Who has Canon LBP 1820 Printer Manual 10

1. Click on the printer and fax machine, find the 1820 driver, right-click, Properties, Printing Preferences, press the tai key on the computer keyboard 12 times, click the mouse, and then the paper custom window appears, name the paper, enter the paper size, click, click OK, and select this custom size when printing the paper on the page.

There are four screws on the top cover, and you remove the old row, and you have a dirty laser, and you open it to wipe the old row.

1. Ask for the IP of the network printer 2. Set the IP of your computer according to the IP of the network printer 3. Search for the network printer with your computer 4. After discovering the network printer, set it as the default printer.

A factory reset is also known as a reset of the initial settings.

1.Press menu

2.Use the left and right arrow keys to select the wrench, hammer icon, symbol 3Use the up and down arrow keys to select 'Reset All'

4.Press the Func Set button.

Note that the initial settings cannot be set when the camera is connected to a computer or printer.

Does this work downstairs too? What I found in the official information is that when you press and hold the left and right buttons at the same time to turn on the computer, it will display "nvram" and then release it, which is a successful recovery, and it has become Japanese.

Try the following method and see if it works.

Press and hold the recovery button and the power button to power on, and the green light will be on. While holding down the power button, release the recovery button, then press the recovery button 2 times, and then release the power button. After the green light is on, press and hold the power button, press the recovery button 4 times, then release the power button, then press the power button, then press the recovery button 1 time, and then press the power button 1 time to print the factory test page.

Press and hold the big round key on the left.,Then turn it on.,Just release it after turning it on.,But then you have to adjust the network card IP.,And it will change Japanese.,Oh,I hope it helps you.。

Find the corresponding paper shape in the printer properties, or define the size of the paper yourself. That's it.

Chinese-English dictionary

It's all in English.,,There's no need to tune him to be able to print it.。。

Right-click in the printer folder --- properties. You can set it in the port settings.

If the printer itself has a network, you don't need to set an IP address, plug in the network cable, and you can connect to it. Just install the driver,

How do I set up network printing with Canon LBP series network printers?