How to solve the problem of tile grinding?

How to deal with tile grinding? There are two types of tile scratches, one is tile scratches, the surface structure of the tiles is not damaged, and there are no traces on the surface of the floor after cleaning. The other is the metal scratches of the floor tiles, such as using iron nails or sharp iron tools to cut the brick surface, forming scratches that damage the brick surface.

1.Repair of scratches on floor tiles.

Use the floor tile repair agent to repair the tile scratches, use a brush dipped in the repair agent to draw in the scratch gaps, paint again after 30 minutes, and repeat again after drying, until the scratches are reflective from the side, so that the floor tile scratches can be kept clean for a long time after treatment; In addition, scratches that deeply scratch the brick surface can also be polished with a water mill, but be careful to grind and polish, otherwise there will be pits or greater damage to the brick surface, such as matte, wider scratches.

2.Treatment of metal scratches on floor tiles.

What should I do if I push and pull the iron frame or aluminum alloy on the floor tiles during decoration, and the floor tiles have scratches? The focus point of metal push and pull is small, the pressure is large, and the traces of metal can penetrate into the inside of the brick surface, which is more difficult to clean, and the surface is easy to damage with acid, if it is a scratch caused by heavy metal push and pull, it will be more difficult to remove the scratches on the floor tiles, in order to remove the metal scratches on the floor more labor-saving and faster, you can soak it with detergent for 3 minutes and then scrub it, the floor tile cleaner will become loose after the reaction and decomposition of the metal scratches, wipe it with a wet towel dipped in the detergent a little harder, and the clean brick surface will be displayed immediately, It will not affect the surface of the floor tiles, and there will be no change in gloss.

You can buy that kind of special wax for cars to apply to the surface, and then wipe it repeatedly with a towel, it will have a certain effect.

The inner one must not be repaired, the decoration can be used to glue the newspaper to protect the tile, the general decoration bucket is tender, convenient and affordable!

No, you don't have a lot of bricks, you can use it on the side of the furniture or other places you can't see, I hope mine is useful to you.

If your floor tiles are high-density full-body tiles vitrified tiles, soak them in the thinner of the paint for a while, and then slowly use a clean towel to remove them.

On the contrary, those bricks with relatively low density are easy to absorb color, that is, the color is sucked in, which is more troublesome. Do not use 5% oxalic acid solution for a while, and then try it with a sassafras cloth that does not fade, you can also use stain removal powder, tile stain remover, etc., but the principle is more or less similar (containing weak acid ingredients).

Tile glaze grinding repair method

1. Clean the surface of the tile, and it is best to rinse it with high-pressure water.

2. For local damaged parts, they should be repaired and repaired first.

3. Use an electric grinding wheel to grind the surface of the tile slightly to increase the roughness.

4. Use special ceramic tile glaze repair agent or new elastic putty and other materials to scrape the parts of the tile gaps in batches and scrape the brick joints in several ways. If necessary, according to the adhesion between the tile and the base layer, add alkali-resistant glass fiber mesh composite tile renovation putty to scrape and apply it to the old tile surface.

Methods of care and maintenance of tiles

1. When laying floor tiles, be sure to let the construction personnel reserve a certain gap between each floor tile. If you do not reserve a gap, it is easy to lead to the hollowing of the floor tiles in the later stage.

2. After the floor tiles are laid, they generally need to be placed for about three days. During these three days, do not step on the floor tiles, otherwise it is easy to cause the floor tiles to loosen.

3. In daily life, stains such as juice and oil stains are easy to accumulate on the surface of floor tiles. If you want to clean these stains, you should wipe the surface of the floor tiles with a neutral detergent, not acidic or alkaline detergents, otherwise it is easy to cause damage to the surface of the floor tiles.

It is common for floor tiles to be scratched, and it is uncomfortable for cleanliness owners to look at it, so what should I do? In addition to being unsightly, if it comes down for a long time, it will also affect the stability of other floor tiles. If it is dealt with in a timely manner, how to deal with it better?

Let's take a look at what the gold medal foreman of the clever decoration family has to say about this problem?

If the floor tiles are scratched, if it is a small area of shallow marks, it is effective to apply toothpaste directly to the surface. If the traces are relatively deep, repair the tile scratches with the floor tile repair agent, use a brush dipped in the repair agent to draw in the scratch gaps, paint again after half an hour after drying, and finally repeat again until the scratches are reflective from the side, so that the floor tile scratches can be kept clean for a long time after treatment. In addition, the scratches that deeply scratch the brick surface can also be polished with a water mill, but be careful to grind and polish, otherwise there will be larger marks and even damage to the surface of the floor tiles.

If it is a scratch caused by heavy metal appliances, it will be more difficult to remove the scratches on the floor tiles, in order to remove the metal scratches on the floor more easily and quickly, you can soak it with a detergent for 3 minutes before scrubbing. The floor tile cleaner will become loose after reacting with the metal scratches, and when you wipe them with a wet towel dipped in the cleaner a little harder, the scratches will disappear immediately, and they will not affect the surface of the floor tiles, and they are still so glossy.

If the ground is made of small scratches of uranium bricks (crystal bricks, antique bricks), it is directly painted with cement of similar color, and there will be no flaws to see after a long time, so there is no need to make a big deal and use those complicated methods to deal with it. If the polished tiles are brighter, you can buy some filling sodium (a chemical thing specially used to repair defects) to make up for it, and it is recommended not to replace it, because the cutting machine used in the replacement may damage other bricks, and it will have to be replaced at that time.

Summary. Ceramic tiles used for half a year glaze on the grinding is a quality problem, but naturally it also has a lot to do with your usual use, first of all, there is usually wear, whether the land is mopping or something, if you use it normally.

The ceramic tile has been glazed for half a year, and the glaze is a quality problem, but naturally it has a lot to do with the usual use of the boring calendar, first of all, there is usually wear and tear, and the land is not mopping or something, if you use it normally.

That is, the quality of the tiles is not very good.

In this case, if you sue for compensation, how should you compensate?

Suing is not necessarily useful, because you have been using this thing for half a year, you can go to negotiate and see.

Can I give you a refund of some of the money?

Negotiation is not the top.

The promise of compensation is not fulfilled.

That can only be the above, but the probability of victory is not very high.

Promised to compensate, and then did not fulfill.

So you were speaking at the time.

The mayor ** complained, and then people contacted him.

Then if you don't contact the market again in this situation, if it's a lawsuit or something, you will lose a lot.

The mayor has no choice, let me fight a lawsuit.

Let you go to court, this chance of winning is not very good.

You'd better think about it carefully.

Can you only consider yourself unlucky, and there is no way to do it?

It's too bad for this business, this kind of can only be negotiated, see if it is willing to pay less, or you will see if there is a way to make trouble.

But he was in front of his shop. Arrive.

First of all, the surface of the repaired tile should be cleaned, stains, dust, etc. should be cleaned up, and then repaired.

The first step is to clean the surface

Clean the floating layer on the surface of the brick, if conditions permit, it is best to wash it with high-pressure water.

The second step is to fix it

For the local damaged part, to repair and repair, the surface of the tile should be slightly ground with an electric grinding wheel to increase the roughness.

If the brick surface is cracked or uneven and needs to be replaced, the replacement brick body should be carefully broken, and then pry around the brick, remove the brick that needs to be replaced, and repair it again.

Methods of daily protection of tiles

1. Anti-cracking

In daily use, do not use metal sharps, glass ceramics, iron nails and other hard objects to knock or rub the ground, and do not drag heavy items back and forth on the ground to avoid scratching the glaze and affecting the appearance.

2. Anti-scratch

If there is a slight scratch treatment, apply toothpaste around the scratch, wipe it repeatedly with a soft and clean dry cloth, then apply a small amount of floor wax, and wipe it with a clean cloth after drying to achieve a shiny and new effect. If the damage is severe, it should be replaced in time or repaired by professionals.

3. Anti-moisture

It is best to open the doors and windows immediately after cleaning to allow air circulation and dry the moisture on the tile wall. In the humid weather in summer, you can wipe it again with a dry cloth, and then turn on the air conditioner to dehumidify.

4. Anti-stain

For general stains, you can use a soft dry rag to deal with them, and if you encounter a stain that must be cleaned with water, it is recommended to use a rag that has been soaked and wrung out until it does not drip water.

5. Anti-mold

The gaps between the porcelain tiles can be cleaned with stain remover from time to time, and then a layer of waterproofing agent can be brushed on the gaps with a brush to prevent mold growth.

Summary. Hello dear, if the brick is grinded, you can try the following methods to repair it:1 Use brick grinding repair agent:

There are some repair agents on the market that are specially used to repair brick wear, and you can choose to buy and use them. When using, you need to follow the requirements of the instructions, usually you need to apply the repair agent to the brick surface, and then sandpaper to smooth it. 2 Use sandpaper to sand:

If the brick grinding is not very severe, sandpaper can be used for sanding. Start by sanding with coarse sandpaper, then gradually use fine sandpaper until the brick surface is flat and smooth. 3 Replace the bricks:

If the brick grinding is more serious and cannot be repaired by repair agent or sanding, you can consider replacing the brick. It should be noted that the replacement of bricks needs to ensure the consistency of the color, size, texture and other aspects of the new and old bricks, otherwise the overall appearance will be affected. In short, repairing brick grinding needs to be selected on a case-by-case basis, if you are not sure how to operate, it is recommended that you consult a professional bricklayer or renovation company.

** How to solve.

Hello dear, if the brick is broken, you can try the following methods to repair it: 1 Use brick grinding repair agent: There are some repair agents on the market that are specially used to repair brick grinding flowers, and you can choose to buy and use them.

When using, you need to follow the requirements of the instructions, usually you need to apply the repair agent to the brick surface, and then sandpaper to smooth it. 2 Use sandpaper for sanding: If the brick grinding is not very serious, you can use sandpaper for sanding.

Start by sanding with coarse sandpaper, then gradually use fine sandpaper until the brick surface is flat and smooth. 3 Replace the bricks: If the brick grinding is more serious and cannot be repaired by repair agent or sanding, you can consider replacing the bricks.

It should be noted that the replacement of bricks needs to ensure the consistency of the color, size, texture and other aspects of the new and old bricks, otherwise the overall appearance will be affected. In short, repairing brick grinding needs to be selected on a case-by-case basis, if you are not sure how to operate, it is recommended that you consult a professional bricklayer or renovation company.

It's a bit of a muddy feeling.

If your brick feels a little muddy, it may be because of dust or dirt on the surface, or because there are some tiny bumps in the surface. You can use water and soap or a professional brick cleaner to clean the brick surface, then gently wipe it with a soft cloth or sponge to remove dirt and dust from the surface. If there are some small unevenness in the brick surface, you can use sandpaper or a brick mill to polish it to make the brick surface smooth and smooth.

It should be noted that it is necessary to pay attention to safety when grinding to avoid damaging the brick surface or your own safety. If you are not sure how to do this, it is recommended that you consult a professional bricklayer or renovation company.

If the surface of the tile is abrasive, the following methods can be considered for repair:1Use a tile sander and sandpaper:

Place sandpaper on the sander and sand the tile surface little by little until the polished area flattens. Pay attention to wear protective equipment during operation to avoid inhaling dust. 2.

Use polish: Buy a polish suitable for the tile and follow the instructions for it. Polishing is usually applied to the abrasive area of the tile and then polished with a polisher.

3.Replace the tiles: If the grinding is too severe, replacing the tiles directly may be a better option.

Make sure the new tile matches the original tile size and color. If you're not sure if you'll be able to complete the replacement, it's best to have a professional do it. Regardless of which restoration method is used, it is necessary to operate with caution to avoid secondary damage to the tile.

If your bricks are worn out, you can consider the following solutions:1Use brick surface repair agent:

This restorative can fill in the defects and cracks in the brick surface, making it look more flat and beautiful. 2.Replacement bricks:

If the bricks are worn excessively, they need to be replaced to restore the overall aesthetics of the brick wall. 3.Brick wall renovation:

If the brick wall as a whole is severely worn, consider completely renovating it, repainting it or replacing it with new bricks to achieve an aesthetic and protective effect. Either way, the brick face needs to be thoroughly cleaned before dealing with the brick wall problem to ensure that the repair agent or new brick will adhere firmly.