How to put the skirt zipper back up, and how to install the zipper that has fallen?

Observe whether the zipper puller is good, if it is good, you can install it from the place where the zipper chain begins, if not, go to the place where you repair the clothes to find a master to help. Hope.

Find a professional to replace a zipper, you can also use pliers to gently remove the small metal buckle at one end of the zipper, and then put the zipper back, and then fix the metal buckle with pliers again.

Put the zipper lock on the head first, take the sharp mouthpiece lead, clip the left side, and then clip the right one, and it's repaired.

It's just that if you look at your zipper, there will be a problem, so first solve the problem from his roots.

Get a new zipper.

Preparation materials Tools: forks, zip clasps, clothes.

1. Place the zipper buckle on top of the fork and place it in the middle of the fork.

2. Fix the zipper buckle in the middle of the fork, and pay attention to the front and back of the fixation.

3. Bring the clothes with the zipper off and insert the zipper buckle into both ends.

4. After putting it on, pull it down, pay attention to the reverse of the clothes here, pull the inner one, and turn the clothes back after pulling.

5. Finally, it was restored.

So how do you put it on, there are many skirts that have zippers on the side, and you can pull them open. It's not that you're wearing a little thin, so you can't drag it out.

One, unzip it.

Second, cross your hands and pull the left and right corners of the hem of your clothes up, just like you used to take off your pullover.

Skirt zipper in**, many people will find that the skirt has a zipper when buying a skirt, but the zipper of some skirts can not be found in**, so you can only look at the skirt but can't wear it, let me take you to briefly understand the general skirt zipper is in**.

The zipper is usually at the back or on the side.

Generally look at the style of the zipper to determine the position, the zipper is covered with a piece of cloth in the front, the narrow and thin zipper buried in the fabric is on the right side, and the more obvious zipper is in the back.

The two sewn threads on the front of the skirt should be a problem with the style of the skirt, if it is particularly obvious, it may be damaged before the merchant sells it, and it has been repaired a second time. Normal dress dresses have a stitch, but it is not too obvious. You can put the zipper of the skirt on the right side of the waist and see if the stitching is normal.

If it is still not suitable, it is recommended to find a merchant for exchange.

Use a lighter to burn the detached end of the cloth to prevent it from falling off, and place the zipper on the table with the level facing up. Pull the zipper head into the teeth with the teeth facing up, and pull both ends of the cloth belt together and pull it outward. The zipper head will follow the outward tension of the cloth belt into the teeth, and the slider will be installed after the cloth belt is pulled out, and the excess teeth will be pulled out with oblique nose pliers, not too hard, so as not to break the cloth strip, and install the lower teeth to prevent the zipper from sliding out.

Use a lighter to burn the detached end of the cloth to prevent it from falling off, and place the zipper on the table with the level up.

Pull the zipper head into the teeth with the teeth facing up, and pull both ends of the cloth belt together and pull it outward.

The zipper head will go down the tension of the cloth belt to the outside into the teeth, and the slider will be installed after the cloth belt is pulled out, pull out the excess teeth with oblique nose pliers, do not use too much force, so as not to break the cloth strip, install the lower teeth to prevent the zipper from sliding out.

When using it at ordinary times, if the zipper is loose and the teeth are missing, you can use a small hammer to gently knock a few times on the zipper head to make the upper and lower chain teeth bite tighter, and the teeth will not be removed again.