How to choose the air conditioning mode to save electricity, dehumidify, refrigerate and set the tem

Select refrigeration, 26 degrees. It is already dehumidified when it is cooled, and if you choose to dehumidify, sometimes the temperature will be low and it will be heated.

26 ° When the machine is turned on and off, it consumes electricity and generally does not consume electricity when it is turned on.

The temperature that you feel right for yourself.

When the air conditioner is in the cooling state at the lowest set temperature, it is actually dehumidifying at the same time, and it consumes electricity if it runs for a long time; When the set temperature of the air conditioner is running in the highest refrigeration state, the running time is shorter, and relatively speaking, it saves electricity in the lowest refrigeration state. Because when the air conditioner is in the dehumidification operation state, the design (default humidity) of the computer board chip of the air conditioner is 60%-65% (suitable humidity for the human body), and when it is lower than this humidity, the air conditioner will stop running, and it will no longer consume electricity. When the refrigeration state is operated at the lowest temperature, it takes a long time for the air conditioner to complete the operation at the set temperature, so the power consumption is large.

On the contrary, when the maximum temperature is set in the refrigeration state of the air conditioner, the air conditioner will reach the maximum setting effect in a short time after operation, and the air conditioning compressor will be shut down, and the power consumption will be less (it will save electricity than in the dehumidification state). In addition, the level of ambient humidity also affects the power consumption of the dehumidification function of the air conditioner. Therefore, it is only a relative concept, and it cannot be too absolute.

To put it simply, refrigeration is to continuously work to the temperature you set - to lower the temperature, and at the same time to continuously dehumidify; Dehumidification can be understood as intermittent refrigeration, and the wind speed is low, so that the moisture in the air is more likely to adhere to the air conditioner evaporator for the purpose of dehumidification, but the cooling is not obvious. When the room is hot and humid, choose refrigeration, and if it is not too hot and humid, use dehumidification.

Air conditioning maintenance. 1. Seasonal maintenance of air conditioners. When the air conditioner is not used for a long time, in order to fully dry the inside of the air conditioner, it should first run in the air supply mode for 4 hours, add some lubricating oil to the fan motor part, then cut off the power supply, and then cover the air conditioner with an envelope, and cover the outdoor body with a protective cover to avoid sun and rain.

At the same time, wipe the remote with a clean, soft, dry cloth and remove the battery. When reusing the air conditioner, it is necessary to do a basic cleaning and do an operation test.

2. In-depth maintenance of air conditioners. Professional and technical personnel are requested to carry out comprehensive and thorough cleaning and maintenance of the core components of the air conditioner from the inside to the outside, so as to find the hidden problems of the air conditioner in time, effectively extend its service life, and be healthier and more energy-saving. The in-depth maintenance of the air conditioner is generally sufficient once every 2-3 years.

Air conditioning dehumidification is more energy-saving, air conditioning dehumidification I turn on 24 degrees, or more useful.

It must be that the energy-saving mode is more energy-efficient, and the energy-saving mode is lightning and also reduces the use of energy. Generally, it is more suitable to open about 26 degrees, and this can also make the surroundings more suitable for survival.

The refrigeration method is familiar to all of us, so what is the dehumidification mode? I believe that many careful people will find that there is a water bead mark on the remote control of the air conditioner, which is the sign of dehumidification mode. Dehumidification is to reduce the humidity of indoor air and vaporize and discharge water vapor in the air.

The biggest benefit of the dehumidification mode is that it keeps the temperature in the room low and smooth. The dry air energy heat pump quickly digests and absorbs the sweat from the body, which in turn makes people feel cool. For the ** air conditioner that needs to set its own dehumidification temperature, there is no special research on this situation in the field at this stage, according to the experience accumulated by the majority of netizens, it is best to set the temperature at 4 degrees lower than the normal temperature.

For example, if the refrigeration temperature is set at 27 degrees, it is best to set the dehumidification temperature to 23 degrees. Long-term use of ** air conditioner dehumidification mode will damage the compressor, generally 1-2 hours at a time.

Dehumidification does not save electricity at all.

In dehumidification mode, the compressor will always be running, except for the sail tease and the air volume is smaller.

In refrigeration mode, as long as the temperature is set reasonably, the compressor will turn and stop from time to time, which will save power.

The air conditioner in the dehumidification mode is more energy-saving than the refrigeration mode, because the compressor is working intermittently, and the general refrigeration set temperature is mostly below 27, when the ambient temperature is higher than 35, the compressor will hardly stop, in the dehumidification mode, the compressor is regularly open and closed state resale, intermittent work, so power saving. Generally speaking, the compressor will not start too often, let alone hold the shaft, and the compressor should be designed to withstand dehumidification conditions.

Air conditioning dehumidification is generally turned on to 23 or 24 degrees. For air conditioners that need to set their own dehumidification temperature, it is best to set the temperature at 4 degrees below room temperature. However, it should be noted that the use of air conditioning dehumidification for a long time will damage the air conditioning compressor, and it is generally enough for 1 2 hours.

If you want to better understand how many degrees the air conditioner is generally turned on for dehumidification, you can continue to look down.

1. Generally speaking, it is best to keep the temperature about 4 degrees lower than room temperature when using air conditioner for dehumidification. For example, if the cooling temperature is set to 27 degrees, then the dehumidification temperature is set to 23 degrees. If you use the air conditioner dehumidification method for a long time, it will damage the air conditioner compressor, and it can be used once every 1-2 hours.

2. The dehumidification mode of air conditioner is based on the principle of independent dehumidification method, which is known as constant infiltration stool temperature air conditioning dehumidification in the industry. The basic principle is to heat the cooled air to the original temperature through the evaporator and then send it into the room, so that the indoor environment remains relatively constant under the condition of reduced humidity.

3. Refrigeration modeThis is the mode of any air conditioner, and it is also the most basic function of air conditioning. The refrigeration process of air conditioning is inevitably accompanied by dehumidification, and the temperature of the humid air drops sharply after passing through the air conditioner evaporator, while the humidity of the air is in a supersaturated state.

4. Generally, when the outdoor temperature is higher than 40 degrees, it is necessary to use ordinary refrigeration operations, only at night when the temperature is relatively low and the humidity is high. Only by turning on the dehumidification mode can the effect of adjusting the room temperature and humidity can be achieved.

The dehumidification mode is more power-efficient than the refrigeration mode based solely on the length of time.

Difference Between Refrigeration and Dehumidification:

The cooling mode of an air conditioner is designed to reduce the temperature of the air while removing water vapor. The dehumidification mode is to remove water vapor for the purpose of reducing the air temperature and selecting the dehumidification mode, and the dehumidification temperature and wind speed can not be adjusted up or down. A comparison of the two principles can find a significant difference, which mode to choose mainly depends on the actual situation in the room, if it is hot but not very humid, use the cooling mode, if it is hot but very humid, use the dehumidification mode.

Nowadays, most of the inverter air conditioners on the market can set a more suitable temperature when we choose the refrigeration mode, so that the air conditioner can be shut down and rest after reaching the temperature.

The principle of dehumidification mode:

The principle of dehumidification is to liquefy the water vapor in the indoor air into condensate and discharge it outside, so as to achieve the purpose of reducing the relative humidity of the room. There is a certain scientific basis for dehumidification and cooling. The body's sweat glands are constantly producing sweat, and the dry air absorbs this sweat quickly, making us feel cool.

Air conditioner dehumidification and refrigeration mode:

When the air conditioner is running in the "dehumidification" mode, the fan of the indoor unit runs very slowly, and the uninterrupted work of the air conditioner compressor controls the ambient humidity at about 60; In "refrigeration" mode, the compressor and hair dryer of the air conditioner will continue to operate until the room temperature reaches the set temperature, which will automatically shut down, which consumes more electricity. In fact, it depends on the environment, turning on the "dehumidification mode" in hot and humid weather can quickly expel the moisture in the air outside. At the same time, the air conditioner will continue to blow cold air to maintain the appropriate indoor temperature, and the compressor and outdoor unit will also stop running appropriately for a period of time, and the working time will become shorter, so the power consumption is low, which is indeed a lot of savings compared to the simple refrigeration mode, if the outdoor temperature is too high, it is suitable for the refrigeration mode.

In addition, we would like to remind everyone that in dehumidification mode, there is no need to turn the temperature of the air conditioner too low. When the temperature is lower than 23, as long as it is lowered by 1, it consumes several times the power.

When the gas lift volt temperature exceeds 30, the power consumption of the answering hand in the dehumidification and refrigeration modes is about the sameWhen the temperature is 20 -30, the dehumidification and cleaning mode saves electricity compared to the refrigeration mode.

Turning on the air conditioner for dehumidification, automatic, and sleep mode is the most energy-efficient. In humid and sultry weather, turn on the refrigeration first, and then change to dehumidification after the room temperature drops.

When the air conditioner is turned on, it is set between 26 and 28 degrees, and turning on the sleep mode is the most energy-saving. In humid and sultry weather, turn on the refrigeration first and wait for the temperature to drop down, and then change to dehumidification, which is the most energy-saving.

It should be the most power-saving to turn on the 24-degree refrigeration mode, if it is the first one, there is actually no difference between open and not open, it is better to have a happy one.

The off mode is the most power-saving, and shaking a fan is both cool and exercised, how good.

The choice of the two modes can be decided according to the indoor temperature, when the air temperature is 20 -30, the dehumidification mode is more energy-efficient than the cooling mode;When the temperature is 30, the electricity consumption for the dehumidification and cooling modes is about the same. Precautions: In humid and low temperature weather, turn on the "dehumidification mode" of the air conditioner, the moisture in the air will be quickly discharged outside, and the air conditioner will continue to blow cold air to keep the indoor temperature appropriate, and the compressor and outdoor unit will stop running for a period of time, which saves some electricity than the simple refrigeration mode.

However, if the outside temperature is very high and the air is very dry, you should use the refrigeration mode, and do not turn on the dehumidification mode for a long time, so as not to damage the compressor. Only at night when the temperature is relatively low and the humidity is high, can the dehumidification mode be turned on in time to achieve the effect of adjusting the temperature and humidity of the room.