How to make the subsoil of the cricket jar, how to make the cricket jar

The method of making the subsoil of the cricket jar is as follows:

1.The preparation materials, including hydrated lime to soil, are 1:1, and the sand particles are coarse and fine, according to the coarseness, plus the water content, basically according to the ratio of 2:2:1.

2.Stir the various ingredients with rice juice until they can be crumpled into pieces.

3.Wash the jar and wipe it clean with a cloth.

4.According to the specific shape of the jar, it is decided whether a layer of white glue needs to be added to fix it, strengthen the viscosity, and make it not easy to fall off.

5.Smash the bottom and create a pattern to protect the cricket's claws from holding firmly.

The above is a method for making cricket jar subsoil for your reference, please adjust the specific operation according to the actual situation.

The cricket jar subsoil should be paved with clean sand first, first put the river sand.

Pick it up, and later, wash it and dry it in the sun. Let the sand dry thoroughly if now the sun is shining.

If it's not good, you can also put it in the microwave to heat it up and let the sand dry. If you are in debt, then find clean soil and gently apply it to the sand, so that the soil will become dry and soft, suitable for living.

How to make cricket jar subsoil? In fact, this is very simple, you just need to go to the field to dig a little fresh yellow clay and put it at the bottom of the jar.

1. Prepare a pencil, glue stick, colored cardboard, scissors, awl, canned bottle, change cone, and shovel.

2. In order to ventilate the cricket, use an awl to pierce holes on the top of the lid and prick many small holes.

3. Draw many crickets on colored cardboard with a pen.

4. Stand the colored paper next to the glass bottle and measure the height of the cut.

5. According to the required height, use scissors to cut off the pattern part of the colored paper.

6. Use a glue stick to glue the cut colored cardboard around the bottle and stick it tightly. Sticking colored cardboard, one is for beauty, and the other is for shading.

7. Then go to the flower bed, use a small shovel to shovel off the gravel on the surface, and dig the moist colloidal soil below.

8. Shovel the dirt into the bottle and pick out the stone particles and small tree roots, which are about one-fifth the thickness of the bottle, so that the crickets have enough space inside.

9. Use the wooden handle to hammer and flatten the soil inside.

10. After the hammer is done, close the lid, and the sharp cricket jar is ready.

The production of ancient cricket jars in Chengni needs to go through dozens of processes. First of all, the excavated river mud is placed in a silk basket and filtered, (the ancient mud method is to hang a special double-layer silk bag in the river, and the sediment wrapped in the river water flows into the silk bag, and after being filtered by the first layer of silk bag, the fine mud that sinks into the second layer of silk bag is clear mud.) With the change of time, the flow and velocity of the river have changed greatly, and it is no longer possible to completely follow the ancient method.

The extremely fine soil filtered out is the raw material for making cans, clear mud. This is where the name of the mud cricket jar comes from. Then the filtered mud is placed for more than a year, and its dryness can be used only after winter and summer.

The mud jar is "taken from water and made from fire". This can be traced back to the alchemy of Chinese Taoism: taking mud from water is like crude medicine, and forming a pot in fire is like a pill.

At present, Shandong cricket cans follow the ancient method at the same time, and the machine is unique, the use of modern scientific and technological means to innovate, in the process of refining mud, the purchase of mechanical equipment, with electricity as the power to replace the original manual operation; The result of this is to strengthen the density and hardness of the tank, and to make the mud tank not produce any bubbles and micro-cracks when firing. Generally, the density of the mud tank is about the same, and the current modern technology is used to increase its density to about the other, which increases its usability and suitable air permeability.