What is the difference between engineering tiles and household tiles?

The amount of engineering bricks is large, so generally speaking, engineering tiles will be lower than household tiles, and the quality is relatively inferior, so they will be separated from two types, but some big brands are relatively reasonable *****, so engineering and home decoration will be used, like Kamiya tiles.

1. Different characteristics:

Tooling tiles: The specifications of tooling tiles are generally relatively large. are more atmospheric.

Home decoration tiles: home decoration tiles are basically the opposite of tooling.

The specifications of home decoration tiles are generally small.

There are many kinds of patterns, and the decorative effect is fancy.

2. Different patterns:

There are various styles according to the preferences of the homeowner. The requirements for strength and thick bottom are not very high, so it is good to be able to use them.

There are not many fancy places such as tooling and tile patterns. The thickness and strength requirements are relatively high.

When buying tiles, pay attention to:

1. When buying tiles, you need to let the decorator calculate the number of tiles to be purchased. It should be noted that tiles are rather bought a lot, because different batches may have color differences, and ** may not necessarily be able to make up for the same batch. Merchants generally give you enough calculations, and you don't have to point it out.

2. When buying ceramic tiles, you should know that in fact, when we pay according to how much money each piece pays, divide the number of tiles to be purchased by dividing the area of tiles to be purchased by "the area of each tile".

3. The number of pieces is calculated for you when the merchant gives the warehouse order, and many merchants will round it off, and they will always lose it, so they should be able to be clear when buying. Buy tile purchase units are sheets, not boxes.

4. When receiving the goods, it must be clear whether the number of pieces is right, don't let the merchant tell you how many boxes in the abstract, you just stare at the number of boxes and ignore the number of pieces, and you will be confused, and it will be very troublesome to suffer at that time.

The ceramic tiles selected by the project are generally a large area of unified application, the first consideration is the overall beauty and generosity, the price ratio is high, suitable for various public occasions, the family ceramic tiles pay more attention to the needs of the individual living environment, the quality of the ceramic tile style and color are within the scope of consideration, belonging to the niche demand, the starting point is different, the need for things is not the same.

The people who purchase the tiles for the project may tend to choose the economical type, and the tiles for the family will choose the durable type.

The amount of engineering bricks is large, so generally speaking, engineering tiles will be lower than household tiles, and the quality is relatively inferior, so they will be separated from two types, but some big brands are relatively reasonable *****, so engineering and home decoration will be used, like Kamiya tiles.

1. Different characteristics:

Tooling tiles: The specifications of tooling tiles are generally relatively large. are more atmospheric.

Home decoration tiles: home decoration tiles are basically the opposite of tooling.

The specifications of home decoration tiles are generally small.

There are many kinds of patterns, and the decorative effect is fancy.

2. Different patterns:

There are various styles according to the preferences of the homeowner. The requirements for strength and thick bottom are not very high, so it is good to be able to use them.

There are not many fancy places such as tooling and tile patterns. The thickness and strength requirements are relatively high.

If you are in the north, it is good to use wooden floors, if in the rainy south, use tiles, in short, depending on the climatic conditions. Moreover, depending on the lighting, such as the first floor, do not use wooden floors. Although wood flooring is moisture-resistant, it still has a limit.

Ceramic tiles used in home decoration are generally more environmentally friendly, and formaldehyde in ceramic tiles used in engineering is higher, and long-term use has certain damage to the human body.

Ceramic tiles are divided into tooling and home decoration, but like gypsum board ceilings, the difference between tooling and home decoration tiles is relatively large and large.

Workwear tiles: aThe specifications of tooling tiles are generally larger, bare more atmospheric, cThere are not many fancy places such as pattern types.

d.The thickness and strength requirements are relatively high.

Home improvement tiles: home improvement tiles are basically the opposite of tooling, aThe specifications of home improvement tiles are generally small.

b.There are many kinds of patterns, and the decorative effect is fancy.

c.There are various styles according to the preferences of the homeowner.

d.The strength and thick bottom requirements are not very high, so it is good to be able to use it.

There is almost no difference in the manufacturing method, and if anything, it will not be due to quality:

1. The main difference is because it is a retail and a wholesale. Home tiles will encounter the problem of color difference in different batches, while engineering tiles are all in the same batch and will not have color difference.

2. The use of engineering tiles is specially provided to the construction party, there are two kinds of indoor bricks and outdoor bricks, outdoor bricks such as floor tiles used in squares, indoor bricks such as large engineering buildings such as shopping malls, hotels, banks, buildings, etc. Due to the large number of engineering tiles purchased at one time, it is cheaper than household tiles.

3. The size of the outdoor bricks of the project will generally be larger than the size used in the indoor family, and more attention is paid to anti-slip and anti-cracking than the appearance.

Special tiles for home decoration engineering, is it possible.

You can go to Ping'an Home Ceramics and you will understand.

1. Different raw materials: The common raw materials for the manufacture of hollow bricks are clay and cinder ash, and the general specification is 390 190 190mm. Floor tiles are made of clay firing. A variety of specifications. Hard, pressure-resistant, wear-resistant, moisture-proof.

2. Different characteristics: the total area of holes in the hollow brick accounts for the percentage of the brick area where it is located, which should be more than 15%. Compared with solid bricks, hollow bricks can save a lot of land soil and brick burning fuel, and reduce transportation weight.

There are many varieties of floor tiles, and there is a lot of room to choose from, which can be divided into glazed tiles, full-body tiles (non-slip tiles), polished tiles, vitrified tiles, etc.

3. Different uses: engineering bricks are used as the main material of the wall. Floor tiles can be used indoors.

Engineering bricks are generally low-quality general floor tiles, like this kind of bricks are generally used in public places, public installation can be installed once a year, and home improvement floor tiles are the pursuit of quality, home decoration is the last ten years may be reinstalled, so from the long-term perspective and quality perspective will be better than the tooling floor tiles.

Hello, the main difference between the two kinds of bricks is that the performance characteristics are not the same, if you choose engineering bricks, generally speaking, it represents hollow bricks, and it is also a wall material commonly used in the construction industry, the quality is relatively light, and the dust preparation type rises to the advantage of reducing raw material consumption, most of which are used in some public places If you choose home bricks, you can be wall bricks, you can also be ground tiles, and its specifications are still more, and the performance characteristics are relatively hard to achieve the effect. Pressure-resistant, wear-resistant, some bathrooms used for home brick repair, but also need to achieve moisture-proof, waterproof performance, and its material types are also many, their performance is different, but also lead to their use will be different, if the choice is engineering bricks, used to build the main wall of the house, the latter is mainly suitable for indoor floor brick repair used. Hope it helps.

The amount of engineering bricks is large, so generally speaking, engineering tiles will be lower than household tiles, and the quality is relatively inferior, so they will be separated from two types, but some big brands are relatively reasonable *****, so engineering and home decoration will be used, like Kamiya tiles.

1. Different characteristics:

Tooling tiles: The specifications of tooling tiles are generally relatively large. are more atmospheric.

Home decoration tiles: home decoration tiles are basically the opposite of tooling.

The specifications of home decoration tiles are generally small.

There are many kinds of patterns, and the decorative effect is fancy.

2. Different patterns:

There are various styles according to the preferences of the homeowner. The requirements for strength and thick bottom are not very high, so it is good to be able to use them.

There are not many fancy places such as tooling and tile patterns. The thickness and strength requirements are relatively high.

Now that science and technology are advancing, many things have been improving, for example, there are many types of floor tiles on the market now, many people may not know much about engineering bricks and home improvement bricks.

There is a difference between these two kinds of bricks in terms of use and use, and the home improvement bricks will be higher than the engineering bricks, because this kind of brick has a decorative effect, and it is very wear-resistant, pressure-resistant, and moisture-proof, but the quality of the engineering bricks is relatively ordinary, usually used in some public places, this kind of brick is light in weight and has few consumables.

Tips for choosing tiles for home decoration.

1. Texture, that is, the material of the tile, the feeling of different materials of ceramic tiles is not the same, and the effect of decoration is also different.

2. Aesthetics, when choosing the floor, it is also necessary to choose according to the overall decoration of the home, because there are many colors and patterns of tiles, it is best to choose the same batch of tiles, and try to avoid excellent poor appearance, which affects the overall appearance.

3. Quality, the quality of ceramic tiles is related to the life and experience of use, the surface of ceramic tiles must be smooth and flat, and there can be no unevenness, and the wear resistance and anti-slip performance should also be good.

What to pay attention to in tile construction.

1. Before laying, you must first read the product knowledge and instructions, check whether the model and color are consistent, and whether there is any color difference or other quality problems. Mu state.

2. Before laying, the tiles need to be soaked in water for half an hour, and then the water can be dried before construction.

3. The viscosity of the cement of the tile should be large, and the poor quality cement will affect the service life, and the thickness of the cement should not be too thick.

4. Pay attention to the reserved size, if you want to do beautiful seams, the size of the reserved gap should be the same, and each tile should be aligned.