What should I do if the grille on the head of my Philips shaver seems to be broken?

If the grille on the head part of your Philips shaver is broken, there are a few ways to do it:

1.Replace the bit: If the damage to the grille is minor, you can remove the head and purchase a new head to replace it.

2.Replace the entire shaver: If the head part of the grille is badly damaged, or if the head cannot be separated from the grille, the entire shaver will need to be replaced.

3.Seek after-sales service: If you are unable to replace the head or the entire shaver yourself, you can contact Philips' after-sales service department for their assistance.

Regardless of the method taken, the shaver will first need to be pulled out of the power supply to prevent safety issues such as electric shock. When changing the head or the entire shaver, you should pay attention to the operating specifications and use the appropriate tools. If you are not sure how to do this, it is advisable to seek the help of a professional.

Philips' cutter head is generally not repaired if it is broken, but if it is a little deformed, you can take a small batch and carefully flatten it, and if it is worn through, it can no longer be used. It is better to change the cutter head of the old machine than to change the new machine. Older cutter bits are hard to buy and very expensive.

Whether the cutter head can be used in your current machine, the rubber head that drives the blade and the blade card you bought can also be used.

This is generally the case for two reasons:

1. The deformation of the cutter net causes the blade in the cutter head to be in excessive contact with the cutter net when working. Drive the blades to rotate together.

2. The knife holder (plastic bracket) is damaged and cannot be jammed. In this way, when working, the cutter head rotates with the spindle.

Whatever the reason, it needs to be repaired in a dedicated after-sales service department. However, changing the tool head may be a little more expensive, and changing the tool holder is much cheaper. By the way, the 360 is an old model, and it is normal for such minor problems to occur. The landlord probably used it for a year, right?

Hope it helps.

Buying one is the best solution, if you need it urgently, you can try to scrape it with gauze to see if it can.

In other words, the head of the shaver and the knife net are one.

If it's broken, change it.

I have to change it, otherwise it will hurt easily.

If it rots a little, you can use transparent glue to stick it.

Braun razor's grille is rotten to buy?

Can you buy m6o grilles online.

If it is damaged by quality during the warranty period, it can be warranted and replaced free of charge. If it is damage caused by human use, the only way to do it is to buy a new one.

The razor's grille wears out sooner or later with the number of uses. If you use it too often, it may be damaged earlier. So it should be cleaned and maintained during and after use.

Now some small household appliances, due to the large market competition, so many of them try to reduce the cost of materials, so although it is cheaper than before, the quality has declined.

Depending on the model, ** can be found on.

If it is damaged by quality during the warranty period, it can be warranted and replaced free of charge. If it is damage caused by human use, the only way to do it is to buy a new one. It is really not possible to exchange for a new one, and it is not wrong to use a razor in my cousin's car.

If you can't fix it, buy a new razor.

Open the cutter head cover first, and if the rotating wheel can be rotated after starting, it means that the motor and transmission are basically fine, and the cutter head is generally not installed. Just try to install the cutter head again. This is often the case when the cutter head is not properly installed.

Another point to note is that when disassembling and washing the knife head by yourself, you must not disassemble the knife head from the knife holder, and just punch the knife holder. If you want to remove the cutter head, you must pay attention to each rotating cutter head and their respective mesh cover not to be confused, because Philips cutter heads are all imported, using computer grinding, although its patented technology rotary cutter head has a self-grinding effect, but the sharp effect may be worse after confusion. Philips is expensive because the quality of the cutter head is not generally good, and it is expensive to buy it if it is bad.

Buying a razor, the battery is also very important, I recommend Shuanglu battery, I use this, for many years, I have not dared to change to another brand.

It's okay at first, you may feel that the shaving effect is not as good as before, you just need to use it for a while.

As detailed in the manual, turn off the shaver, press the release button on the shaving head part and remove the shaving head holder from the shaving head part, turn the fixing ring counterclockwise, then remove it from the shaving head, remove the shaving head from the shaving head holder and throw it away. Place the new shaving head on the stand. Then place the retaining ring on the shaving head and rotate it clockwise to reattach the retaining ring.

Replace the shaving head holder back into the shaving head part (a "click" can be heard). Hope it helps.

This is generally the case for two reasons:

1. The deformation of the cutter net causes the blade in the cutter head to be in excessive contact with the cutter net when working. Drive the blades to rotate together.

2. The knife holder (plastic bracket) is damaged and cannot be jammed. In this way, when working, the cutter head rotates with the spindle.

Whatever the reason, it needs to be repaired in a dedicated after-sales service department. However, changing the tool head may be a little more expensive, and changing the tool holder is much cheaper. By the way, the 360 is an old model, and it is normal for such minor problems to occur. The landlord probably used it for a year, right?

Hope it helps.

There are sales, generally sold after the sale of your shaver brand, in addition, there are **, Jingdong, Excellence and the like**.

If your razor price is very cheap, then there is no need to change, the after-sales knife network is very expensive, the domestic product is generally 3 40, most of the imported brands are above 100, if the razor is not expensive, it is better to add some money and buy a new cost-effective.

If you're using a Philips razor, you're good to go:

If your razor itself is very cheap, then many domestic electric knives are imitation Philips products, so the blade knife net can basically be used with Philips, you can go to the small household appliance market to buy a domestic product knife mesh replacement, or directly buy a cheap domestic product to replace the knife net

That's what I did, hehe

If you're using a good razor, you can go online or buy an original Philips replacement blade blade mesh, a low-end mesh combination is about 40 Good ones are more expensive

Of course, there are some for sale, just change the cutter head!

Philips razors have a two-year warranty, if you bought them online, find the original seller and pay a few dollars for postage to ask them to repair it for you.

If you buy it in a shopping mall, you can go to the Philips repair point for warranty, it is best to have an invoice, they look at the production date without an invoice, and some places are different and will ask you for a bill or something.

If you need to change it yourself, it will cost 26 yuan to 36 yuan, which is to buy a bulk cutter head plus postage.

The core of Philips is in the knife head, generally with four or five years without a problem, depending on your situation, it is likely to buy a high imitation or something, Philips repair is only three out of 100,000. It's rare for you to be in that situation.

If you don't understand, you can ask me again. We specialize in Philips.