How can a 380 meter make it slow down?

Updated on society 2024-07-29
4 answers
  1. Anonymous users2024-02-13

    There are many ways! But you can only take it apart, and what instruments and equipment are generally used are all lies!

  2. Anonymous users2024-02-12

    Generally, modern smart meters or electronic meters have no effect on interference with other external instruments and equipment, even if they are disassembled and adjusted, they must have professional tools, so they should not adjust the speed lightly. There is a way to save or slow down the power at the back-end according to its principle

    The meter at home runs so fast, how do you make it slow? In fact, there are many small tricks. Of course it's not stealing electricity! Let's take a look at the details:

    The first trick to slow down the meter: in summer, the temperature of the air conditioner is lowered by a few degrees, and it is generally maintained at 26 degrees Celsius.

    Reduced from 23 degrees to 26 degrees, it will save a lot of electricity in one summer! In winter, the air conditioner should be lowered by 3 degrees Celsius, and it is best to keep it at 20 degrees Celsius.

    Don't underestimate this small change, save a few degrees a day, a month...A year....By the end of the year, you'll be pleasantly surprised to find that your meter is really slowing down!

    The second trick to slow down the meter: unplug the TV and air conditioner when not in use.

    It's not enough to just turn off the air conditioner and TV when not in use......Because they are still stealing electricity and secretly using electricity, it is necessary to take a thorough approach - in such a month, the TV alone can save 8 kilowatt-hours of electricity!!

    The third trick to slow down the meter: don't let the water heater stand by for 24 hours.

    Some people like to plug in their water heater for years to go so long that they can take a shower at any time. But this is a big part of the power consumption in the home, as long as the plug is plugged in, it will continue to consume ...... powerIf it consumes 1 kWh of power for 1 day of standby, it will ...... for 365 days in 1 yearSomeone once calculated that a 60-liter 1500-watt electric water heater can consume up to 4-5 kWh of electricity for 24 hours ......Plug it in 30 minutes before taking a shower, and unplug it immediately after taking a shower and if no one else is doing it.

    Meters are slowing down", it's as simple as that! For those who live at home, there will definitely be a surprise in a month: the electricity bill is much less!

  3. Anonymous users2024-02-11

    Summary. Hello, I've been waiting for a long time, I'm very happy to answer for you How does the three-phase meter go slowly or the electricity consumption is reduced, or a phase current coil is powered off, or the circuit of the voltage transformer and the current transformer is partially disconnected, or the wiring of a phase current loop is reversed, which was originally connected to A1 and X1 in turn, and becomes connected to X1 and A1 in turn, I hope it can help you.

    Kiss Hello I've been waiting for a long time I'm very happy to answer for you How does the three-phase meter go slowly or the electricity consumption is reduced, or a certain phase of the current coil is off before the power is broken, or the circuit of the voltage transformer and the current transformer is partially disconnected, or the wiring of a certain phase current is reversed, which was originally connected to A1 and X1 in turn, and becomes connected to X1 and A1 in turn, I hope it can help you.

    Is there a ** in this?

    Kiss no** three-phase four-wire active energy meter goes slowly, the need to open the high-power machine is not much or only one phase live wire use, followed by the mechanical three-phase meter transformer is 5005 originally walked on the slow laugh judgment wild, if you go fast, with a lot of touch and shouting electric punch machine, it is impossible to determine how many times the meter is going back and forth.

    Can I take a picture to show you and teach me how to operate?

    Kiss **I can't see it clearly here, you can try it according to the operation.

    Method 1: The professional instrument [electric energy meter efficiency and clever state inspection device] is used to calibrate the meter, so that the electronic meter can be slowed down. Method 2: Modify the pulse constant in the metering program. Method 3: After disassembling the meter, a copper wire is added to the sampling shunt.

    Steps: 1. Tilt the vertically installed meter by 15°. 2. Open the meter wiring cover, and loosen one of the screws of the current wiring card in the upper left corner of the terminal (horizontal clamp filial piety return to the source), (note that there is electricity, please use an insulated screwdriver to operate), and the meter at this time is counted when the electricity load is large, and the load hour is not counted.

    3. If you are a little more professional, you can open the meter shell and loosen the top wire above or below the center of the rotating disk, which is the best way to use this method with the first method.

  4. Anonymous users2024-02-10

    Summary. Hello, kiss, there are not many high-power machines 2, only one-phase live wire use 3, the mechanical three-phase meter transformer is 500 5, it is originally slow, if it goes fast, there are many machines that use electricity.

    Kiss hello brother letter to eliminate the high-power machine is not much 2 only one phase of the line of fire to make the tan group with 3 mechanical three-phase meter transformer is 500 5 originally go slowly, if you go fast, the machine that uses electricity is envy a lot.

    Kiss hello The way to slow down the meter: the right way: less royal electricity.

    The less the electrical appliances are turned on, the less power they have, and the slower the energy meter will be; The more electrical appliances are turned on, the faster the meter will go; If you want to save money, you have to turn off the electrical appliances that are not in use or unplug the power supply. Crooked: Stealing electricity.

    Bypassing the metering device to use electricity or making the metering device inoperable. Electricity theft is illegal, be careful!

    Hello three-phase meter slowdown 3 ways for reference: 1. Tilt the vertically installed meter by 15 ° 2, open the meter wiring cover, and loosen one of the screws of the current wiring card in the upper left corner of the terminal (the clamp of the horizontal leather mold), (note that there is electricity, please use an insulated screwdriver to operate), and the meter at this time is counted when the load is large, and the load hour is not counted. 3. If you are a little more professional, you can open the meter shell and loosen the top wire above or below the center of the rotating disk.

    When you open the meter, you can see that one of them is to adjust the zero latent movement, and the forward and backward autobiography of the meter can be adjusted when there is no load, and the other is to adjust the speed when there is a load.

Related questions
19 answers2024-07-29

In fact, the meter is according to the normal speed, if the electricity consumption at home is more, the meter will naturally go faster, and the electricity consumed is also more. >>>More

3 answers2024-07-29

From the fetal point of view, the pain of abortion is indescribable, and the innocent child was crushed and turned into blood under mechanical surgery before he could see his parents. The fetus already has a heartbeat at 7 weeks, which can be measured by ultrasound, and you can see the growth process of the fetus from 0 to 40 weeks. The fetus also feels, is conscious, and knows the pain, the fetus is also a small life, and the fetus will curl up because of the pain in the process, which is very cruel. >>>More

6 answers2024-07-29

If you are a customer of Guangdong Power Grid Company, the information required for the transfer business is as follows: >>>More

8 answers2024-07-29

Growth habits. To understand the winter maintenance of the dragon tuzhu, first of all, to understand its characteristics, the dragon tuzhu likes to grow in the sun, the air is humid environment, it can not withstand the invasion of cold. Therefore, in winter, it is necessary to ensure that the temperature is above 15 degrees, which can be conducive to its wintering. >>>More

4 answers2024-07-29

You have to wash your face thoroughly every time you have time It is best to fry the salty salt in a pot every night (it is a little gray, pay attention, don't fry it) Then put some fried salt in the washbasin, pour boiling water Water is not too much Take a clean small towel and soak it in it (some hot Oh) Take out the towel and wring it out Gently apply it to the acne (this is suitable for people with a lot of acne) Of course, pay attention to the temperature yourself Finally, take warm water and wash it off. >>>More