The brains on both sides of me are caved in, what s going on, they re sunken in. What to do

How many of you have collapsed on both sides? If it's just a slight depression, it's not a problem, and you can't see anything if you have hair, but if it's a very obvious depression that can't be concealed by hair, you can recall: how long has the depression been, is it congenital?

If it is not congenital, is it caused by surgery after trauma?

If it is congenital, depending on the degree of depression, if it is really obvious, orthopedic surgery can be considered, which is to put a titanium mesh above the skull in the depression.

Of course, the congenital depression should not be too obvious, if it is because of a major head trauma, due to intracranial hematoma removal caused by the skull defect, please consult the local hospital, elective skull defect titanium mesh repair, because skull defect will cause a series of complications, it is still necessary to do titanium mesh repair as soon as possible. Hope!

I feel very old when the temples are sunken, it is recommended to massage your temples more, usually if you are fine, massage and massage, you can apply a little Kashiwa Hall in the temples when massaging, and then relax the massage, usually to maintain a good work and rest time, try not to stay up late, and eat regularly. Sticking to it for a while will make a difference.

This is innate, if there is no abnormal sensation, it should be a normal phenomenon, don't care,

That's a hollow temple, just fill it in.

Hello! Squeezing it with your hands is unnecessary and unhygienic, and it is easy to leave a scar on the **.

If there is a small hole after squeezing out the acne, please don't worry, the skin will recover automatically; However, it is recommended that you clean and hydrate during the period to avoid new acne blackheads.

If the scar is left behind, it will not fade in a short period of time, and it is necessary to promote its metabolism and loss through proper massage and facial compress. Or you can use some good quality whitening products to cover up and improve the condition of the scar.

Washing your face with salt once a day, morning and evening, can fix it** to solve this problem. I used to be taught by doctors like this. Stick to it for two weeks and it will be fine, don't squeeze because there are bacteria on the hands, otherwise it will cause bacterial infection to the wound. Believe me.

If you don't have a scar constitution, don't move it anymore and take your time to get better. If you have a scar constitution, it is recommended to apply a little aloe vera gel.

The mattress you see is the kind of garbage mattress that you don't recommend you to continue using. First: It's not good for the spine. Second: the mattress is likely to be broken, and it is easy to puncture the body. Third: not environmentally friendly. Where are you?

Talk to the landlord to see if you can change it, if you can't, you have to stop sleeping, there is no way.

The concave in the middle of the audio speaker will affect the sound quality, it is best to get it out, and the operation method is as follows:

1. Find a roll of adhesive tape with a lot of stickiness and cut a small section as shown in the figure below, not too long and not too short.

2. Gently stick half of it in the middle of the recessed horn, and put the other half of the adhesive tape on your hand and gently pull it up.

3. As shown in the figure below, the middle part of the horn has been pulled up and restored by this method.

4. There is another way to find a thin needle, the thinner the better, gently insert a little into the recess of the speaker and pick it up.

5. As shown in the figure below, the recess of the speaker has been picked up by the needle, be careful not to insert it too much, it is easy to damage the speaker.

1. Transparent adhesive tape.

Stick transparent tape to the recessed place of the dust cover, and then pull the transparent tape vertically, while gently pressing the unsunken place on the edge, pay attention to control the strength, and repeat the test several times, which is the easiest and most convenient way.

2. Hot melt adhesive.

Use hot melt adhesive to point a little in the middle of the recessed dust cover, and gently pull it up after the glue cools, which is basically OK, and then slowly buckle off the glue when it is finished, This method is suitable for serious dents. (Note: The hot melt adhesive can be heated to soften, not heated for too long, otherwise it will stick to it and cannot be removed.)

3. The self-adhesive of the express order.

The reverse side of the fourth copy of the express bill is self-adhesive and very sticky. You can take the fourth joint and cut it into small strips, and slowly pull out the dust cover. (Note: Why not cut it into large strips, mainly because too much self-adhesive sticks to the dust cover, which affects the appearance and is difficult to clean.) ）

4. Thin needle piercing.

Theoretically speaking, the dust cap does not affect the sound quality, and you can use a small needle (such as a pin) to pass through the dust cover a little bit, and gently pick it, especially suitable for the dust cover with high hardness, mind the appearance of the cautious use.

5. Disassembly and restoration.

Use sol solution to melt the glue of the horn dust cover, remove it, pick it off with a scalpel, restore it to its original state, and then glue it back with white latex or special glue. This method is more professional, the technology is not good and it is easy to break the paper pot, it is best to hand it over to professionals for processing, or it is possible that the gains outweigh the losses.

The methods of copying the answers on the Internet are pure. My Aiken monitor dust cap somehow made that friend accidentally push the whole thing in, and since then I feel that this one has a different tone than the other, and I always have to turn up the volume a little bit to balance. It's very worrying!

Recently, I found out that the cap was recessed. I consulted online, tried several methods, and it was difficult for the tape to stick to the cap (which is generally smooth), let alone pull it out. Or local materials, some small pendants on the wall at home with small suction cups, soaked with water, repeated several times, most of it came out, and then gently pushed with your fingers, and the whole came out.

It's probably better to have a small suction cup smaller than a dust cap, but I'm a bigger one, and it took me a few times to get up. I feel that the timbre is much better now, and I hope it will be helpful to listeners who have this problem.

The circle in the middle of the horn is a dust cover, and if it is pressed in, it can be glued out with scotch tape or picked out with a thin needle.

I just used a very stupid way ......The vacuum cleaner does not use a suction head, but directly turns the round pipe on him to the maximum suction, slowly approaches, and immediately turns off the vacuum cleaner ...... when it is sucked out

With a vacuum cleaner, it will be sucked out at once.!! With a vacuum cleaner, suck out the !! in one second without damage

This one is generally more difficult to get out because its material is less elastic, just like it is difficult to get it out again when you press a concave water bottle. I guess you accidentally got it dented, right? If it doesn't affect the sound, just use it.

You try to use the headphones behind the host, if the headphones are good, then the problem is in the line connecting the host and the audio, the following is the way to use the headphones in the state that is not easy to use If the headphones are not easy to make you double-click the small speaker on the taskbar, the waveform may be muted or the smallest sound state, then adjust the waveform to the maximum, if not, it may also be a problem with the sound card, use the driver, re-drive, if it is not good, the interface behind the system is a little problematic, It may be a bad contact, You can plug it in and rotate it, or plug it in and out several times.

If you get it done, there is also a mark, and if it is ugly, find a convex one and stick it with glue to modify it, or paste a layer of sticky cloth on it.

If it is not very concave, you can gently rush over from the edge with a change cone; If it is very concave, you can only remove the horn paper and re-glue it after it is finished.

3m double-sided tape, try to stick to the depression, try to fix the tweeter when lifting, and pull it up, but the surface is always uneven.

It will not affect the sound quality, you can pick it out with the tip of a needle, and then stick the eye of the needle with transparent glue.

Stick the center of the horn with transparent glue, and then pull it outward, which can generally be restored.

I sucked it out with a cupping device