Decoration is whether the water pipe should go to the top or the ground, this is the correct answer

Updated on home 2024-07-05
5 answers
  1. Anonymous users2024-02-12

    1.The advantage of the water pipe on the top surface is that the leakage will not involve the floor and is easy to find, but the water pipe will not leak if it is done.

    2.Walking on the water pipe permanently bears the pressure of the water flow, which has an inevitable impact on the life quality of the water pipe.

    3.Even if the water pipe bursts, it is more difficult to repair the roof than the ground, because the damaged pipe wall becomes thinner, and even if it is repaired, it will not last long.

    4.Pipes exposed to air for a long time have a shorter life than sealed environments, and water pipes have the shortest life in the sun.

    5.The pipe is on top, half exposed to the air, half buried in the wall ground, and the pressure of the water on the two parts is not the same (the water pipe buried in the wall is protected by a layer of cement mortar, which counteracts the pressure of the water in the pipe on the pipe wall; The water pipe exposed to the air can only bear the pressure of the water by itself, and the pressure of the water pipe buried in the ground is almost zero) The pressure is much greater than that of the latter, which is harmful to the water pipe in the long run.

  2. Anonymous users2024-02-11

    House decoration, water pipes go to the sky or the ground? After reading these 3 points, you will know how to choose! Fitment; Huizhou decoration; renovation companies; Villa; villa decoration; Type; small apartment; interior design; decoration style; Decoration renderings; Toilet; Balcony; Living room; Bedchamber; Kitchen; New Chinese Style; Modern minimalism; Light luxury.

  3. Anonymous users2024-02-10

    First, the water pipe goes to the ground.

    Advantages: material saving, easy installation, economical.

    Disadvantages: Water leakage is difficult to find, maintenance is troublesome, may cause serious losses, and even affect the downstairs neighbors.

    Second, the water pipe goes to the top.

    1. Advantages: Once the water leaks, it can be found in time and convenient for maintenance.

    2. Disadvantages: 1) Aerial work (hot melt) has stricter requirements for the installation master, and it is counterproductive for ordinary workers to do poor interface welding.

    2) The water pipe will go a little more, and the cost is relatively high.

    3) It is easy to hit other people's wires and water pipes (because the water pipe passes through the beam) may increase the possibility of punching holes in the beam, which will reduce the strength and seismic resistance of the beam, especially the stirrups and main reinforcement.

    4) Water pressure decreases.

    5) Increased noise from the water flow.

    6) If it is not firmly in the cement layer, the pipeline joint will loosen with the thermal expansion and contraction of the water pipe, thus causing hidden dangers.

    In fact, whether to go to the ground or to the top depends on the specific situation, and now almost all pipelines are concealed installations. Some are in the ceiling, this is generally removable, and some pipes are covered by wall and floor tiles, which are basically non-removable. Only by trying to reduce the number of pipe joints in the non-removable wall and floor tiles is an important way to increase the safety factor of the piping system.

    There is no point in blindly "going to the top". If the pipe goes through a considerable zigzag on the ground and then climbs to the ceiling and then turns back down, this method has caused a lot of joints to be under the ground, which is more than worth the cost.

    Therefore, when thinking and planning the layout of the pipeline system, "pay attention to the quality of the weld and reduce the number of joints under the tile" is the key, rather than simply "go to the top or go to the ground" to distinguish. There are no absolutes in the world, "go to the top or go to the ground", depending on the structure of the house and the foundation of the waterway. However, in general, it is recommended that the water pipe go to the ground.

  4. Anonymous users2024-02-09

    It is understood that there are generally three types of installation of waterways: walking on the top, walking on the ground, and walking on the wall.

    1. Advantages of going to the top: it is easy to find when the water pipe fails, and the maintenance is timely; The joint is installed on the top, not embedded in the wall, which is more convenient when repairing. Cons:

    The water pipe is exposed to the air for a long time, and the service life is slightly shorter due to the long-term pressure of the water collection flow; The circuit goes to the ceiling, the switch socket is basically about a meter high, if the head of the ceiling wiring, the wall damage is longer, and the wires used are more than the ground.

    2. Advantages: It costs less time to install on the ground, it can speed up the installation, and the pipeline excess can be shortened and the cost can be reduced; The ground-running water pipes are protected by concrete, which can reduce the pressure of the water flow and have a relatively long service life.

    Disadvantages: It is difficult to repair when there is a problem, and the floor needs to be pried open to repair; Broken water pipes are difficult to detect, and if the home is built with wooden floors, the financial damage may be even more serious; It is easy to seep water downstairs, which may cause complaints from neighbors and more maintenance costs.

    3. Advantages of walking on the wall: the pipeline walks on the wall, compared with the ceiling, the material is the least, which can save the decoration cost and does not need a large area of the ceiling.

    Disadvantages: If the water and electricity installation is on the wall, the installation difficulty is relatively high, and the slotting is more difficult, which has a destructive effect on the wall. After reading my introduction, now you know how the water and electricity renovation is going to go, right? Hope it helps!

  5. Anonymous users2024-02-08

    Hydropower installation is a crucial step in home decoration, so in the process of installing hydropower, we need to strictly check the quality of water and electricity. What are the key points of water pipe installation? Let's take a look with me at a loss!

    First, the home improvement water pipe goes to the top or the ground.

    Home improvement water pipe is recommended to go to the top, under normal circumstances, the water pipe has the most sensitive grasp of the problem is water leakage, if the water pipe goes to the top, once the water pipe leakage problem we are easy to find, and can take corresponding measures to repair in time, so as not to cause serious consequences, but when the water pipe goes to the ground leakage, it is difficult for us to detect, and even wait for the water to leak downstairs to find out.

    Second, what are the key points of water pipe installation.

    1. The home decoration water pipe is generally topped, which can not only avoid artificial damage to the water pipe, but also find and solve the problem of water leakage in time. In addition, it should be noted that the outlets and connections of the hot and cold water pipes must be parallel, the cold pipe should be installed on the right side, and the heat pipe should be installed on the left side.

    2. In the process of installing the pin vibrator hot water pipe, the water outlet and water inlet of the water heater must be distinguished, and the water outlet must be connected with the pipeline of the toilet together. After installation, you need to open the valve, check whether there is a water leakage problem, and after confirming that there is no problem, you can install the faucet and shower head.

    3. The bathroom is the most humid place in the family area, and many people like to wrap the pipes tightly when installing the bathroom pipes, which will cause the moisture to be wrapped in the pipes, and the moisture in the bathroom will become more and more serious.

    Summary: The relevant content of the home improvement water pipe to the top or the ground is introduced to you here, I believe that you have a better understanding of the installation of water pipes, and I hope to help friends in need. Installing water pipes is a complicated thing, so it is recommended that you let a professional construction personnel install them to ensure that the water pipes can be used normally.

Related questions
12 answers2024-07-05

A lot of people are decorating.

When I was very entangled in the water pipes. >>>More

5 answers2024-07-05

Housing decoration, water and electricity to go to the top or the ground? What are the advantages and disadvantages of walking to the top and going to the ground? Advantages and disadvantages of home renovation water and electricity topping: >>>More

8 answers2024-07-05

Hydropower decoration to go to the ground or to the top? Don't dwell on it, it's the right way to do it.  >>>More

22 answers2024-07-05

We will always have such and such questions when decorating the house, but as long as we do our homework well before decorating the house, we can avoid many detours. Just like the subject asked, in the process of installing the house, the water pipe is on the ground or the top, so I will answer it below. >>>More

8 answers2024-07-05

There are generally large onesRenovation companyand the wire will goceilings, which costs more; Secondly, the walls do not advocate horizontal grooves of more than 30 cm; It is common practice to wiring the floor with electrical wiring, but toilets and kitchens are suitable for the top. The ground humidity is too heavy and easy to break; Once the line buried in the ground is broken, if it is to be repaired, it is necessary to dig porcelain. For materials and labor, taking the ground wire can save some materials and facilitate construction; However, considering factors such as later maintenance, the ground is not suitable for walking wires. >>>More