What are the differences between polished tiles and glazed tiles? What are the pros and cons?

Full-body bricks, polished bricks and glazed bricks, there are quality differences among them, and there are aesthetic differences, **There are also great differences above, the advantage of full-body bricks is that they are very cheap, and the other two kinds of bricks are more expensive than it, and then the advantage of glazed brick bricks is that the house is the best-looking, and the other two bricks are not as good-looking as him.

The brick surface of the whole brick is relatively bright and non-slip; The surface of the polished tile is relatively smooth and bright, not anti-slip; The glazed tiles are bright in color and are easier to take care of. All-over tiles are generally suitable for living room floors, polished tiles are suitable for walls, and glazed tiles are suitable for kitchen floors.

First of all, the sites for which these bricks are suitable are different, so many of the materials must be different. Polished tiles are stronger and more wear-resistant than the other two tiles and can be used in the kitchen or bathroom. Glazed tiles are more suitable for use on walls.

Therefore, many families can use this kind of brick if they want to cover the wall indoors. The all-over bricks are also very wear-resistant, and most of them are used in the hall or aisle.

Many people have heard of glazed bricks and full-body bricks, but they can't tell the difference between them, and they don't know what the advantages and disadvantages of glazed bricks are.

First, the difference between glazed bricks and full-body bricks.

1. The smoothness is different. The surface of glazed tiles is smooth, and full-body tiles are a major category, including polished tiles and antique tiles, among which antique tiles are generally non-smooth surfaces.

2. The brightness of the surface is different. The surface of the glazed brick is like a glass glaze, while the surface of the whole brick will have some ripples. Therefore, the brightness of glazed bricks will be higher than that of full-body bricks.

3. The color of the tile is different. The color of the brick surface of the whole brick will not have too much color difference, while the glazed brick can be completely integrated into the color of large color difference. Therefore, the color of the whole brick seems to have no change, and the color of the glazed brick is very rich.

4. The cross-section is different. The surface layer of the whole brick has a layer of 3 6mm micronized layer, while the surface of the glazed brick has only one layer of glaze, so it is easy to distinguish from the section.

5. Different sizes. The whole body brick is generally a relatively large size, such as 600600 or 800800. The size of the glazed brick is smaller, only 300300 size.

6. The degree of stain resistance is different. The whole brick is more suitable for places that are easy to get dirty, it can not avoid dirt every day, as long as we wipe the dirty and bad places in the first time, it will not produce stains. The surface of the glazed brick is easy to get into the stain, such as coffee and other things poured on the glazed brick, it is very difficult to clean, so the anti-pollution effect of the whole brick is far more than the glazed brick.

Second, the advantages and disadvantages of glazed bricks.

Advantages: 1. The glazed brick is very transparent and bright, and it is frequently used in the low-rise decoration space of many residential areas, due to the dark light of the low-rise, the decoration user chooses this kind of tile to increase the indoor brightness, and the color of the glazed brick is very realistic.

2. The surface of the glazed brick has been glazed, which is very good in terms of wear resistance. In addition, the stain resistance of glazed bricks is far better than that of polished tiles, and the color and texture are also slightly better, disadvantages:

The glazed surface of the glazed brick is very thick, and it is easy to appear bubbles in high-temperature firing, and the surface glaze is too thin, and it is easy to expose the bottom or deform when polishing. Therefore, when the glazed tiles are mass-produced, the quality cannot be guaranteed, and the number of high-quality tiles is difficult to control.

After the above introduction, we all know what is the difference between glazed bricks and full-body bricks, right? There are both advantages and disadvantages of glazed bricks, and we should choose according to the actual place of use.

The ability to resist pollution is also different. This is also the biggest difference between full-body bricks and polished tiles. Because the surface of the polished brick is polished, it is inevitable to leave some pores when the polishing tile is polished, and if these pores are not well sealed, it will be easy to hide dirt and dirt in the later stage.

** on the difference. We will pay attention to the ** when we buy ceramic tiles, and for the whole body brick and polished brick, the difference in ** is also relatively large. Although sometimes we find that there is a difference between the two, it is not very big.

There is a difference in slip resistance. Because the surface of the polished tile is polished, and after the polishing treatment, it is generally necessary to do antifouling treatment, that is, brush antifouling agent. And these practices increase some materials on the surface of polished tiles, which will lead to a decrease in its anti-slip performance.

After polishing the surface treatment of the brick, its effect is also very good. Therefore, in some places where the requirements are not high, it is very cost-effective to choose polishing.

The quality is different, the production process is different, the effect is different, the decoration process is different, and the ceramic tiles are different. I think polished tiles are better, and this kind of tile has a higher appearance.

The materials are different, the techniques are different, the applicable places are different, the purchase rate is different, and the decoration effect is different; I think polished tiles will make the decoration more perfect.

Summary. Polished brick is a kind of bright brick made by polishing the surface of the whole brick body, which is a kind of whole brick. Compared with full-body bricks, the surface of polished tiles is much smoother.

Full-body brick refers to a low-absorbency tile with the same color on the surface of the embryo body and the brick.

If you talk about the effect, the polished tile effect is good.

What is the difference between full-body bricks and polished tiles, which decorative effect is better between full-body bricks and polished bricks?

Hello, I'll take a look at the situation, please wait a moment.

Polished brick is a kind of bright brick made by polishing the surface of the whole brick body, which is a kind of whole brick. Compared with full-body bricks, the surface of polished tiles is much smoother. Full-body brick refers to a low-absorbency tile with the same color on the surface of the embryo body and the brick.

If you talk about the effect, the polished tile effect is good.