Why are wall tiles more expensive than floor tiles?

Because of the floor tiles. The requirements are usually higher than those of wall tiles. Floor tiles are a kind of floor decoration material, also called floor tiles. It is made of clay. Strong quality, pressure-resistant, wear-resistant and moisture-proof. Some are glazed and have a decorative effect. It is mainly used in public buildings.

and the ground and floor of civil buildings. Wall tiles (wall tiles for short) are made from clay firing. It is suitable for façade decoration of toilets, kitchens, and outdoor balconies.

There is not much difference in nature between floor tiles and wall tiles. If necessary, you can also use wall tiles to lay the floor or floor tiles to the wall. The reason why they are divided into floor tiles and wall tiles is because they have different requirements in use.

For example, floor tiles are often bumped, broken and other easily damaged treatments; Wall tiles are rarely encountered; The decorative surface of the wall tiles makes it easy for people to slip on the ground. In terms of solidity, pressure resistance, wear resistance, moisture resistance, pollution resistance and decorative properties, these floor and wall tiles need to be possessed. Floor tiles pay more attention to solidity, pressure resistance, wear resistance and anti-slip performance; Wall tiles, on the other hand, are more decorative and lightweight.

In fact, floor tiles are more expensive than wall tiles, which is just a general statement. High-quality wall tiles tend to be no cheaper than floor tiles. Don't make everything as expensive as possible, but what's right for you is the best.

In fact, some tiles sell very high, either because the rent in their shop is relatively high, or because the cost of service staff is relatively high. However, consumers generally do not see this situation clearly, and may think that **high is because ***. If it is too high, the average family may not be able to afford it, but it does not need such a high quality.

Therefore, when choosing, you should also choose according to your own situation. And you have to pay attention to compare the differences between stores in different places**. In fact, when choosing ceramic tiles, you must choose environmentally friendly materials.

If the material of the tile is very poor, or it cracks after a period of time, it means that the quality of the tile is not particularly good. And sometimes poor tiles can have a big impact on your health and the health of your family. So when choosing a tile, be sure to look at its material clearly and ask the clerk.

Choose a manufacturer with a guarantee. Although some tiles sell expensive, you may only see the brand in your local area and not in other places. Or there is no relevant information on the Internet, then such a manufacturer may not have after-sales guarantee, so you must pay attention to this issue before purchasing.

Because the cost of wall tiles is very expensive, it is also because it requires a lot of manpower, there are labor costs, and because it is particularly difficult to paste wall tiles, so it will be more expensive than floor tiles.

Because the raw materials of wall tiles are expensive, the use of better raw materials, the hardness of the bricks made is higher, and the surface is very smooth, the cost is relatively high, so it is very expensive.

It is because it takes a long time to make wall tiles, and it is also because it is more fragile, and the cost is relatively high, so it is relatively expensive.

Because the use of floor tiles is usually more demanding than wall tiles, high floor tiles are the decorative material of the floor, also known as floor tiles, baked with clay, strong quality, pressure-resistant, wear-resistant, moisture-proof. Some are glazed and have a decorative effect. Wall tiles that are mostly used in the ground and building surfaces of public buildings and civil buildings fired with clay are referred to as wall tiles, which are suitable for bathrooms, kitchens, outdoor balconies, façade decorative floor tiles and wall and floor tiles, which are not very different in nature.

If desired, you can also use wall tiles to lay the floor and floor tiles to the wall. The reason why it is divided into floor tiles and wall tiles is because the requirements in use are different. For example, floor tiles are often exposed to bumps, crushing and other vulnerable treatment; Wall tiles rarely encounter decorative surfaces of wall tiles and are slippery on the ground.

Therefore, in the characteristics required for the decoration of these floor tiles and wall tiles, such as firmness, pressure-resistance, wear-resistance, moisture-proof, and water resistance, floor tiles pay more attention to firmness, pressure resistance, wear resistance and anti-slip performance; Wall and floor tiles pay more attention to decoration and lightweight, in fact, floor tiles are more expensive than wall tiles, but they are average. The bricks on the wall are often worse than the floor tiles, there are two kinds of wall tiles, exterior wall tiles and interior wall tiles, and the water absorption rate of the inner wall tiles is relatively high. The exterior wall bricks have undergone an acid-base tolerance test, soaked in 10% acid, and cannot be shipped without discoloration into an alkali solution.

If you add bleach to a general swimming pool, the acidity and alkalinity are very low, and it will not corrode the tiles.

Floor tiles are decorative materials for flooring, also known as floor tiles, baked with clay, with various specifications, strong quality, pressure resistance, wear resistance, and moisture resistance. Some after glazing, with decorative effect in layman's terms, wall tiles are tiles for wall decoration, the water absorption rate of wall tiles is higher than that of floor tiles, and the wear resistance is not as good as floor tiles, but its colors are rich, bringing different visual effects to the wall, the production lines of each factory are different, the factory with good ceramic tiles is more advanced, there is a fully automated, modern production line, and the ordinary factory is a semi-automatic production line for workers. The quality of ceramic tiles depends on lean production and control, only advanced production lines can produce first-class products, good equipment and good production lines are the guarantee of good products.

Because the raw materials of this kind of brick are more powerful, the cost is more expensive, and the bricks on the wall are more strong and wear-resistant, more moisture-proof and waterproof, so they are more expensive than floor tiles.

The content is not the same. Moreover, the value of the raw materials in it is also different, and the order of construction is different. And it can withstand pressure and wear, and can be moisture-resistant. That's why it's more expensive.

Wall tiles and floor tiles are not the same type, and the stability of wall tiles is worse, because they are laid on the wall, so it is necessary to choose a strong and durable material. It will be a little higher.

Because the raw material is very high, and it looks very beautiful, it will be more expensive.

Zhaobang 1018 brand ceramic tile purchase knowledge sharing: we often say a sentence when buying things, expensive things are not necessarily good, but cheap things are likely to have problems. It's the same with buying tiles.

Perhaps many people know that there are some problems with tiles that are too cheap, but most people may not know what kind of balance will occur.

In fact, there are various quality problems of too cheap tiles, which can be summarized in five main items:

One is that the flatness is not too good, and when this tile is used for ground or wall paving, it often causes the ground wall to be skewed, uneven.

The second is easy to seepage, because the density and sintering temperature of the tile that are too cheap are not up to standard, resulting in a low overall degree of vitrification of the tile, and the surface of the tile is prone to seepage.

Third, there is a serious color difference, and the classification requirements for too cheap tiles are not strict on the product size and color number, resulting in color difference. Paving tiles with color difference to the home, the overall effect is bound to be a disaster.

Fourth, wear-resistant, anti-slip and other performance is not up to standard, too cheap ceramic tile product design defects, most of the shoddy manufacturing without specific standards, its anti-slip, wear-resistant, water absorption and other basic properties are often not up to standard.

Fifth, there is no service and no guarantee, and the overly cheap ceramic tile sliding products are mostly from informal manufacturers, and they are often missing the link of providing guarantee and service support.

Because the use of floor tiles is usually more demanding than wall tiles.

Floor tiles are a kind of floor decoration material, also called floor tiles. It is made of clay firing. Hard, pressure-resistant, wear-resistant, moisture-proof. Some are glazed and have a decorative effect. It is mostly used for the ground and floor of public buildings and civil buildings.

Wall tiles (referred to as wall tiles) are made of clay. It is suitable for façade decoration of toilets, kitchens, and outdoor balconies.

There is not much difference in nature between floor tiles and wall tiles. If necessary, it is also possible to use wall tiles or floor tiles to cover the walls. The reason why it is divided into floor tiles and wall tiles is because the requirements in use are different.

For example, floor tiles are often bumped, crushed, and easily damaged; Wall tiles, on the other hand, are rarely encountered; And the decorative surface of the wall tiles can easily make people slip on the ground.

Therefore, in solidity, pressure resistance, wear resistance, moisture resistance (water), stain resistance, decoration, these floor tiles and wall tiles need to have the characteristics. Floor tiles pay more attention to solidity, pressure resistance, wear resistance and anti-slip performance; The wall tiles pay more attention to decoration and lightweight.

In fact, floor tiles are more expensive than wall tiles, and only in general. Good wall tiles are often no cheaper than floor tiles.

The thickness of general floor tiles is larger than that of the same wall tiles, and the density is high, and the surface enamel layer has a high degree of wear resistance. Therefore, floor tiles can be used to stick to the wall, but the wall tiles must not be paved.

Because the density of floor tiles is greater than that of wall tiles. It is more wear-resistant than wall tiles.

Too cheap tiles, there must be a flatness is not good, the use of these flatness is not good for the decoration of the house, the house as a whole is difficult to produce the effect, with such tiles paved on the ground or wall, often uneven phenomenon.

Too cheap ceramic tiles, there is a situation that the surface of the tile is easy to seepage, because too cheap tiles often the density of the tile body and the sintering temperature and other aspects are not enough, the density of the green body and the sintering problem is not enough to directly lead to the overall vitrification degree of the tile is low, and finally, the surface of such a tile is paved and applied in the future.

Too cheap tiles, before the product leaves the factory, most of them have not passed too strict product color classification, or the product size color number is not strict requirements, so it is easy to have a serious color difference, the use of such ceramic tiles to pave the house, the overall effect is a disaster.

Too cheap tiles, the design of the product itself is flawed, and the budget cost of the product is already greatly discounted, so the surface of the too cheap tile is naturally not very good in wear resistance, let alone up to standard.

There will be quality problems.

There are bubbles and pinholes on the glaze, which affects the appearance; The polished brick with too high water absorption rate is very stained and easy to turn black after a long time; Tiles that are too light in weight are easy to break when pressed and easy to break when laid on the ground. If you have a problem with funds, it is recommended that you choose a brand like Chuangrui Tile, which is a non-main brand of a large factory, this kind of brand is more suitable, and the quality is the same as the main brand of a large factory.

Cheap tiles, first of all, they can't be cleaned after a long time, secondly, they have a taste, and finally they have a bad texture.

The difference between floor tiles is due to the differences in technology, color, brand, service, etc.

How to distinguish the advantages and disadvantages of floor tiles:

1) The dealer should ask for the quality inspection certificate and quality inspection report of the product.

2) Conduct visual inspection on site to observe whether the product has obvious quality defects such as missing sleeves, spots, cracks, shaft bubbles, ripples, etc., and the above defects must not be selected.

3) Listen to the sound: tap with a hard object, the crisper the sound, the higher the degree of porcelainization, the better the quality. You can also use the thumb, index finger and middle finger of the left hand to clip the corner of the tile, hang down easily, and tap the middle and lower part of the tile with the right index finger, such as the sound is clear and pleasant, and the sound is dull and dull.

4) Drip test: water can be dropped on the back of the tile, to see the speed of infiltration after the water spreads, generally speaking, the slower the water absorption, the greater the density of the tile; On the contrary, the faster the water absorption, the sparse density, and its intrinsic quality is superior.

5) Detect by hand. After sandwiching two bricks with fingers, hitting each other, the sound is crisp and loud for qualified products, and the sound is low and dull, and there must be inherent quality defects.

6) Distinguish the color difference: due to the large number of wall tiles purchased at one time, if there is an obvious color difference between multiple packages, the decoration effect will be very affected, and the production of all packages should be affected.

Sampling and comparison of products, observe the change of color difference, and the color difference cannot be selected.

7) Size: The higher the accuracy of the side length of the tile, the better the effect after paving, and it is not only easy to buy high-quality tiles, but also to save man-hours and accessories. Measure each piece with a tape measure.

Whether there is a difference in the size of the tile, the size error is greater than the millimeter, and the flatness is greater than the millimeter, which will not only increase the difficulty of construction, but also the effect after decoration is poor, and can not be used for the project.

In this case, two aspects should be considered, 1. Whether the production process is consistent, such as one is textured on the surface, and the texture on the other surface is printed. 2. It is necessary to consider whether the façade of the sale is consistent, for example, the price difference between the door surface and the small stall will be much worse.

The situation here is more complicated, but please believe that good bricks are not expensive!