How to use sewing wax? Can the sewing agent be removed without waxing?

1. Rough surface tiles, antique bricks, wood grain bricks, etc., must be marked with beautiful sewing wax, as well as aluminum alloy, wallpaper corners, such places should be marked with beautiful sewing wax;

2. Where waxing is required, be sure to clean it in advance and wipe the dust on the surface with a rag;

3. Before cleaning the seam and playing the sewing agent, apply the sewing wax on both sides of the gap in advance, be careful not to smear the wax into the gap, and the appropriate amount, if the amount is too small, the surface of the tile will not be smooth.

4. After waxing, you can glue and press the joints normally, just like gluing on tiles with smooth surfaces. After the sewing agent is cured, you can use a spatula to remove the sewing agent, and the wax will also be shoveled off with the sewing agent, and no additional cleaning is required.

Tile sewing wax is suitable for rough stone tiles, windows and other places, mainly to wax the gaps, and how to use the sewing wax:

1. Clean crevices and surfaces.

Before waxing, it is necessary to clean the stone bricks, windows and other places to be waxed, especially in the crevices.

2. Start waxing.

After cleaning, you can start to use tile joints to wax, use a sponge to wipe a layer of wax in the wax box, not too much, and then gently wipe back and forth on both sides of the gap on the surface of the tile. After all the areas are waxed, you can glue and press the seams, and then wait for the wax to dry before removing the waste.

Precautions: Don't apply too much wax when waxing, and don't deliberately apply the wax into the gaps, because where there is wax, the real porcelain glue can't stick.

The sewing agent can be removed without waxing. Before the sewing agent dries, you can use a professional sewing cleaner to deal with it, and after drying, it is recommended to use a hair dryer to blow the sewing agent on the furniture, until it softens and slowly cleans it off with a spatula, pay attention to the hair dryer mouth is not too close to the furniture.

Generally speaking, it is necessary to wax the tiles such as antique bricks when they are seamed, and the waxing needs to be evenly played. If you have to shovel the seam the next day, you may lose your time. When using oil-based materials such as porcelain glue or ceramic clay products for sewing construction, it is recommended to use the method of pasting masking paper.

Pasting masking paper can effectively avoid secondary pollution of tiles and shorten working hours. At the same time, it should be noted that the masking paper should be pasted on both sides of the tile, and the construction should be filled along the masking paper. In contrast, the masking paper is more labor-saving, convenient for construction, and can protect the tile to the greatest extent.

Regarding the subject's confusion that the beautiful sewing wax can be used on the floor wax, I think it can't.

Generally speaking, low-performance things cannot be replaced as high-performance things, unless you can prove that the beauty sewing wax is indeed better than the floor wax process, I do not recommend you beauty sewing wax.

Floor plate wax is used.

It's also possible, after all, it's just such a beautiful sewing, you don't necessarily need to use floor wax, and there is no certain rule that you can't use it. And now the sewing agents are all synthetic, so you don't need to apply any material after brushing.

It's okay, after all, it's just a beautiful sew, and you don't necessarily need to use floor wax.

There is no requirement to use it.

I can get rid of it.

How do you get rid of the beauty sewing without waxing?

1. If the sewing agent is not dry, you can use a professional sewing cleaner to deal with it.

2. If it is already dry, it is recommended to use a hair dryer to blow on the sewing agent, and then clean it with a shovel after the sewing agent softens.

3. If it is an antique brick for beauty joint construction, it needs to be waxed evenly, and masking paper should be used during construction to avoid pollution of tiles.

What should we pay attention to in tile joints?

1. Choose a good caulking material.

There are many caulking materials on the market, putty powder, white cement and beauty sewing agent are common. The first two materials are more traditional, and there are some defects in performance, which will fall off and crack after a long time, and the waterproof effect is relatively poor. Therefore, more people will choose the sewing agent now, which has the advantages of non-fading, waterproof and mildew-proof.

2. Caulking pays attention to time.

Tile caulking must not be anxious, generally tile paving can be completed 24 hours after caulking, the tile is just pasted not firmly, at this time caulking is prone to tile displacement. Moreover, if the caulking is too early, the tile is also prone to alkali return, so we must pay attention to the time when caulking.

No, because their materials are not the same, and the smell is not the same.

Extended content: Is it okay to do beauty sewing without beauty sewing wax?

No, usually most of the tiles need to be waxed, because there are small pores on the surface of the polished tiles, if not waxed, the beauty joint agent is easy to penetrate into the inside of the tile, and it will affect the effect of the beauty seam for a long time, so it is necessary to wax the tile gap before doing the beauty seam.

What should I pay attention to when doing beautiful sewing?

1. Be sure to clean up the dirt at the tile joints before carrying out the beauty sewing agent, otherwise the beauty sewing agent will peel off from the ground in the later stage, because the tile joints will not be cleaned and the inside will be trapped. If there are impurities, the joints and the ground cannot be completely removed, which will affect the appearance, so remember to clean the tile gaps first.

2. Some hoses cannot be used for the newly purchased sewing agent. The first 30 cm is used to seal the rubber head, which is mixed with white gel. Therefore, the newly bought beautifier needs to blow off all 30 cm of white glue until the normal beautifier appears, and then you can start beautifying the sewing, otherwise the overall beautification effect will be affected.

3. If it is an antique brick floor, it is rough and uneven. If you apply the sewing agent directly, it will be difficult to clean the excess sewing agent, so be sure to apply a layer of wax on both sides of the gap or apply the sewing agent first. Masking paper is easy to clean up excess beautifier and can also avoid scratching the floor when cleaning the delighter with a knife or spatula.

4. Although the beauty sewing is very popular now, and it is indeed more beautiful after the beauty sewing splicing, most of the beautiful seams are relatively soft, and the initial construction is very simple to cure, but if it is ironed, it is easy to soften and collapse, affecting the appearance. Therefore, it is best to use cement to make a joint treatment for the gap before the beautiful seam, leaving a gap of 2mm. Especially in the kitchen, the heat is relatively high, so the floor tiles and wall tiles in the kitchen must be sewn with cement first, so that they can be sewn beautifully, which will be more beautiful.

<> one: a small shovel gently scrape off the sewing wax, two: dry stool type clean wet towel can be wiped off, three:

With hot water, pour hot water on the area coated with Mitsu Sewing Wax, and the wax will float on top of the hot water, and you can clean it directly. When using the sewing wax, pay attention to cleaning the tile joints, and then you can use a sponge to dip the wax box, gently wipe back and forth on both sides of the gap, remember not to fall into the seam to be sewn, otherwise it will not be able to stick, after the waxing is completed, you can glue and press the seam, and you can clean up the waste after the wax is dry. Notes:

At the beginning, it is necessary to polish the waxing area, clean the area, and use it in moderation, if it is too little, the surface of the tile will not be smooth.