at this time.

d. When the power light turns green, press Stop to reset and press 4 times to turn off the warning light.

Then press the Repair button (the leftmost one) and Stop at the same time Reset.

Restart after letting go.

ok！！I experimented with this method myself. I used it, it works!

You can take a closer look downstairs, this is very different from the one in the maintenance manual.

I've done it myself.

Resources.

Does the HP Printer M437N need to be cleared for replacement cartridges? How to replace the toner, please ask after adding the toner, it still shows that the toner is insufficient, and the toner is extremely low, and it cannot be printed.

Does the HP Printer M437N need to be cleared for replacement cartridges? How to replace the toner, please ask after adding the toner, it still shows that the toner is not enough to print is very low, what is the original Hello dear, reason 1: There is a leakage of toner, resulting in the toner detector can not detect the toner, so the printer reminds that the toner is insufficient.

Solution: At this time, it is necessary to check whether the toner cartridge is overwort and the service life has expired? If this happens, it is advisable to replace the toner cartridge.

Usually the chip will estimate how many sheets can be printed according to the initial set counting logic, and record the printing situation, when the chip automatically records a certain number, it will send a prompt for the user to replace, which does not necessarily mean that your toner is used up. I just finished adding toner, why does the printer prompt that the toner is insufficient? Two reasons are critical for the chip count to be full, causing problems to note:

Since most of the ink cartridges and chips are currently used for the second time, it is possible that users have just arrived at a new one, but the chip inside has recorded a certain number of prints, which is normal. Solution: At present, many machines are supporting the operation of clearing the number of chip records, if you encounter a printer prompting toner, toner is insufficient, do not rush to replace a new ink cartridge or add toner, you may wish to continue to print a few more sheets, to judge whether it is a problem with chip counting!

I just finished adding toner, why does the printer prompt that the toner is insufficient? Two reasons are very critical printer knowledge, if the next time the printer reminds the toner and the toner is insufficient, remember to check it carefully first, don't be in a hurry to spend money in vain! Hope it helps.

The specific operation method of Canon printer clearing is as follows; 1.Turn off the power of the printer and load 3 sheets of A4 paper on the printer before the zeroing operation.

2.First press and hold the "Stop Reset" key, and then press the power button to power on (don't let go). While pressing the power button without letting go, release the "Stop Reset" button (the power button is still held down at this time).

Then press the "Stop Reset" button 5 times, and press and hold it for the last time. (At this time, the power button and the "Stop Reset" button are both in the state of holding down).; 3.

Release the power button and the "Stop Reset" button at the same time, and the printer will be displayed as when the printer is up and running"0", that is, to enter the printer repair mode.; 4.The computer prompts you to find new hardware and prompts you to install the driver, leave it alone, if you don't find new hardware, it is recommended to restart the computer or replace the computer.

If the computer can't find the new hardware, the zeroing software is unusable) Click "Install drivers". 5.Use the clearing software to clear the device, and first turn off the antivirus software of the machine.

6.Open the software and select accept. 7.

Select the printer and select the perticular adjustment mode. 8.When you're done, click "OK" to turn off the printer and turn it on.

Clearance is complete.

Summary. Hello, I'm glad to help you answer - normal zero, just turn off the power of the printer and unplug the printer power cord and data cable. Press the power button and plug in the power supply, and the electromechanical power light will be on.

Then press and hold the feed button while pressing the power button. Release the power and the power light will turn off when the printer starts. Reboot the machine, and then connect the computer after the machine is running normally, and that's it.

Hope it helps, dear].

Does the HP Printer M437N need to be cleared for replacement cartridges? How to change the toner After adding the toner, it still shows that the toner is insufficient, and it is extremely low and cannot be printed.

Hello, we are inquiring about the relevant information and will reply to you immediately!

Hello, I am honored to help you answer - normal zero, just turn off the power of the printer and unplug the printer power cord and data cable. Press the power button and plug in the power supply, and the electromechanical power light will turn on. Then Minglvkuan pressed the power button while holding down the paper feed button.

Release the power and the power light will turn off when the printer starts. Reboot the machine, and then connect the computer after the machine is running normally, and that's it. Hope it helps, dear].

Hello, if you are satisfied, please use your noble hands to point a [Yinyin Praise], your little Bo's move is very important to us, please raise your noble hand, to add a momentum, thank you.

The method of clearing is as follows:

1. Open the front cover of the printer and take out the drum holder and ink cartridge.

2. Take out the ink cartridge again and separate it from the drum holder.

3. Find a suitable tool to pry open the plastic cover of the powder filling mouth, pour out the residual powder, and be careful not to use too much force to avoid damaging the machine.

4. Take out the new toner, open the cap and introduce the toner into the cartridge.

5. After the above is completed, it should be covered with a plastic cover, and it is necessary to check whether it is covered many times.

6. Wipe off the powder on the outside of the ink cartridge and put it back into the drum holder.

7. Finally, it is a reset, and the drum holder can be put back into the printer.

1. Turn on the life counter of the clear toner drum Open the front cover Press the "Clear Return" button on the panel, and the screen will display "Replace the toner cartridge?" Yes No" Press the "+" key, the screen shows "Accepted" Press "Confirm" to close the front cover. 2. Turn on the powder balance counter after adding powder to the clear cartridge Open the front cover Press the "Clear" button on the panel Press the "Start" button Press the "+" button 11 times, the screen displays "11" Press "Confirm" Press "Start" Close the front cover.

The ink cartridge of the Canon 1180 printer is cleared as follows:

Power off the printer.

Please check the picture by yourself.

and unplug the power cord from the power outlet.

Press the power button of the printer tightly and plug in the power cord at the same time.

Without releasing the power button, press the feed button 2 times. Power light display.

The first time is yellow, the second time is green, then release the power button, and you can print.

If this situation still occurs after shutting down and turning on the computer, follow the steps above to do it again.

A printer is one of the output devices of a computer that is used to print the results of computer processing on a related medium. There are three indicators to measure the quality of a printer, print resolution, print speed, and noise. There are many types of printers, and they are divided into percussive printers and non-percussive printers according to whether the printing element has a striking action on the paper.

According to the structure of printed characters, it is divided into full-character printers and dot matrix character printers.