Stick the plaster line first or scrape the plaster putty first?

The correct order: first paste the plaster line, then scrape the putty, then spray paint, and install the door. After loading, make up the putty.

The status of gypsum line in home decoration can be described as the most inexpensive and huge, not only can be used for relief pattern modeling, wall top ceiling, but also can be used as baseboard treatment. In addition, we will also consider the issue of cleaning and maintenance in our lives, and plaster lines happen to be a very easy to clean material. To sum up the above advantages, the gypsum line is also widely used in home decoration by major decoration companies and owners.

However, what should be paid attention to in the construction process of the gypsum line, so that it will not warp or fall off after being used for a long time in the later stage? What are the key points of the gypsum line construction of the construction process.

Scraping putty construction process gypsum line.

What needs to be done in the early construction of the gypsum line to meet the standard? First of all, we must do a good job of the base layer to ensure that the wall is inspected and renovated with a ruler, and secondly, the top surface of the wall has been scraped with putty twice, and the visual surface is smooth without protruding or recessed parts, only by doing this can we ensure the early quality of the gypsum line construction in the later stage. During construction, the front of the construction is carried out first, starting from the front, only in this way can we ensure that the front joint is less, and the less half of this kind is put in the inconspicuous part.

During the construction, it should be adjusted quickly and quickly, and the place that should be repaired should be made in place in a short period of time after adjustment, and the place that should be cleaned up should be cleaned in place, and then cleaned with clean water to ensure the cleanliness of the decorative surface (because the solidification time of the gypsum is short, the hands and feet must be sharp, otherwise it is impossible to clean up after the adjustment).

For the important part of the construction of the gypsum line, the masters of Chengdu Longfa Decoration believe that it is the construction part of the corner and the joint. The drift of the work is not beautiful from this point can be easily found, usually the gypsum line joint part must be scraped gypsum, and then docked up, pay attention to whether the pattern is correct when docking, the height is consistent enough, followed by the gypsum line as a whole to a line can not be in and out of the wall to walk, the low part needs to be straight with gypsum, and then use clean water to clean the gypsum line surface of the gypsum line, so as not to be able to clean up in the later stage;

After the gypsum line is pasted, the painter repairs the joint part of the gypsum line again to achieve the fading of the joint part, so that the angular part is not so obvious, and it is easy to affect the overall effect at a glance. Therefore, the small plaster line can give full play to its role after the construction is completed, and it is better not to use it if it is not used well.

Generally, when decorating, the correct order is to paste the gypsum line first, and then scrape the putty, in the spray paint door, after the installation of putty, first of all, do a good job of grassroots protection, the wall with a ruler to check the renovation after the second wall top surface has been scraped twice putty, the visual surface is smooth without protrusion or recessed parts, generally only to do these can ensure the early stage of the later gypsum line construction.

When decorating, stick the plaster first, and then scrape the putty.

Reason: The plaster should be painted, and putty can be used to remedy the uneven parts of the plaster.

The reason for the plaster line first: the plaster line will have gaps when it is installed.

The reason for the putty after scraping: the plaster line is stronger and more beautiful.

Question 1: To decorate a house, should you paint the wall first or install the gypsum line first? Press the plaster line first, then scrape the wall, and deal with the gaps in the gypsum line when hanging the wall.

Question 2: Paint the wall first or paste the gypsum line first Decoration follows the basic principle of first up and then down, from the inside to the outside, and also considers the protection of the finished product, the construction period, the process and the convenience of construction. The general practice is:

First scrape putty on the wall and ceiling, only the paint process remains, and then the floor tiles are paved, and the wall tiles and wall putty are not in the same area, which can be carried out synchronously, and finally brush the paint. In the case of a tight construction period, the construction can be carried out in sections according to the room; If the conditions are special, the floor tiles must be paved first, and the ceiling and wall must be constructed after the adhesive mortar hardens (more than three days in summer and more than seven days in winter), and then the roof and wall are constructed after the surface is covered with waste cardboard; For rooms with both wall tiles and floor tiles, the wall tiles are constructed first, and the floor tiles are constructed later; During the construction of the coating, the ground should be protected, and the parts that cannot be protected from the paint can be easily erased with alcohol; Finally, the skirting is glued and the brick joints are treated.

Question 3: When decorating, do you scrape or stick the plaster line first? First gypsum line, there will be gaps in the gypsum line when installing, and then scraping putty can make the gypsum line more firm and beautiful. Of course, the biggest determining factor is the skill of the decorator you are looking for.

Question 4: Apply wall paint first or take the gypsum line first This depends on whether your wall is painted first. If you don't paint, I think it's better to stick the plaster line first. If you paint it, you have to shovel it off to stick the plaster line.

Question 5: Gypsum line installation method, is it to scrape putty or install gypsum line first? The wall is filled with putty in the gypsum line, otherwise, the uneven wall will affect the quality of the finished gypsum line.

Question 6: The order of first painting the wall and pasting the gypsum line on the wall The gypsum line is pasted first and then the wall is solid, because there will be gaps after the gypsum line is pasted, and these gaps can be dealt with later. A lightning refresh can solve your renovation problems for you.

Question 7: To decorate the house, is it to paint the wall first or install the gypsum line first The gypsum line is the first house The rough house is first pasted with the gypsum line and finally the wall is painted into a color or painted separately The plaster line mold is bright.

Question 8: Paint the wall first or install the gypsum line first for the decoration of the new house Press the gypsum line first, then scrape the wall, and deal with the gaps of the gypsum line when hanging the wall.

Question 9: Is it to deal with the wall first or paste the gypsum line first It is usually the wall first and then the gypsum line, the reason is that the wall is smoother after the wall is treated, and the gypsum line is also smoother, good-looking and stable.

Question 10: Should the gypsum line be scraped putty and painted, and whether it should be installed before or after painting. The order is: first glue the plaster lines, then scrape putty on the wall, and finally apply latex paint.

Gypsum line is a relatively common home decoration material, often used to make TV background wall modeling, ceiling and so on. Some owners feel that the installation of suspended ceilings will be more oppressive when carrying out interior decoration, so they will choose to use gypsum lines to simply decorate some wall roofs. So in the construction process, should the gypsum line be pasted first or the putty scraped first?

Next, I will briefly introduce it to you.

1. Under normal circumstances, the gypsum line is pasted first and then the putty is scraped, because the wall of the blank house is mostly cement wall, and its surface is uneven, as if it has been brushed, so the wall can make the gypsum line paste more firmly. There will be gaps in the gypsum line during installation, and the gypsum line is scraped with putty first, which is conducive to the later repair of the gypsum line and makes the gypsum line more beautiful.

2. Before installing the gypsum line, we need to treat the base layer of the wall, such as scraping the putty layer of the wall; The original unevenness of the wall can be leveled with plaster; The base layer of the wall should be cleaned. Then we prepare the glue, brush the glue on the back of the plaster and the wall, and quickly paste the plaster line on. If the plaster line is thick or the wall is not in good condition, we can punch holes in the wall and fix the plaster line to the wall with nails.

3. Gypsum line is an interior decoration material, which has the functions of fire prevention, moisture prevention, sound insulation, heat insulation, etc., and its decorative effect is good. When we choose a gypsum line, we can look at the thickness of the plaster line. The thickness of the concave and convex patterns of products with embossed decoration is usually more than 10mm.

We can gently tap the plaster line, and the sound of brittle plaster line line line is of good quality; The muffled plaster lines are mostly inferior products.

Summary: Regarding whether to paste the gypsum line or scrape the putty first, I will briefly introduce it to you here. I hope that after reading this article, you will be able to understand this. When you paste the plaster line, the correct installation sequence is to install the plaster first and then scrape the putty.

Decoration has a certain construction sequence, so the decoration is to scrape putty or paste the gypsum line first, and let me explain it to you today.

The decoration is to paste the plaster line first and then scrape the putty, because:

1. Paste the gypsum line first and then scrape the putty, which is conducive to the gap and edge of the gypsum line. If you scrape the putty first, although you can make the flatness of the wall better, the premise is that the putty must be scraped all the way to the top, otherwise there will always be gaps when the gypsum line is closed, which will affect the appearance.

2. Paste the gypsum line first, and the paste effect is better. The wall in front of the unscraped putty is a cement wall, and the surface of the cement wall of some rough houses in Xiaotan is even uneven, as if it has been brushed, and such a wall is more conducive to the pasting of glue, which is the same as the wall tiles that are pasted in parallel with the health stove.

3. The plaster line is pasted first for the sake of later residence. Even if the wall of some rough houses or second-hand houses is scraped with putty, there will be powder, delamination, and inequality, and the conditions of this paving are also very unfavorable to the gypsum line, which may be stuck at the time, but it may not be long before it may fall off.

Who will do the plaster line or putty first? Many people decorate for the first time, do not know the order, if the plaster line and putty are not on the same color, what should I do? Let's take a look at the answers provided by this site!

Under normal circumstances, the gypsum line is pasted first and then the putty is scraped, because the wall of the rough house is mostly cement wall, and its surface is uneven, as if it has been brushed, so the wall can make the gypsum line paste more firmly; Moreover, there will be gaps in the gypsum line during installation, and the gypsum line is scraped with putty first, which is conducive to the later repair of the gypsum line and makes the gypsum line more beautiful.

It can be pasted, but it needs to wait until the putty is completely dry before construction, so as to avoid uneven wall surfaces. However, it is generally necessary to paste the gypsum line first and then scrape the putty, because this can make the adhesion between the cement wall and the gypsum line higher, even if there is a gap when the gypsum line is pasted, the putty can also be remedied, so that the back painting effect is better. In addition, before installing the gypsum line, it is necessary to treat the wall base layer well to avoid affecting the use effect.

1. Take a picture of the wall color with a camera and hand it over to the gypsum wire manufacturer.

2. Entrust the gypsum line factory to paint the gypsum line of the same color as the wall according to the **.

3. Buy some masking paper and stick it directly on the bottom surface of the gypsum line and the junction of the wall. Once pasted, the wall can be painted in other colors.

Enter the area and get the decoration for free**].

In the process of home decoration, many designers will design some gypsum lines in the home space, but if the gypsum line is not installed well, it is easy to wear and crack after installation, which will affect the aesthetics of the home space. What are the installation methods of gypsum line? Let's take a look!

1. Who should install the gypsum line and putty powder first Under normal circumstances, the gypsum line should be installed first and then the putty powder should be brushed, because Zhaoye will produce gaps in the process of installing the gypsum line, and then brush the putty powder after installing the gypsum line, which can deepen the firmness of the gypsum line, and also make the installation effect of the gypsum line more beautiful. 2. What are the installation methods of gypsum line 1. The installation method of gypsum line is mainly divided into two types, one is gypsum powder glue, and the other is to directly use gypsum line bonding materials, among which the most frequent use is gypsum powder glue, this method can directly paste gypsum line on the wall, which is very convenient to operate. 2. The second gypsum line installation method is to use adhesive materials for installation, so the requirements for the wall base are relatively low, and the requirements for the construction environment are not high, and it can be installed at any time, because special bonding materials are used when fixing, so the firmness of the gypsum line is higher than the first installation method.

3. Whether it is the method of using gypsum powder glue or spotlight installation, it is necessary to install the ceiling cover before the gypsum board can be installed, because the gypsum line needs to be scraped putty after the installation is completed, so the gypsum line will be pasted after the installation of the ceiling cover, and the effect will be better. Summary: gypsum line and putty powder who first on the relevant content is introduced to you here, gypsum line not only has a good moisture resistance and fire resistance, but also can play a good decorative effect, you can understand the relevant skills in the construction process, and please professional construction personnel to operate.

Do the math how much it will cost you to renovate and burn your home