Can you lay floor heating tiles in winter? 5

Floor heating can be done indoors, as long as the height of your room allows, you can directly lay floor heating on the basis of the existing ground, but your anti-height height can not meet the requirements, you must treat the previous ground with a height, but the ground needs to be leveled, so that it can be laid, and the floor tiles can be laid when the ground is fast dry after laying, and you can heat it after about 3 days.

No, because the paving floor must have pressure and water in the pipes to ensure that the pipes are straight and not deformed. Even if there is no water, it is difficult to drain the water in the pipeline because of the water test, and the pipeline will freeze during the construction process at such a low temperature.

OK! But smash open and redo!

It's troublesome, and you have to test the waters!

Do you have any decoration now, if not, you can do underfloor heating, and turn on the heating after laying the bricks.

You rock song good, there is floor heating in winter to pave tiles. Because the properties of ceramic tiles are relatively stable, it is not easy to change frequently due to temperature during use, and the deformation of the jujube beam, warping and other problems, coupled with its excellent thermal conductivity, so when it is opened, it will also heat up faster. But because the heat dissipation of tiles is also relatively good, if you want to keep warm, you need to choose carefully.

Pro, expand the information: in the process of paving the collapsed bricks, you should pay attention to: filial piety to the mortar mixed by the construction personnel to be properly dry, too wet is easy to appear out of the shirt you said hollow drums, cracks, when paving the floor tiles, sprinkle some cement slurry to increase the adhesion of mortar and floor tiles.

Summary. Is it good to lay tiles for floor heating in winter, dear! It is best not to open the floor heating is paved, and the general time of floor heating is cold in the winter season, and the time for paving tiles is not suitable at this time.

Because the ordinary ground of the tile has the situation of thermal expansion and cold contraction, there will be shrinkage joints when paving, which is convenient for the tile to have problems. If the floor heating is paved, it will affect the heating of the tile surface, and there may be bursting problems in the later stage. Generally, it is best to pave tiles in spring or autumn decoration, and it is best to pave tiles, I hope it can help you!

Is it good to lay tiles for floor heating in winter, dear! It is best not to open the floor heating is paved, and the general time of floor heating is cold in the winter season, and the time for paving tiles is not suitable at this time. Because the tiles are stupid and erect, there is a situation of thermal expansion and cold contraction on the ordinary ground, and there will be shrinkage joints when paving, leaving problems with large bricks with convenient porcelain tape yards.

If the floor heating is paved, it will affect the heating of the tile surface, and there may be bursting problems in the later stage. Generally, the best way to pave tiles is to decorate tiles in spring or autumn, and it is best to hope that it can help you!

Kiss, the heating has been delivered.

Have sent the heating to the pro cave or, hello! It is no problem to keep the ground temperature around 5 degrees, but in the end, Nagaiwu is paving floor tiles or floors, or depending on the preference of the pin, it can be paved, I hope it can help you!

It has already been decided to lay tiles.

Have decided to lay tiles pro, hello! As long as you keep the ground temperature at 5 degrees, it is no problem to lay tiles on top and bottom, I hope it can help you!

That is, the floor heating has been ventilated, and the ground temperature is high.

It is estimated to be at least 15 degrees or more.

Isn't it suitable for shopping?

That is, the floor heating has been ventilated, and the ground temperature is higher, hello! In winter, it is possible to pave floor tiles, and do not damage the geothermal pipes during construction. Generally, it will cause an impact, because the floor heating itself is laid under the floor, if the construction during the heating period, once there is an incorrect situation of the hole, the pipeline may be damaged, so that the pipe is easy to leak and answer the phenomenon, and there is no way to heat.

Hope it helps!

Isn't it suitable for shopping? Hello dear! It's not very suitable for paving, dear, but if you have to pave it, the scum is fierce. Try not to damage the geothermal pipes during construction. Hope it helps! Such as the bridge.

I want to ask if the temperature is too high, will it cause the tile to crack.

If the temperature is too high, will the guide hall burn and cause the tile to crack, hello! The temperature of the heating house in winter will be very high, so that the leaky key tiles will expand, there is no gap between the tiles or the gap is small, it is possible to make two adjacent tiles expand in the gap after the porcelain collapses and cracks, I hope it can help you!

1. After laying the floor tiles, wait for at least a week to turn on the floor heating. Due to the adhesive of the floor tiles.

Generally, it is cement or cement, and its forming and hardening speed has a great relationship with the temperature, which also needs to be judged according to the weather conditions.

2. After paving the floor tiles, the cement can be hard in about a day, but it will not be too strong, and it will generally take about a week to reach a relatively strong hardness. Turning on underfloor heating during this week is not conducive to the hardening of cement. Turning on underfloor heating makes the floor too hot, which will evaporate the moisture of the cement, which will cause the floor to hollow.

Floor tiles can be laid when the floor heating starts to be heated, but you should pay attention to the process of laying bricks

1. The mortar to be mixed by the construction personnel should be properly dried, and if it is too wet, it is easy to appear hollow and cracked.

2. When laying floor tiles, sprinkle some cement slurry to increase the adhesion between mortar and floor tiles.

3. After 24 hours of paving, you can sprinkle water on the floor tiles for maintenance.

Floor tiles are not recommended. At this time, the heating temperature is in a constant state, and the actual temperature of the pipes may exceed the temperature of the normal climate state. It is easy to cause cement cracking.

Floor heating can be paved with floor tiles. Floor heating can be paved with floor tiles or floors. The order of thermal conductivity of the floor laying materials is as follows: floor tiles, laminate flooring, laminate flooring, and solid wood flooring. However, the floor tiles should be covered with cement, and if they are repaired, they should be knocked off.

However, the kitchen and bathroom floor should be wet to avoid water seepage, and dry paving can reduce the hollowing rate more than wet paving, but the cost of dry paving is higher than that of wet paving (in fact, it mainly involves a problem of sand and gravel ratio).

Generally speaking, dry paving has high technical requirements, mortar thickness, so that the cost is high, of course, the floor tiles after dry paving are regular, not deformed, not easy to hollow drum and line edges are flat, the effect is good, so the floor tiles should be dry paved.

Generally, not. However, the temperature next to the separator will be affected if it is too high, during which the temperature can be adjusted to a low level, and the original temperature will be restored after the sewing agent is dry. I hope my answer can help you.

Yes underfloor heating is about 50 degrees of water and has no effect on the material.

The underfloor heating itself is laid under the floor.

During the floor heating period, lay floor tiles, if you knock on the ground and re-lay the floor tiles, then you can't, once the floor heating pipes are damaged, one will leak, and the other is that you can't continue to heat; The third is to affect the heating effect of the ground, the floor heating itself needs 2-3 days to heat up when it is turned on for the first time, and it takes 2-3 days to re-pave, cement, sand, etc. are wet, consume more heat, and heat up more slowly;

You can wait until the heating period is over to consider;

Sand has requirements: sand head (gravel) must be used

Floor tiles are not required.

Normal cement will do.