What should I do if the bamboo skewers always stick through the clay?

If the bamboo skewers always put clay plugs, then you can consider changing to a different type of clay, or changing to a shorter bamboo skewer, and be careful when inserting them, and insert them slowly.

You can get a little cotton or tape on the bamboo skewer or something, the knowledge you have learned is limited, and the language expression skills are average, but you have tried your best to go, I hope it can help you!

The only way is to wait for the clay to dry before wearing bamboo skewers, because the bamboo skewers are sharp and the clay also has weight, so it will definitely be inserted, and when the clay is almost dry, it will not be inserted.

Always after the clay has been rubbed through, you can shave them with bamboo skewers a little and then make them shorter.

Bamboo skewers always wipe the clay through, what should I do? This problem is really not very good, I don't know the purpose of you using bamboo skewers to insert clay, if you want to engage in artistic modeling, you can change a shorter, bamboo skewers, so that the effect may be a little better!

This should require some adhesives, such as glue and the like, you can try to see it, and it also needs to work.

In this case, it means that the clay is not hanging on the bamboo skewers, and it is better to get a small hook.

In the past, if you always had a bad year, you could slow down. Don't use your hands to be smaller. So that there will be no plugs.

If you want to do this, I think you can add some printed g to the picture.,It's not easy to insert it.。

Bamboo sticks, inserted in the soil, must be able to penetrate, this depends on what you tie, if it is tied with that plastic or paper, then it is very good.

Control the force and don't push too hard.

Soccer balls always rub the clay through, what to do? What to do? You can remove the tip of it, and that's it.

If you always use clay plugs on bamboo skewers, don't make the sharp tip of the bamboo skewers so sharp.

Then you probably because the clay is too soft according to you, that's why it's like this.

Born always reveals her at the beginning of the year, what should I do? Then you tell him to check, he should have him out.

Chi always rubs the clay through, what to do? You can ask a professional or a friend about this.

Personally, I think the overall ** control is good, the graphics card can consider the GT460, and the chassis can consider the Warriors.

What model is the graphics card? I checked 550 and 560 all of them.

In short, it's black.

What is the power supply for? 450w is completely sufficient.

Except for the graphics card, everything else is good, there is nothing to pick, it belongs to the low- and mid-range configuration.

That HD5500 graphics card is not a mainstream product, it is recommended to replace it with more than 400 HD5550 or more than 500 HD5670.

The whole machine is 400 + 400 + 450 + 160 + 260 + 120 = about 1790 yuan, plus the power supply of the chassis is about 300 yuan, and the display is not found to be how much it is, probably plus more than 1,000. , 85pja hope it helps you.

You'll also need a discrete graphics card for this setup.

Config OK **Slightly a little bit high.

If you don't know anything about it, it's hard to understand, and when we take classes, some people who don't understand computers at all won't understand it, because there are a lot of computer-specific terms and concepts involved! If you don't know anything about hardware, it's hard to understand! Of course, it is also possible that it is said deeply!

I don't quite agree with the upstairs method, if you can't even understand the theory class! Hands-on practice is all about fooling around! It's like destroying a computer!

If you're interested, you'll be able to understand it at once.

More than 300 kb of thunderbolt is already very good.

Whether it is Netcom, China Telecom, or Tietong, each household is given very little bandwidth.

It's okay to clean up the machine, it is recommended to use Windows Optimizer!

Clean up the garbage. It might be better.

First determine whether your computer is telecommunications or Netcom, if it is a telecommunications Internet connection to play games, of course it will be slow (or vice versa) After finding a good line, turn off the software that accounts for traffic such as Thunderbolt when playing games.

It could be a network problem!

What platform are you playing on???

msconfig--boot--advanced options--select the maximum number of memory, change it to 16384MB....

Win8If you have 16G memory, just turn off the virtual memory.

Let me tell you that I also studied computer network direction when I was in school I have already obtained a network engineer certificate much ** is not bad in a big ** also did the background But what makes me sad is that now it is really difficult to find a job to learn computer is to find a poor job with a low salary like you are still a junior college It is even more difficult to find a job It is recommended not to take any certificate It is useless It is a waste of time and money Improving their overall quality is the most important thing There are many people in our class who have obtained a network engineer certificate Software engineer certificate But in the end, there are a few jobs that find professional counterparts, and now it doesn't matter what you learn, what matters is your ability, and what you learn in school is difficult to use in the workplace.

Of course, the software is better than the hardware. If you're not comfortable with software, but you're not proficient in hardware, my advice to you is: learn something, such as graphic design, PS technology and other practical techniques.

I just graduated from college with a bachelor's degree in information, and I get a salary of 2500 in a big city, and now I quit my job to study design and PS, but I have analyzed the pros and cons for a long time, I hope it can help you.

Overall, hardware is better than software! The development of computer networks is relatively fast, and the monthly salary of new programmers is about 15000! It is recommended to learn more basic things, and the foundation is very important for the future development of the discipline of computer! As for the certificates, the strength is enough, those are simple!

It's so annoying! Fortunately, I didn't study that major.

It's much more useful to learn something tangible than to get a certificate that's useless.

Most of the blue screens are caused by driver issues, and the safe mode boot environment will only load some necessary system files and drivers, which can rule out the influence of third-party software or drivers.

If there is no blue screen or infinite reboot in safe mode, then it can basically be judged that it is affected by third-party software or drivers, and we can uninstall them one by one to troubleshoot.

Workaround: Open Settings > Update & Security > Recovery > Click "Reboot Now" in Advanced Startup

Click on "Troubleshooting".

Click on "Advanced Options".

Click on "Launch Settings".

Click "Restart".

Press F4 to enter safe mode.

Once in safe mode, select "Device Manager" from the start button, right-click menu

Find the graphics card and disable it or uninstall the graphics driver in the context menu.

Computer Blue Screen Reason:

1. The newly added hardware equipment is not compatible with the old or loose or other incompatible hardware is inserted;

2. During the computer networking, the Trojan virus was infected and an incompatible driver was installed;

3. The virtual memory set by the computer is insufficient;

4. The hardware settings are overclocked;

Computer Blue Screen Solution:

1. Check and replace incompatible hardware, or use back the original accessories;

2. Select the system with the right hardware and reinstall it;

3. Install the physical memory size of the computer, reset the virtual memory and select the location;

4. Reset the normal operation frequency of the hardware.

Reinstall the previous system win10 is really too stuck and not easy to use.

I recommend reloading it again, as I did before, and I took it and reinstalled it again.

It could be that the system files are missing, corrupted, or there is something wrong with the hardware. Turn on the power, press F8, use the up and down keys on the right to select the most recent way to work, and see if it works. If you still reinstall the operating system left and right, there is a problem with the hardware, clean up the dust inside, unplug the memory module and reinstall it.

There are many reasons for the blue screen, if you reinstall the system and this situation, it may be that the motherboard is broken, or it may be that the wiring is not strong.

Also look for a store that sells you a computer during the warranty period.

Take it to repair, the hardware is broken, it should be the motherboard.

Reinstall the driver or system !!

Compatible with the problem...Specifically, it takes a blue screen**.

Take it to the after-sales service, the blue screen generally has hardware problems, and there may be more problems with the hard disk, so you can only take it to the repair computer for testing. Computers have a 1-2 year warranty, and it is more convenient to take it directly to Lenovo after-sales.

I use an EP6800 printer, the driver has been installed correctly, and the printer can be used normally, but every time I turn on the machine, new hardware is found, and the driver is automatically installed. I also thought of a lot of ways, but I can't solve it, please help Lenovo technicians solve it, thank you.