When decorating a new house, which season is the best time to til? The reason?

Tiles are most suitable for laying tiles in late summer and early autumn, because at this time the temperature has begun to gradually decrease, and the daily temperature is around 20 degreesPrecipitationRelatively little, indoor ventilation is good。Laying tiles usually needs to find the right season, otherwise it will affect the overall decoration quality and decoration time. Many people don't understand the details of this, which leads to a slow renovation progress and easy problems during use.

In winter, because the temperature is low, it is not suitable for tiles, and you must know that the temperature will have a certain impact on the tile laying material. If the temperature is too low, the setting time of the tile paste material will be relatively prolonged, and if the room temperature is lower than 5, it will even cause the laying material to fail to solidify normally. Even if you barely put it on, it will fall off, wasting energy and decoration materials.

In general, the temperature required for laying tiles is about 5-30 degrees.

Many people may think that the temperature in spring is suitable for laying tiles, but in fact, it is not the case, you must know that the biggest disadvantage of spring is that the whole is more humid and cold, especially in some humid southern cities. Due to the high humidity, the tile adhesive material will not be able to set properly. It is not suitable to arrange tiles in summer because the temperature is too high, please work efficiently of workers.

It will go down, and it will not be the best if it is not the effect. Because the moisture in the adhesive material will evaporate rapidly, the strength will also decrease, and the subsequent use may cause hollowing.

What's more, many cities enter the rainy season in June and July.

Neither the humidity nor the temperature meet the requirements for laying tiles.

So the best season is in late summer and early autumn, when the temperature is not too high, usually around 20 degrees, and workers don't feel stuffy when they work. The rainy season has long passed, and there is no large amount of moisture in the air, so both humidity and air currents are very suitable for the needs of tiling. It can be seen that laying tiles is also very particular, and you must find the right time.

It is more suitable to lay tiles in spring and summer, because the temperature in these two seasons is relatively high, the weather is relatively dry, and it can dry quickly after laying tiles.

Personally, I think summer is the most suitable; In the summer, the wind is strong, and the ventilation can be faster, so that the tiles can dry, and the weather is also hot, so that the tiles can have better adhesion.

I think when decorating a new house, spring and autumn are the best time to lay floor tiles; Because it avoids the wet summer and the cold winter, it also avoids the thermal expansion and contraction that physics says.

Because I am engaged in the construction industry, so I still have a certain understanding of the decoration of the house, in my opinion, the decoration of a new house is mainly concentrated in the spring and summer tile paving is generally mainly concentrated in the spring and summer at the turn of summer. So judging from the time of day, it is best to choose to lay tiles at the end of spring. So today, let's talk to you about what time details need to be worth our attention when decorating the house.

First, why focus on spring and summer?

In fact, the reason is very simple, on the one hand, because in spring and summer, there are more workers at this time, after all, the weather is colder in winter, and workers often choose to spend the Spring Festival. I want spring, many people come out to look for work, at this time there are more people, you can complete your work quickly, and the most important thing is that the temperature in spring and summer is more suitable. For decorating a house, the use of various materials does not need to consider too much about the influence of temperature.

Second, the impact of spring on tiling.

In fact, under normal circumstances, the tiles are carried out in the house, so the impact on the temperature is not too serious, if it fails, and then lay the tiles on the ground, it may take into account the evaporation of water, resulting in the drying of the mortar below. If you do it in the room, you won't worry about this problem, so the reason why you choose to lay tiles in spring and summer is mainly from the general direction considering that spring and summer are the concentrated period of decoration, and at this time the tiles are just in the middle of the decoration. <>

Third, how to choose a good decoration master.

For many decorators, there must be a bloody lesson, that is, choosing a good decorator can save a lot of trouble, because most people choose a decorator when they are looking for some temporary workers on the side of the road, and once they finish the work, it is basically difficult to find them. Therefore, once there is any quality problem, you need to solve it yourself, which is very troublesome, and you must find some more reliable maintenance workers.

When decorating a new house, it is better to lay floor tiles in spring or autumn, the air during this period is drier, easier to dry, and the temperature is more stable.

It is best to lay tiles in autumn, because the temperature in autumn is relatively comfortable, and the temperature is not too high, so it is suitable for tiling, and laying tiles at this time can also make the tiles stick more firmly.

When decorating a new house, it is best to choose to pave tiles in autumn, so the effect is very good, because the adhesive ability is particularly strong, not easy to fall, and it will not be because of the season, the temperature is moderate, neither cold nor hot, so it will fall down just bad.

It is best to lay tiles in winter and autumn, the temperature in these two seasons is more suitable, and the tiles will not be hollowed out due to excessive ventilation.

The best effect of tiling in the summer is because it will allow the mud behind the tiles to dry quickly, and it will also be faster to see if there is a problem with the tiles.

I don't have a room, I'm worried.

In my opinion, when renovating a new house, the main thing is to gather floor tiles in the spring and summer.

The paving is generally important to gather at the turn of spring and summer. Therefore, from the perspective of this time at many levels, it is best to choose the end of spring to lay tiles. So let's discuss with you below, in the case of house decoration, what are the small key points in time that must be very, very worthy of everyone's attention.

First, why is it important to focus on spring and summer?

In fact, the reason is very simple, on the one hand, because in spring and summer, there are more employees at this time, and the temperature is very cold in winter, and employees generally choose to spend the Spring Festival. I think in the spring, many people come out to find work to do, at this time the workers are more sufficient, can quickly complete their own work, and more importantly, the temperature in spring and summer is more suitable. For the decoration of a new house, the use of various materials does not need to fully consider too much temperature damage.

Second, the damage of spring to tiling.

In fact, under normal circumstances, the floor tiles are all carried out in the house, so the damage caused by the temperature is not too serious, if it fails, and then lay tiles on the ground, it is likely to take into account the evaporation of water, resulting in the drying difficulty of the mixed mortar below. If it is carried out in the room, it will not worry about this problem, so it is often chosen to lay tiles in spring and summer, the key is to consider that summer and autumn are the dense links of house decoration in the direction, and at this time the tiles are just in the middle node of house decoration.

Third, how to choose a good decoration master.

For many people who decorate houses, there is no doubt that there is a bloody lesson, that is, choosing a good decoration master can save a lot of trouble, because the vast majority of people choose the decoration master, all of them are looking for some temporary workers on the road, and once they carry out the work, the vast majority of them are unable to find them. Therefore, once there are a lot of product quality problems, we must solve them by ourselves, which is also very complicated, we must find some more reliable machinery and equipment maintenance workers outstanding talents.

I think it's better to lay tiles in the spring, when the staff have plenty of time and it's not as hot as in the summer.

I think it is best to lay tiles at the end of summer, because the climate is relatively good, and the humidity and dryness are just right, and the effect of tiling will be very good.

I think it's best to lay tiles in the autumn because the temperature in autumn is more suitable, and the climate is drier, so it's easy to dry.

In general, the principle of purchasing ceramic tiles is: one look, two listens, three drops of water, and four feet.

How to choose tiles.

First, look at the appearance. The color of the tile should be uniform, the surface finish and flatness should be good, the surrounding rules should be regular, the pattern is complete, and four or five pieces should be extracted from a box to see if there are defects such as color difference, deformation, lack of edges and corners.

How to choose tiles.

2. Listen to the sound. Tap with a hard object, the crisper the sound, the higher the degree of porcelainization, and the better the quality. You can also use the thumb, index finger and middle finger of the left hand to clip the corner of the tile, hang down easily, and tap the middle and lower part of the tile with the index finger of the right hand.

Now many miscellaneous bricks can also sound crisp, and they need to be more professional to identify).

How to choose tiles.

3. Drip test. You can drop water on the back of the tile to see how fast the water soaks after it spreads, generally speaking, the slower the water absorption, the greater the density of the tile; On the contrary, the faster the water absorption, the sparse density, and its intrinsic quality is superior. (Tests cannot be measured in terms of surface application.)

The smooth surface does not absorb water, it is likely that there are more antifouling agents and waxes on the surface, and the bricks do not absorb water, which will be very slippery and unsafe).

How to choose tiles.

Fourth, the measurement. The higher the accuracy of the side length of the tile, the better the effect after paving, and buying high-quality tiles is not only easy to construct, but also can save man-hours and accessories. Use a tape measure to measure whether there is a difference in the size of each tile, and the high accuracy is the top grade.

How to choose tiles.

5. Observe the hardness. Ceramic tiles are of good hardness, strong toughness and not easy to be broken and rotten. The edges and corners of the tile fragments are scratched on each other, and the broken fragments are inspected to see whether the broken parts are fine or loose, whether they are hard, brittle or soft, whether they leave scratches, or scattered powder.

If the tile is not well purchased, it is easy to cause the tile to be hollow, which may be a problem with the level of technicians, but it may also be a problem with the tile itself, as well as the use of cement mortar. Therefore, in order to avoid tile hollowing, it is first necessary to choose the right tile products and cement mortar.

1. Avoid excessive water absorption of ceramic tiles.

When choosing and buying ceramic tiles, we need to pay attention to the water absorption rate of ceramic tiles. Place the water droplets on the back of the tile and see how quickly the water soaks after it disperses. The slower the water absorption, the greater the density of the tile.

The faster the water absorption, the smaller the density of the tile and the higher the water absorption. When choosing tiles, it is necessary to choose a product with a water absorption rate that is within the standard range. The water absorption rate is too high, and it is easy to expand and absorb water after use, causing the hollow drum to fall off.

The hollow drum caused by the excessive water absorption of the tile generally falls off the edge, often accompanied by small, circular crack defects on the surface of the tile. The responsibility for this kind of tile hollowing is mainly in the manufacturer, not the construction unit.

The choice of tiles for the decoration of the house.

Second, avoid the back of the tile texture is too shallow.

In order to fit closely with the wall, the back of the tile will usually be designed. When the particles are deep, it can ensure that the ceramic tile and cement mortar layer will not fall off when local segregation occurs. Therefore, it is better not to be too superficial and too simplistic.

Third, the choice of cement.

At present, the cement produced in China generally has No. 225, No. 325, No. 425, No. 525 and so on. The production of different grades of cement should meet the production needs of different grades of concrete. The cement used for home decoration is generally selected No. 325, because the cement used for decoration does not need to bear too much force and does not need high-grade cement.

In addition, the quality of the cement must be carefully determined and the selection of inferior cement must be avoided.

Fourth, it is best to choose sand for sand.

Sand can generally be divided into four types: ultra-fine sand, fine sand, medium sand, and coarse sand. Generally speaking, the thicker the sand, the higher the strength of the cement mortar, but if the strength is too high, it will also lead to some undesirable consequences, such as cracks when leveling with sand.

However, sand that is too fine is not enough to adsorb and not create a large amount of friction to adhere to the tile. Therefore, it is recommended to use medium sand in home installations, the particle thickness of medium sand is very suitable for use in cement mortar, and the particle size is or.

Fifth, the ratio of cement and sand should be appropriate.

In home decoration, floor tiles are usually laid dry. At this time, cement sand is mixed with a small amount of water in a ratio of 1:3.

Wall tiles are generally wet paved, and the ratio of cement and sand is mixed in a ratio of 1 to 2, and mixed with water. If the proportion of cement mortar is too high, it will lead to excessive water loss after drying, resulting in hollow floor tiles.

Tile paving auxiliary material - sand.

The above is the tile selection method I introduced to you and the place to pay attention to when decorating the construction, these methods are generally used by big-name decoration companies, and small decoration companies due to cost control and other reasons, will not necessarily be in accordance with the standard to build, at this time decoration friends can be careful