Many people say that particle board is the worst board, but why is that?

Solid wood particle board.

It is made of compressed particles, the density is not high enough, such as swing doors, long-term switching, its main raw materials are fine-diameter logs, such as small branches, scraps after log cutting, wood shaving, felling, sawing residues. The fundamental reason is that raw materials are easy to obtain, low cost, and easy to accept by the public, which is also its advantage, and the advantages are not easy to deform, good nail holding force, thick texture, particle board is made of high-pressure pressing, and the growth is not better than that of ecological board.

Difference. Many customers are worried about particle board making tatami mats.

The load-bearing is not good, like Oppai.

Sophia, Shangpin Home Delivery and other big brands basically use particle board to make boards!

<> big brands of multi-purpose particle boards are because the quality can be guaranteed, the production process is the most mature, and the product compliance rate is controllable. The granular material is pressed at high temperature, also called particleboard.

The main raw materials come from thin-diameter logs, such as some small branches, some logs from processing, and sawn residues. The advantages of particle board are easy processing, high stability, not easy to deform and crack, and at the same time, it is relatively affordable. Judging the type of plate only by the type of plate cannot judge the quality of the board at all, and the amount of glue used in particle board is higher than that of multilayer board.

Too much, that's not right. The multi-layer board is made of layers of wood veneer sizing and pressurization, and the amount of glue is not less than that of particle board.

The advantage of particle board is that it is not easy to deform and has good stability. It is also suitable for large-area market production, can make a variety of panel furniture, widely used, the disadvantage is that the waterproofness and nail holding force are poor. In fact, this is a misunderstanding.

Particle board is not an ordinary small factory, small workshop can produce and process, the same in line with the national standard of all kinds of man-made boards.

If you use a low-grade particle board the taste is very heavy, it is difficult to disperse, even if there are many big brands of particle board taste is also very heavy, but it will reach a little standard grade, and on the other hand, the particle board has relatively good attributes in terms of anti-deformation and structural stability, and stable quality means that it can reduce a certain amount of after-sales work. The surface of the particle board is smoother, and the veneer paper is more beautiful after being pressed and pasted.

1. The amount of glue used in particle board is relatively large compared with ecological board and multi-layer board, and less than that of MDF. 2. The cost of formaldehyde-free glue is high, so generally speaking, particle board manufacturers will not use formaldehyde-free glue, and basically will use low-cost urea-formaldehyde glue, which contains a lot of formaldehyde. 3. There are doubts about raw materials, and some companies will pass off some discarded wooden residues or other inferior materials for the sake of production costs and other factors, so the produced particle boards are lacking in quality and environmental protection.

Particle board, also known as particleboard, is made of wood or other wood fibers, which are hot-pressed with adhesive. The particle board has stable performance, strong nail grip and high cost performance. It is one of the plates used in a large number of major wardrobe cabinet manufacturers.

The disadvantage is that the lateral bearing capacity is relatively poor, so the lateral span should not be too large when making a wardrobe. Particle board cannot be shaped, so most of it is used on cabinets.

Particle board is cheap and of poor quality, and it will crack after half a year of regular use, so it is called the worst board.

Solid wood particle board.

Strictly speaking, it is a relatively "low-grade" material, although it has the word "solid wood", but it is not a pure solid wood plank.

made of splicing, in fact, it just belongs to the "particleboard."

One of the lowest of all home panels. The advantage of particle board is that it is not easy to deform, especially when making a wardrobe that requires a large size component, the deformation resistance is very important. Regarding edge banding, the edge banding machine must be used, and the edge banding glue should be high viscosity, of course, the edge banding strip is best with a thickness of 1mm, so that the sealing effect is better.

Because solid wood particle board is not easy to deform, it is better than MDF and other wood-based panels in the process of storage, transportation and use.

The nail holding force of a better board is also okay, but because it is a particle inside, relatively speaking, there will be gaps between the particles, the structural force is poor, and the waterproof and moisture-proof effect is also a little worse. Since the raw materials come from miscellaneous wood, discarded wood strips and wood blocks, the natural cost is very low. Although particle board has no nail holding power and durability, it is not as multi-layered as solid wood.

The board is good, but the existence is reasonable, because the particle board is the process characteristics of the wood chips pressed with glue, the deformation resistance of the board is better than that of the multi-layer board.

<> some people may think that the glue used in the production process of particle board is better than that of ecological board.

There are more, so the environmental performance is relatively poor. However, if the quality of the particle board product is not qualified, it will be put into use on the market, and the environmental protection quality of a better particle board can reach the highest, for ordinary consumers who do not know how to do it, the safer choice is to use particle board as a cabinet and high-density board.

It is more appropriate to make a combination of cabinet doors, and the key is to ensure that the material is environmentally friendly, even if it is a big brand, it is necessary to carefully check the relevant inspection certificates.

The density of solid wood particle board is higher, the wood fiber particles in the board are larger, and the essence of natural wood is more retained, and the content of solid wood particle board is generally less than 5% in the use of adhesive, and the environmental protection is better. Therefore, the solid wood particle board itself is reliable, cheap, and suitable for most first-time decoration wardrobes! Generally, when decorating for the second time, solid wood paint-free board with better environmental protection will be chosen.

Particle board is the worst board is a great safety hazard, because its quality is relatively poor, so there will be a lot of problems, especially will often drop things, it may hurt people, not easy to fit.

Particle board is not the worst board, there are worse boards than particle board, particle board also has potential safety hazards, after all, particle board contains a lot of glue, it is impossible to have no safety hazards.

It depends on what it is used for, there are some things that cannot be overused, and potential safety hazards exist at all times, not just plates.

Solid wood particle board is made of compressed particles, the density is not high enough, such as swing door, long-term switching, hinge position is easy to loosen. But balconies; In the kitchen, it is recommended to use solid wood particle board; One should be moisture-proof; One should be guarded against; with solid wood or multi-layered; It's a mistake. Particle board manufacturing process

Use broad-leaved trees or coniferous trees for shavings, and generally coniferous trees are preferred. In order to reduce costs, some plants and dried grass are added to it, which are broken and added to the raw materials. Make granules into homogeneous raw materials.

<> to make wardrobes and furniture, the most important thing is to choose the board, if the board is not environmentally friendly, how to remove formaldehyde in the future is ineffective, so it is particularly important to choose the environmentally friendly board before! How do you look at it and how to choose? The disadvantage is that a large amount of urea-formaldehyde resin glue is used in the production process, and formaldehyde will be released when the temperature reaches more than 25 degrees.

Formaldehyde is excessive, of course, there is a difference between good and bad particle boards, and the formaldehyde content of good particle boards will be much less, but compared with good ecological boards. The particle board has good load-bearing, and the particle board is made of high-pressure pressing, and the growth is not worse than that of the ecological board. Many customers are worried that the load-bearing capacity of particle board is not good for tatami mats, and this worry is unnecessary.

We installed a lot of tatami mats with particle boards, but they have not appeared so far.

Due to the advantages of particle board, it has good operability, which can realize the intelligence of wardrobe processing, reduce the staffing and realize industry. This can greatly increase the competitiveness of enterprises in the market, which is also what I think will be a big brand. You know, whether it's a small processing plant or an on-site worker making a wardrobe, there are two main costs:

Labor and material costs. In addition to labor costs and material costs, brand processing factories also have a lot of additional costs, such as: advertising.

Particle board generally refers to solid wood particle board. Solid wood particle board is made of wood or wooden poles, logs are broken, fine wood fibers are used on both sides, long wood fibers are sandwiched in the middle, and the adhesive is applied under the action of heat and pressure.

That's right, particle board is the weakest of all sheets. Particle board is usually made from some wood chips, so it is longer in length, but it is cheaper.

Particle board is made of solid wood pellet material pressed at high temperature, also known as particle board. Its main raw materials are thin-diameter logs, such as twigs, scraps from log cutting, wood shavings, felling, sawing residues. So it's raw material to come.

There are more sources, and the purchase is relatively low, so the quality of solid wood particle board is also more economical.

Particle board is not the worst board

From the point of view, the particle board is usually lower than the density board, multi-layer plywood (multi-layer solid wood board), large core board, and ecological board. Because its raw materials are relatively cheap.

In terms of raw materials, its raw materials are mainly thin branches, wood shavings, and wood chips, which are waste materials from the wood production process, and are not made of finished wood.

In terms of bearing capacity, it has a certain toughness, and the bearing capacity can also meet the requirements of our daily production of furniture and cabinets.

In terms of durability, it is tough and not easy to crack, and it is not easy to be damp, water and deformed after encapsulation and lamination. But allow.

It is easy to enter water from the position of the edge sealing gap of the plate incision, causing the plate to expand and deform.

In general, the raw materials used in particle board are relatively inferior, but they can also meet the needs of daily decoration and furniture production.

Yes, it has a taste, it has a particularly short period of use, it does not carry weight at all, and it is not much cheaper.

Particleboard, also known as particleboard, is made from wood or other wood fibers that are hot-pressed after an adhesive is added. The particleboard has stable performance, strong fixing force and high cost performance. It is one of the large number of sheets used by wardrobe and cabinet manufacturers.

The disadvantage is that the lateral bearing capacity is relatively weak, and the lateral span cannot be too large when making a wardrobe. Particleboard cannot be modeled, so most of it is used on cabinets.

Medium fiberboard is a density board other than high fiberboard and low fiberboard. Wood or other plant fibers are used as raw materials. Wood-based panels are wood-based panels that are hot-pressed with crushing, fiber separation, drying, urea-formaldehyde resin, or other suitable adhesives.

Due to its excellent performance, it is an effective method for comprehensive utilization and rational use of wood. However, the absorption rate and thickness expansion rate of MDF are higher, and the fixing force is worse than that of MDF. At present, MDF is widely used in office furniture, household cabinets, wardrobe mobile doors, door panels, ordinary molded case doors, etc.

Multi-layer boards are planned to be made of wood blocks, veneer or thin wood with three or more layers of laminated material bonded with adhesives. Odd-numbered layers of veneer are usually used, with the fibers of adjacent veneers bonded perpendicular to each other. Multilayer plywood, also known as plywood, is one of the commonly used furniture materials.

Typically, the crown plywood surface and inner plywood are placed symmetrically on either side of the center or core. Plywood can improve the utilization rate of wood and is the main way to save wood. It's not true that particle plates aren't the worst.

Good particleboard is more expensive than echo board. Of course, every board has its own qualities, for better or for worse. The reason why a lot of customers are so disgusted with party boards is that their understanding of party boards is still a thing of the past.

I think that the strength of the stone slab is not high, it is not friendly to the environment, and the bearing capacity is not good. It swells at the sight of water. Let me tell you why you use particleboard in brand stores.

In the production of plates, as long as the middle and indirect are combined into multi-layer boards, adhesives will be used, and the aging and decomposition of the adhesive will release formaldehyde, which will affect the health of the family. Solid wood particle board breaks up the wood into pellets and then sticks it into an adhesive, which is expected to use more binder and release more formaldehyde. The production of solid wood panels consumes more wood, so it is expensive.

The core in the middle of the solid wood particle board is made of chips bonded together, and the corners of the wood can also be used for production, which is relatively cost-effective. It is common sense for human beings to want to save consumers money, and solid wood particle board is relatively cheap, so many consumers will naturally choose solid wood particle board.

Particle board is made of scraps from other boards that are broken into pellets, and then these particles are bonded together with super glue. This kind of plate is called the worst plate because it is spliced, so the transverse strength is poor, and the smell of glue is very pungent, which is harmful to human health.

Particle board is made of wood chips compression, furniture made of particle board is easy to deform after a long time, and this board is not waterproof, it will be broken when the water is soaked, and it is particularly easy to burst, so people generally do not use this board to make home decoration.

Particle board is broken into particles from the edges and corners of other boards, and then these particles are glued together. Because the particle board contains a large amount of glue, if it is used for decoration, it will release a large amount of formaldehyde and other polluting gases, so it is the worst board.

Particle board is made by compressing wood chips, this kind of board is indeed the worst quality board in decoration, but it is cheap, suitable for low-cost decoration needs.

It is not the worst, the solid wood branches are broken, glued, veneered, edge-banded, or the log can be broken by the whole wood, or the wood chips are directed and hot-pressed, which is the Ousong board. There are also other materials such as straw bonding.