What should I pay attention to in the installation and acceptance of wardrobe customization?

Precautions for the acceptance of custom wardrobes 1: look at the appearance.

Because custom furniture should be harmoniously matched with the colors, textures, patterns, etc. made by other woodworkers, their finishing materials, paint processes, etc. are basically the same. Inspecting the exterior quality of furnishing furniture is similar to inspecting the exterior quality of doors and windows. It mainly depends on whether the surface paint film is smooth and bright, and whether there are quality defects such as falling, bubbles, and wrinkles; It also depends on whether the color difference of the veneer is large, whether the pattern is consistent, whether there are corrosion points, dead joints, breakage, etc.; Whether the edge banding treatment of various wood-based panel parts is tight and straight, whether there is degumming, whether the surface is smooth and flat, and whether there is no bump.

Precautions for the acceptance of custom wardrobes 2: look at the process.

The workmanship of customized furniture is not fine, and it can be observed from the combination part to see the rationality and firmness of the connection points between each component of the furniture. If a piece of furniture is combined, its hardware connectors should be of high quality, and the degree of fitting of the hardware itself determines the overall fit of the furniture. For furniture of the overall structure, each connection point, including the connection points between horizontal and vertical, must be tight, without gaps and cannot be loosened.

Drawers and doors should be opened and closed flexibly and returned correctly. The perimeter of the glass door should be polished neatly, open and close flexibly, without collapse and scratches, the four corners should be symmetrical, and the position of the buckle should be correct. The installation of various plug corners, pressure railings, and slideways should be in the correct position, flat and firm, and flexible in opening.

Precautions for the acceptance of custom wardrobes.

Precautions for the acceptance of custom wardrobes three: look at the size.

Custom-made furniture should not only be beautiful, but more importantly, practical. Whether the dimensions of the furniture are ergonomic.

The principle, whether it meets the specified size, determines whether the custom furniture is convenient to use.

Precautions for the acceptance of custom wardrobes Fourth: look at the structure.

Check whether the structure of the furniture is reasonable, and whether the frame is correct and firm. Gently push the furniture with your hands, if there is a shaking or creaking sound, it is not a strong structure. Check the verticality of the furniture.

When the plane is diagonal.

When the length is greater than 1 meter, the vertical error should be less than millimeter; When it is less than 1 meter, the error should be less than 1 mm. Also check its warpage: when the plane diagonal length is greater than meters, the warpage should be less than 2 mm, and when the diagonal length is less than meters, the warpage should be less than millimeters.

First, look at the appearance of the custom wardrobe.

First of all, we can observe whether the appearance of the custom wardrobe meets the requirements. You can check the color and texture of the overall furniture paint process of the wardrobe to observe whether it is coordinated and smooth, whether the color of the wardrobe exterior paint is too large within the allowable range of color difference, and whether the overall aspect of the accessories is complete. In addition, you can check whether the paint surface is flat, either by looking at the surface of the wardrobe from the side for air bubbles, or by touching the levelness with your hands.

Generally, the surface of the wardrobe is smooth and shiny, and there are no bubbles, drips, wrinkles, etc. In addition, it should also be checked whether the edge of the cabinet has been spliced tightly, whether there is any degumming, that is, whether the edge sealing is complete.

Second, look at the custom wardrobe door panel.

In addition to the cabinet body, the wardrobe door panel also occupies a large area, so it is necessary to check and accept the door panel of the customized wardrobe. During acceptance, it is necessary to pay attention to whether the door panel is installed correspondingly, whether the height is consistent, and whether the gap width is the same from top to bottom when the door panel is closed. In addition, it is necessary to ensure that the door handles of the wardrobe are on the same level.

In the case of a sliding type of door panel, it is also necessary to ensure that the door panel can slide smoothly and that the door panel will not detach from the slide rail during use.

3. Look at the custom wardrobe structure.

During the acceptance process, it is necessary to pay attention to whether the structure of the wardrobe meets the design code standards. Custom wardrobes are generally overall wardrobe style products, which can be described as "pulling a hair and moving the whole body", so its structural rigor is very important, and it is necessary to ensure that the frame installed in the wardrobe is correct and firm enough. This can be done with a gentle push of the hand, and if the wardrobe shakes or makes a creaking sound that clearly indicates looseness, it is not a strong structure.

At the same time, it is necessary to check whether the vertical surface of the wardrobe is 90 degrees perpendicular to the ground, and whether the horizontal plane connecting the ground is flat enough. If there is a structural failure, it is very likely to lead to the wardrobe to collapse or even fall apart.

The main thing is to see if the installation is firm and whether the installation position is in place? Nothing else is anything to pay attention to.

For wardrobe customization, then install the requirements to see if they are installed sturdy and whether there are any mistakes, on the other hand, you also have to see if there are any scratches in the wardrobe, which are within the scope of your inspection.

Summary. Wardrobe acceptance criteria, how custom wardrobes should be accepted.

How good should the gap between the two doors of the wardrobe sliding door be?

Is a 2 cm door crack qualified?

Wait a minute. The gap between the wardrobe doors is generally about 2-3mm.

Not very qualified pro.

So if that's the case, who should I talk to to to solve the problem?

Where did you buy it?

Find a pro-seller. I can go to ** to find the information on this standard of 2 3 cm<> I'll show you.

The merchant feels that there is no problem.

It doesn't affect the use, and basically there is no big problem.

The installation of the custom wardrobe needs to be actually inspected, first of all, the wardrobe must be inspected as a whole, if there are gaps, it must be corrected, and the details are checked again to see if there is damage and wear inside, and then the wardrobe is placed in your own home for actual operation inspection, which is also okay.

Now there are many ways to inspect the wardrobe, and the customized wardrobe itself is very expensive, and the wardrobe you buy must be checked according to the actual inspection method, so as to be able to control the method.

First, the overall inspection.

The overall inspection is very necessary, because the first step of the wardrobe purchased by yourself is to carry out the actual inspection through the appearance, after the inspection, you can check whether the paint is off, and whether it is stable, whether the whole wardrobe can be safely placed on the ground, and secondly, it depends on whether the color of the appearance is the same as the color you bought before, whether there is a different color, and whether it is in line with the initial design plan. <>

Second, the details of the inspection.

After the corresponding overall inspection is completed, it is necessary to carry out a detailed inspection, and the detailed inspection must be checked through all aspects of the interior, such as the gaps in the wardrobe and the color in the wardrobe is not painted, whether the wardrobe meets the standards just designed, and whether there is a peculiar smell inside the wardrobe, whether there is a replacement material, etc., these are details to check that the custom wardrobe is more expensive, if you do not carry out a detailed inspection, take it home and eat it before you find the problem, then regret it. <>

3. Practical inspection.

Of course, after the purchase of their own wardrobe to take home to carry out a detailed inspection, because after taking home the wardrobe placed at home is different, then placed at home after the installation on the wall, then at this time to carry out the actual operation inspection, as long as it is placed on the wall, found that there is no problem, not to mention that there is no wobble and no gap, then it means that the custom wardrobe is very good, if there is a problem with the gap, it can only mean that the custom wardrobe is not done. <>

We can observe whether the appearance of the wardrobe meets the requirements. The color and texture of the overall furniture painting process of the wardrobe can be accepted to see if it is harmonious and smooth, and whether the color deviation of the paint on the exterior of the wardrobe is too large within the allowable color difference. In addition, it is also possible to check whether the paint surface is flat.

This can be done by looking at the surface of the wardrobe from the side for air bubbles, or by touching the levelness with your hands. The paint on the surface of the wardrobe is generally smooth and bright, without bubbles, leakage, wrinkles, etc., and is qualified. In addition, the edges of the wardrobe panels should also be checked for tight splicing and degumming.

We need to check the degree of firmness, we can directly use our hands to knock on the wardrobe, and then we can also check whether the opening of the wardrobe is smooth, and we can also check the quality of the wardrobe, which can be seen from some edges and corners, whether there is cracking or peeling.

It is necessary to pay attention to whether the material is correct, pay attention to the condition of the cabinet, pay attention to the treatment of gaps, pay attention to whether it is firm, and pay attention to the size of the storage space.