-
The all-over tile produces a water ripple reflection, not that the quality is badIt is normal for water ripples to occur, and it is not a problem with the quality of ceramic tile products, but the water ripple phenomenon and the product production process.
Standards are closely linked. The appearance of water ripples is formed in the process of tile glazing, in the whole glazing process, because the ceramic tile will form a layer of glaze after being glazed in the glazing link, and the glaze on this layer of glaze is a wet glaze layer, and the wet glaze layer has a certain fluidity.
It is because in order to enhance the paste strength of the back of the tile, the manufacturer deliberately designed a lot of similar stiffeners on the back of the tile.
When the tile is sintered and cooled, these bulges will cause the surface of the tile to show irregular deformation, so that the tile reflection is wavy.
Selection of floor tiles
In the actual installation process, a large amount of floor glue will be used, and the role of floor glue is to form a glue film at the junction of the floor plate, effectively locking the free formaldehyde in the floor. Whether the floor adhesive itself is environmentally friendly has become the main indicator for the selection of floor adhesive. High-quality floor glue is expensive, and many small workshop-style businesses often use cheap ordinary glue.
Even the most inexpensive inferior glue, under the guise of "brand exclusive" and "all-inclusive price".
It is logical to enter the consumer's home and bring hidden dangers to environmental protection. In the process of normal use, the free formaldehyde in the substrate is easily released unscrupulously, causing pollution to the indoor air environment.
-
Check the reflection of the object under the light, a good full glazed ceramic tile, the reflection formed by the object through the brick surface is real, straight line image, and the reflection of some poor quality full glaze products will be distorted, and the straight line reflection is bent unevenly.
-
The whole body tile produces a water ripple reflection, is it of bad quality?
Dear, I am happy to serve you, the answer is as follows, water ripple phenomenon, as the name suggests, that is, the surface of the bright glazed tile product presents a phenomenon similar to the water ripple pattern, the appearance of water ripple is buried with the image is normal, not the quality of ceramic tile products, in fact, the water ripple phenomenon is closely related to the product production dust process standards. Why is there water ripple? As we all know, the process of making glazed bricks is very complex and changeable, usually going through many steps, let's talk about a few important steps:
First of all, the press dry presses the bricks, the bricks are transported to the glazing link through the production line pipeline, after the bottom glaze and the top glaze, after the printing process, and finally sent to the kiln for firing, it should be noted that the bright glazed bricks should be added with transparent protective glaze. However, the appearance of water ripples is formed in the process of tile glazing, in the whole glazing process, because the ceramic tile will form a layer of glaze after being glazed in the glazing process, and the glaze on this layer of glaze is a wet glaze layer, and the wet glaze layer has a certain fluidity. In addition, because the conveying pipeline of the production line will produce slight vibration in the process of conveying tiles, the slight vibration will cause fine waves to appear in the wet glaze layer, and finally the wet glaze layer will bend the reed to form water ripples under the principle of waves and gravity.
If the surface of the floor tiles has wavy patterns, it is generally a quality problem, so the surface of the floor tiles is not smooth, in addition, if most of the tiles have such a phenomenon, we can replace the goods, but if there is only an occasional small number of tiles, there is this phenomenon, it can also be used.
-
The whole body tile produces a water ripple reflection, is it of bad quality?
The whole body tile produces a water ripple reflection, is it of bad quality? Kiss! Hello, glad to answer for you.
The water ripple reflection of the whole body tile is not a quality problem, if the tile reflection is wavy, it is generally because the manufacturer in order to enhance the paste strength of the back of the tile, deliberately designed a lot of protrusions similar to stiffeners on the back of the tile, when the tile is sintered and cooled, these protrusions will cause the surface of the tile to show irregular deformation, so that the tile reflection presents a wavy shape. Hope mine can help you! Do you have any other questions?
-
The whole body tile produces a water ripple reflection, is it of bad quality?
Hello kiss, the water ripple reflection of the whole body tile is not necessarily a sign of poor quality, it may be caused by the material, construction environment or equipment problems. Here are the possible reasons for this: Material issues:
If the tile itself has defects, bubbles or uneven fusion, it may cause the tile to be uneven, and then the water ripple reflection. Construction problems: If the tiles are not installed correctly or if an unsuitable construction method is adopted, it may cause the tiles to loosen, tilt or break, which can cause water ripples and slag shadows.
Environmental problems: When installing Sun Pi Xin tiles, if the floor or wall surface is uneven, the uneven surface may cause reflection. Device Issues:
If the tools, equipment, or materials used are not suitable, it can also cause the tile surface to be uneven, resulting in a rippled reflection of water.
-
In order to improve the decorative effect of the interior, in order to facilitate care, many people will choose to pave tiles in the kitchen, bathroom, living room and other areas. Let's take a look.
1. What is the reason for the wavy reflection of the tile.
If the tile reflection is wavy, it is generally because the manufacturer deliberately designed a lot of protrusions similar to stiffeners on the back of the tile in order to enhance the paste strength of the back of the tile, and when the tile is sintered and cooled, these protrusions will cause the surface of the tile to show irregular deformation, so that the tile reflection is wavy.
Second, how to identify the quality of high-glazed floor tiles.
1. Check the clarity of the texture of the brick surface.
We can check in detail whether the surface texture of the high-glazed floor tiles is clear, especially the chaotic socks are areas with varying shades on the surface of the tiles, and it is necessary to carefully check the cluster to see whether the joints are natural and delicate. If it is a high-glazed floor tile with inferior quality, there will generally be a mosaic phenomenon in the position of dark and light colors.
2. Check the reflection of the object under the light.
We can also check the reflection of the object on the tile surface in detail under the light, if it is a high-quality high-glaze floor tile, the object will generally show a real reflection on the tile surface, if it is an inferior high-glazed floor tile, the reflection of the object on the tile surface will generally show a distorted phenomenon.
3. Look at the noise of the brick surface.
We can also turn on the flashlight source on the mobile phone to carefully observe the high-glazed floor tiles to see if there will be a lot of black spots on the surface of the tiles.
The above is a detailed introduction to the reason for the wavy reflection of ceramic tiles and how to identify the quality of high glazed floor tiles, I hope to provide you with some help. It is normal for the tile reflection to be wavy, and it is not a problem of tile quality, so there is no need to worry.
-
Yes, the appearance of water ripples in the tile proves that the water loss rate of the tile is very large, and the reason for the water ripple after the poor quality tile is paved is only:
1. The water absorption rate of ceramic tiles is relatively large, so there will be a corrugated image;
2. The position of the tile with corrugation may often be wet. Try not to touch the water in that place, if after a period of time, there will still be such a phenomenon, it is recommended to replace the brick.
The Douglas tiles I bought at home had a very low water absorption rate before, so this situation did not occur.
The surface of the whole body tile is not glazed, and the material and color of the front and back are the same, and the whole body brick is a wear-resistant brick; >>>More
What is the difference between all-over tiles and polished tiles? Which is better? In the decoration materials market, there are many types of ceramic tiles, among which integral bricks and polished tiles are two types of ceramic tiles, and there are two better ones in the home improvement market. >>>More
At present, there are no real full-body floor tiles on the market. Now the polished bricks on the market are basically the evolution of the previous full-body bricks, because the materials used to make the full-body bricks can not be mixed with kaolin too much, and the cost can not be reduced, so the current polished bricks appeared, the bottom embryo is a relatively cheap material production, accounting for about two-thirds of the thickness of the bricks, and one-third of the fabric. >>>More
I just looked at the second floor, and I still insist that the synthesis of biological macromolecules should be dehydrated, for the following reasons. >>>More
1. Improper construction when paving tiles.
During the decoration construction, people come and go, and all kinds of heavy objects are moved around, which can not avoid collisions. There are several reasons why a tile can be scratched: >>>More