The public flue in the building often pours smoke into the house, is there any good solution to it?

The first is to block the entire flue, and then you make a hole in the wall to discharge the fumes directly to the outside of the house, and second, install the flue check valve to solve this problem immediately, and the fumes can not come out, perfect.

This is very simple, install a check valve at the pipe mouth of the range hood at home to prevent the smoke from the main pipe from flowing back home. The check valve also needs to be replaced regularly, because if a lot of oil smoke accumulates in the direction of interest, the check valve will not be closed tightly, and it needs to be replaced with a new one.

Put a warning slip on the wall and write that if something like this happens, hold him accountable, or press the monitor to see who is doing the unqualified thing.

In our daily life, there is not only the fragrance of tea and books, but also the leisure of light clouds and clear breeze; Sometimes I also chase cars to catch up with work, and I am in a hurry to eat and sleep disorderly. Occasionally, I am also entangled in the trivialities of firewood, rice, oil, salt, sauce, vinegar and tea. Seeing it, this friend asked:

There is a problem with the fan blade of the check valve of your smoker, either it is broken or greasy, and it is replaced with a new one.

Open the flue vent on the roof and check that it is not blocked. The method of inspection is to shine a strong flashlight into the flue on the first floor at night to see if there is a partition to guide the fumes to the main flue. Generally, the installation of range hoods will be.

The check valve is also called the smoke treasure, the market price should be about 100 yuan, and the installation fee is about 50 yuan. Check valve installers generally will**. Hope mine is helpful to you!

<> if you used to install it, it was too much oil to open and not close, just change it to a good one that does not stick to oil, there must be a smell of smoke if you don't install it, and you just go to the roof to see if it is blocked, of course, this possibility is relatively rare, but there are also. I am a professional in the installation and maintenance of smoke machines and water heaters, and if you don't understand, you can chat with me privately. Straight into a less stressful space, which is your home.

The solution if you have no way to drum animal industry maintenance. First, you reseal your kitchen flue. Second, you also sell a high-power range hood.

Third, install a physical flue blocker. Turn it on every time you use it. The kitchen range hood itself is equipped with a check valve, when the range hood is working, we will hear the sound of the wind blowing open the valve, and when it is closed, the valve will stop and close the ventilation duct.

Due to the long-term operation of the valve plate, it is easy to adhere to the oil stains, resulting in the inability to completely close the ventilation duct, and it is easy to pipe the oil smoke. Need to change, the general hardware store has these accessories to sell their own can clean up the precipitated oil stain by the way, if the check valve is broken, this is more troublesome, need a professional master, if it is to replace the smoke machine, it is recommended to choose the brand check valve to deal with it!

The best way is to press a check valve at the mouth of the flue pipe, so that there will be no such smoke backing, so the current level is higher.

It's best not to pour cigarettes here, as it will make the kitchen very dark and you may inhale some poisons over time, so be careful when you go to get it.

I think the main thing is to check the tightness of the flue, or smoke with a range hood, you can also install a check valve, which can greatly improve the situation of the flue counterflow.

You can do without the public flue, put the flue on your own window, and let yourself have a separate flue in your home, which is also convenient to use.

Change to a new one, or check whether there is a blockage in the range hood, check regularly, and buy a range hood with relatively large power.

Generally, a good check valve can be used for a long time, but after a long time, it will fail due to sticky and slow oil stains, and it must be replaced with a new check valve, or removed and cleaned and then installed back.

Change to a manual check valve, open it when you want to open it, and close it when you want to close it.

Seal the common exhaust type cigarette mouth, directly punch the hole, and exhaust the smoke outside.

In a normal place, if you use kitchen utensils normally, you can bear it, or ask it tactfully, maybe he doesn't know if there is a problem with the neighbor's own smoke pipe. Don't face it directly with me downstairs, go straight to the property! People who do not use the normal heating equipment of the residents of the community to cook in normal places, causing the fumes to affect others, he himself does not plan to get along well.

Living in a high-rise house with an elevator, using an open wood stove, cooking and cooking at the interval between the balcony and the living room, cooking and boiling water, oil smoke, firewood smoke straight up.

The oil smoke at home is divided into two types, the first is the oil smoke generated by cooking at home, which can be discharged by the range hood or integrated stove. The second type is the oil smoke that is poured in through the common flue. This situation is more troublesome to deal with, and if you want to solve it thoroughly, you must install a check valve with good sealing performance and "fire prevention" to solve it, because water, gas and fire are more difficult to seal.

If the plastic check valve is installed, it will be deformed when it encounters high temperature, and when the internal pressure (suction) of the flue is large, the valve of the check valve will be sucked open, and it will be stuck by the oil smoke after a period of use, resulting in oil smoke backflow and fire. So far, the best thing is to install an intelligent fireproof fume check valve, which can not only prevent the fumes from pouring in from the public smoke sail chain, but also not be afraid in the face of the flue "fire", which effectively prevents the situation that the public flue "is on fire" and burns to our own home.

1. You can use the check valve, which is divided into flue check valve and range hood check valve, which can solve the problem of shared flue odor, usually the builder will be equipped with it when handing over the house, the ventilation diameter is generally 15cm, and the metal baffle of the eccentric shaft is inside. Connect the aluminum foil tape to connect the smoke pipe of the range hood with the smoke proof treasure you have chosen, this process is very easy, and you can do it yourself at home, but it should be noted that the seams must be plugged with dry plaster.

2. You can also buy a bottle of glass glue, the bottom layer is sealed with glass glue The effect is the best, and the use time will be longer, and glass glue is used where there are seams, so that the fume has nowhere to hide, and can only be discharged directly along the fume pipe.

3. The check valve is best installed when the bricklayer package pipeline, and a good smoke-proof treasure can be as long as the ceiling, and it does not need to be removed in the middle, so that it can effectively solve the problem of oil smoke in the home.

1. You can use the check valve, which is divided into flue check valve and range hood check valve, which can solve the problem of odor return in the common flue, usually the builder will be equipped with a good ventilation diameter of 15cm, and the metal baffle of the eccentric shaft is inside. Connect the aluminum foil tape to connect the smoke pipe of the range hood with the smoke proof treasure you chose, this process is very easy to get back and easy, and you can do it yourself at home, but it should be noted that the seams must be plugged with dry plaster.

2. You can also buy a bottle of glass glue, the bottom layer is sealed with glass glue The effect is the best, and the use time will be longer, and glass glue is used where there are seams, so that the fume has nowhere to hide, and can only be discharged directly along the fume pipe.

3. The check valve is best installed when the bricklayer package pipeline, and a good smoke-proof treasure can be as long as the ceiling, and it does not need to be removed in the middle, so that the branch can effectively solve the problem of oil smoke in the home.

First of all, the vents should be increased, and ventilation should be frequent, so that the smoke can also be ventilated in time, and more vents should be set up, so that such situations can be dealt with and solved in time.

I think you can install a range hood in the kitchen, so that it can reduce the smoke and dust, and it is good for our body.

Replace the flue directly, which can be very effective in solving the situation of pouring smoke, and buy some *** pipes when you buy it again.

You can install a range hood on the wall, and if there are no conditions, you can come directly to an electric fan, which has a particularly good effect.

1. Clean up the range hood, focus on cleaning the dirt on and around the check valve, and pay attention to check whether the blades are opened and closed tightly, and replace them in time if the blades are damaged.

2. Install the flue check valve on the flue, and it must be ensured that the check valve is installed firmly and has no gap with the wall. Together with the check valve of the range hood, it acts as a double safety to prevent the air flow from going backwards, forcing the flue gas to move in one direction towards the flue.

General back-up smoke may be:

1. During civil construction, the two adjacent smoke exhaust outlets are not staggered and connected by masonry (judgment method: whether there is commonality in the implementation of the neighbor's house).

2. The height of the smoke exhaust outlet on the top floor is too low, the brick air outlet is not covered with a blockage, and the cast iron smoke exhaust pipe is not equipped with a rain cap, and there is a phenomenon of back-irrigation.

3. The smoke exhaust channel upstairs is blocked and the smoke exhaust is not smooth (find a 10-meter thin line, tie heavy objects at one end and fall freely indoors to observe whether the falling objects pass through your home).

Suggested Solution:

1. According to the above three possibilities, determine the reason for the relapse of smoke.

2. If the two smoke outlets are connected, a professional company needs to deal with it. You can contact the property company or the civil construction team to repair it.

3. The reason can be dealt with by yourself, which is very simple.