Which color of car film is good to use, which color of car film is good Car film color selection

Updated on Car 2024-07-18
10 answers
  1. Anonymous users2024-02-12

    Hello, Generally speaking, the quality of car film is colorless and high transparency, but the needs of different uses of cars and different car owners make various manufacturers also produce some colored car films, from carbon black, dark gray, olive green to dark natural color, light natural color, etc. Most of the imported high-grade automotive films have more than 10 different models and colors to meet the needs of different users. In fact, the color of the car film does not have much effect on the thermal insulation performance, because the reason why the car film is insulated is mainly to reflect the heat carried by the sun through the thermal barrier layer, so as to prevent the heat from entering the car.

    Many dark car films circulating in the market are of inferior quality, and sellers use dark car films to deceive car owners with good thermal insulation. In addition, when buying car film, clarity is the most important, which is related to the safety of the owner. Since the front windshield is a window to observe the outside world, the clarity of the film is required to be extremely high.

    According to domestic traffic regulations, the light transmittance of the front windshield film should be more than 70%, while many films on the market at present have a light transmittance of only 65%, and some even only 50%. Therefore, for the front windshield film, it must first be clear and safe, and then it is required to have the highest thermal insulation effect on this basis, which is a good solar film.

  2. Anonymous users2024-02-11

    The front windshield must be pasted with a light color, and the side backshield if you want good privacy, stick it darker, and there is no requirement in this regard, and the shallower one is also very good-looking. The main thing is to look at the thermal insulation effect, if the thermal insulation effect is good, the color does not matter.

  3. Anonymous users2024-02-10

    It depends on personal preference. If the owner's body is originally black, white, silver and white, it is recommended that the owner do not paste dazzling color car film, otherwise it will make the car look very "flowery" and lose the original stability and elegance of the car.

    According to China's laws and regulations, the light transmittance of the front glass shall not be less than 70%, and the light transmittance of the "triangular part" of the side window observation rearview mirror shall not be less than 70%. It is only legal to meet this technical standard. Deeper is not better.

    Precautions for car film:

    1. When applying car film, it is necessary to choose a film with good light transmittance, and the scenery to see should be transparent, not dim or deformed. Especially at night, if the light transmission is not strong, the driver's vision at night is not good.

    2. In accordance with the provisions of traffic safety regulations, the light transmittance of the front window film must be greater than 70%, on the premise that it does not affect driving safety. The front window glass is most taboo to paste dark heat insulation film, and safety should be the first priority.

  4. Anonymous users2024-02-09

    According to China's laws and regulations, the light transmittance of the front glass shall not be less than 70%, and the light transmittance of the "triangular part" of the side window observation rearview mirror shall not be less than 70%.

    It is only legal to meet this technical standard. Deeper is not better.

  5. Anonymous users2024-02-08

    There should be many colors of car film, and the red car is best matched with medium black and gray car film; Generally, the medium black film does not affect the line of sight much at night, and there is no need to open small corners on the left and right, such as the one posted by my friend seems to be the black Yu of the United States, or the black of the middle of the universe?? , it's better-looking; Gray lines of sight are better; I feel that the two colors are better.,Mainly depends on what kind of concealment you like, more requirements or better sight requirements.。。。

  6. Anonymous users2024-02-07

    The relationship between the color shade and thermal insulation and UV protection Some people think that light-colored car film can reflect ultraviolet rays. A type of ultraviolet rays - long-wave ultraviolet rays can pass through the dermis of a person, so it is impossible to reflect ultraviolet rays if the color of the film is expected; Can dark-colored car wraps absorb UV rays? Ultraviolet rays cannot be absorbed by ordinary colors, and even the absorbent film is covered on the car body, and the indirect bearer is still the operator in the car, so the color of the film has little to do with heat insulation and anti-ultraviolet function, so there is no need to think too much about the color of the film when choosing the color of the film.

    The thermal insulation and UV protection of the film are mainly determined by the quality of the film. The choice of color of the car film mainly depends on the model and the owner's hobby If your body is originally black, white, silver and white, it is recommended that you do not paste the dazzling color of the car film, which will make your car look very flowery, lose her original stability, elegance, and if you want to give others a rigorous and stable impression, to your car with a more suitable color of the car film is also a way of expression.

  7. Anonymous users2024-02-06

    There are many colors of car film, car film and body color matching is very important, so it is more difficult to choose a suitable color car film, so which color of car film is good, the following will introduce you to the choice of car film color regret car.

    Which color is better for car film

    1. Color selection of automobile front windshield

    The color of the automobile front windshield film is preferentially selected as a light-colored film.

    2. Car side tailgate film selection

    1) If the car is white, you can choose sea green, supernatural color, olive green and other colors.

    2) If the body is pure blue or red, you can choose super natural color.

    3) If the body is black, you can choose olive green, carbon black, dark natural color and other colors.

    4) If the body is silver-gray, you can choose light natural color, super natural color, olive green and other colors.

    5) If the car glass is green, light natural color should be used.

    6) If you pay attention to creating a private space, you can choose carbon black and dark natural color.

    How to choose a car film

    1. Clarity

    The light transmittance of the high-quality film can be as high as 70%, and regardless of the color level, the objects can be clearly seen 6 meters away at night, while the inferior film will have a foggy feeling.

    2. Feel the temperature

    The film of the car needs to have a good thermal insulation rate, the effect of thermal insulation is related to the comfort of passengers and the energy saving of the vehicle, if you are not assured, you can put the car film in the sun, and then paste it on the ** to try the temperature, if the film temperature after sun exposure is not very high, indicating that the thermal insulation rate is not bad.

    3. Touch with your hands

    **The film feels thick and smooth to the touch, while the inferior film feels thin and brittle, and is easy to wrinkle.

    4. Film color

    The pigment of the high-quality film is evenly integrated in the film, which is durable and not easy to change color, while the color of the inferior film is in the adhesive adhesive that acts as a bond, and the color falls off after tearing off the inner lining of the film with a fingernail.

    5. Smell the smell

    The residual solvent of the inferior film adhesive layer has a high content of benzene and a peculiar smell, you can tear off the protective layer of the film, and then smell the glue of the film to see if there is a peculiar smell.

    6. Look at the bubbles

    After tearing off the plastic lining of the car film, when it is re-laminated, the inferior film will blister, while the high-quality film will remain intact after lamination.

    7. Look at the ultraviolet blocking rate

    The car film should choose the ultraviolet anti-drying beam isolation rate is high, this is more important, the sun is very toxic in the summer, the people in the car are very uncomfortable by the sun, with the film film is much better, but some inferior film anti-ultraviolet effect is not good, in order to distinguish the blocking rate of anti-ultraviolet rays, you can put the film under the sun, see whether the film can look directly at the sun, if you can see a few seconds it would be good.

  8. Anonymous users2024-02-05

    1. Before the film, check whether the installation of the window glass is intact and the integrity of the car glass to ensure that the follow-up film work can operate normally. Be sure to cover the necessary parts of the car before applying the film to prevent liquid from penetrating.

    2. Clean the inner and outer surfaces of the windows before the film (focusing on the cleaning of the interior surface and glass sealant area). This is mainly to eliminate the dirt or other objects between the heat insulation film and the window glass after the film, and ensure that the film and the glass can be combined.

    3. Do not raise or lower the window within 3 days after the film.

    4. Do not clean the heat insulation film and turn on the defogging line switch within one week after the film.

    5. Do not use a solution containing alcohol or ammonia to clean the surface of the membrane.

    6. If there are bubbles after the film, you must go to the construction shop within 24 hours for treatment.

    7. Do not let the air conditioner blow against the membrane, so as to avoid violent thermal expansion and contraction.

    Expand this exhibition information:

    1. Professional automotive film should use special film cleaning solution and installation solution, and dilute it with pure water to make the film and glass achieve the maximum bonding strength, without causing the defects of Senzheng code such as warping and delamination, and achieve long-term warranty effect.

    2. After the automotive glass film, there can be no defects and debris particles in the hailstone, so the professional installation must be constructed in the dust-free film room! The clean room is not only a closed glass door isolated from the outside world, but also a water mist sprinkler head and air conditioner to achieve air dust removal, and the ground has a drainage ditch and special paint to further play a role in dust reduction.

  9. Anonymous users2024-02-04

    Many car owners will ask, what color car film is better for the newly bought car? Is the darker the color of the car film, the better? Is it better to keep warm with darker colors?

    Generally speaking, the quality of the car film is colorless and transparent. However, the needs of different vehicles and different car owners make manufacturers produce some color car films, ranging from carbon black, dark gray, olive green to dark natural colors and light natural colors. Most of the imported high-grade automotive films have more than 10 different models and colors to meet the needs of different users.

    In fact, the color and thermal insulation performance of the car film do not have much effect, because the heat insulation of the car film is mainly through the thermal barrier layer to reflect the heat carried by the sun, so as to block the heat from entering the car. Many of the dark car films circulating on the market are of inferior quality, and sellers use dark car films with good thermal insulation to deceive car owners.

    In addition, clarity is the most important thing when buying car film, which is related to the safety of the car owner. Because the front bezel is a window to the outside world, the clarity of the film is extremely high. So for the front barrier film, the first thing to do is to be clear and safe.

    Secondly, the thermal insulation effect should be as high as possible on this basis. It's a good solar film.

    As the flagship product of Bekaert's automotive film, the visible light transmittance of Quantum Film Diamond 70 (LX-70), which has entered the Chinese market, has a visible light transmittance of 72%, which not only fully meets the requirements of the Ministry of Public Security, but also has a reflectivity of only 9%. So when driving in the sun, there will never be colorful glare that affects driving. The LX70 has a total shading rate of 55% and a shading rate of up to 63%.

    Therefore, after installation, the owner will feel that the car has become much cooler and more comfortable. The LX70's UV blocking rate is almost perfect, which can meet the daily needs of car owners to block UV rays. The LX-70 is world-class in terms of material selection, materials and production.

  10. Anonymous users2024-02-03

    The car film does not specifically say which color is the best, but it is necessary to choose according to the color of the body, and the suitable one is the best. There are four colors of car film: blue, green, gray, and white. The thermal insulation effect of the car film is not directly related to the color shade, and the heat insulation effect is determined by the coating process in the car film.

    Choosing the right color of car film will give your car the impression of being rigorous and poised. Now the body is generally in four colors: white, black, red, and blue.

    Light-colored cars are best to use brightly colored car explosion-proof films, most of which have high transparency and will not affect the heat insulation and explosion-proof effect. Nowadays, it is the first pure white automobile explosion-proof film on the market, which has strong thermal insulation performance. The window is fully transparent with film, and the whole car will look very clean, but its transparency is too high, resulting in poor privacy.

    There are also three colors: blue, green, and gray, and if they are very light, they will not look bad on any car. Judging from the effect of pasting, the color of the car film should be said to be as light as possible.

Related questions
18 answers2024-07-18

Choose a professional school for learning film, welcome to consult, generally a few thousand dollars can be used to ensure the amount of practical training every day, until you learn. Hope.

3 answers2024-07-18

Car wrap tool preparation

Explosion-proof film pasting tools mainly include glass cleaning brushes, wipers, wipers, shaping scrapers, utility knives, watering cans, hot air blowers, etc. >>>More

4 answers2024-07-18

Guangzhou film craftsman auto supplies company, can make dragon film.

12 answers2024-07-18

Car film is applied to car glass to control sunlight and ensure safety. >>>More

7 answers2024-07-18

The construction process of film is simple, which can be roughly divided into: film cutting - glass cleaning - baking and shaping - formal film - environmental cleaning. >>>More