What do you need to pay attention to when installing faucets in the bathroom? Do you know?

Under the wall and the ground, it is used as little as possible or does not need to connect accessories, and the eldest daughter's house is only installed with one and the other is not installed, and the uninstalled bathroom is really a little smelly! It doesn't stink, anyway, the air smells like a closed little waterway! This reduces the risk of leakage and ensures that the fitting is installed securely and without leakage.

Whether the water pipes and connecting fittings required by the road are damaged, sand holes and cracks, and the relevant parts of the water pipe should be replaced in time if the problem is found. Dig a trench and do a waterproof and closed water test before bonding the sewer pipe. After the joint glue is dry, the flush experiment can be, in case of slight water leakage, most of the time after a long time, the scale and dirt will be re-blocked, and it will not affect the roof downstairs.

Sewer pipe installation is an important part of it, today I will introduce you to the installation of sewer pipes, the bathroom should pay attention to ventilation, the bathroom in the whole home is the most damp, the place where moisture is gathered, so ventilation is very important, in order to prevent the bathroom from moldy, you can install an exhaust fan, so that you can learn from it in the decoration process.

The overall is waterproof, location, pipe diameter, slope, short distance, return design, anti-odor design, toilet selection, floor drain design, waterproof treatment to be thorough, to be careful and careful. The waterproofing of the floor drain should be pressed against the upper mouth of the floor drain to brush inward, and the pipe pipe should be fixed after confirming that there is no leakage, and the nozzle should be closed to prevent the follow-up work from falling into the debris into the sewer pipe! Otherwise, it is troublesome to deal with water leakage.

That's all I know, as far as I can see.

The size positioning of the sewer nozzle must be accurate, and the specific positioning should be based on the specific positioning of sanitary ware of different specifications, and there should be no deviation too much. Otherwise, sometimes the bathroom needs to be connected to the water, it will be more troublesome, if the bathroom has a mop pool, a washing machine, but also to install one, for everyone's normal use.

If you want to increase the faucet distance, and then go to the corner of the wall to the place where you install the faucet, so that you can reduce the damage to the decorated structure, you can only add a tee joint on the pipe, and then install the faucet according to the need.

Iron should be used when installing, the sluice should be closed, and the installation should be done well, carefully, and not to make mistakes or mistakes for the sake of speed.

I know that for the installation of bathroom faucets, we only need to connect a cold water pipe, and the faucet is fixed on the wall, or fixed on the sink, and then the faucet can be installed and fixed.

You know, you must pay attention to the size, pay attention to the length of the installation, whether it can be used well after installation, whether there will be other problems, it is best to choose a relatively strong faucet for installation.

During the installation process, take out the newly bought faucet and check whether it is complete. Then check whether there is dirt on the end of the wash basin to avoid clogging the faucet after installing it. The gasket is used to relieve the pressure where the metal comes into contact with the ceramic.

Therefore, first thread the washer to a water pipe, then thread the hose of the water inlet through the threaded fitting, then thread the second hose into the threaded fitting, and finally fix it with a nut.

The selection of faucets mainly considers the following aspects: first, to see whether it is a single cold or hot or cold, a single cold below a water inlet hole and a thin vertical rib below, and two hot and cold water inlet holes: one cold and one hot, and the lower vertical rib is thick.

Second, see whether it is under the water or side water. Third, it is to choose a good material for durability and corrosion resistance, and a pure copper core should be chosen. Fourth, there are many kinds of appearance styles, choose according to your preferences.

The environment of the bathroom is inevitably damp, the faucet needs to be a little bit, there is a washing machine hose, the toilet needs to have a triangle valve, the wash basin is a mixing valve for hot and cold water, if space allows, install one more, and the washing machine faucet is used separately, you can use a bucket to catch water or others, the shower set for bathing has three gears and four gears are also good, but the bathroom is mainly divided into two categories, one is the wash basin faucet, and the other is the shower shower. The most important indicators of the faucet are the quality of the surface plating, the quality of the spool and the material of the faucet. We ordinary people can't distinguish the quality of each indicator in detail, so the easiest way is to choose a trustworthy big brand, such as the top ten domestic brands Wrigley, toto

Jiumu and so on. > The faucets to be used in the bathroom are mainly shower faucets, which are generally used with high-hanging shower faucets, which are composed of top spray, hand-held showers, shower chains, lifting rods, and faucet bodies; The process of pure copper is divided into two processes: gravity casting and red punching. The quality of the red punch will be better, but **high; These two kinds of faucets can be distinguished from the inner wall of the faucet, the inner wall of the red punch is smooth, and the inner wall of the cast is rough.

In addition to practical functionality, in recent years, with the improvement of living standards, the demand level for the pursuit of taste and texture of life has also been valued. Therefore, in this small space of three to five square meters, details often become an important factor in determining its refinement.

Washbasin faucet, because people living in buildings need to wash in the bathroom, it is necessary to install washbasin faucets, so that people can be convenient when washing their faces.

All-copper faucets are better, and ** is not very expensive, so ordinary families will choose this faucet.

1. For the installation and application problems, you should choose bathroom products according to the layout of the waterway pipes in your bathroom.

2. Consider the function and choose the right faucet according to the needs of your family.

3. Choose the brand, quality, health problems, if the quality of life is relatively high, you can afford to buy brand faucets such as Kohler, TOTO, Wrigley, Jiumu, etc., if it is an economical faucet can choose according to the reputation of others, good service, cost-effective, healthy bathroom water dragon brand, such as Guangbiao sanitary ware, water dragon and so on.

The faucet is very familiar to everyone, it is one of the essential hardware materials for the home, especially in the bathroom area, we need to install faucets for different purposes, so that everyone's daily use. So, how many faucets should be installed in the bathroom? How do I install a bathroom faucet?

Bathrooms should be fitted with several faucets.

Generally speaking, the bathroom needs to install 3 faucets, a basin faucet, a shower faucet, and a bathtub faucet, which is an indispensable accessory for the bathroom. In addition, also get a water faucet, otherwise sometimes the bathroom needs to be connected to water, it will be more troublesome, if the bathroom has a mop pool, washing machine, but also install one, for everyone's normal use.

How do I install a bathroom faucet?

Step 1: First of all, we must prepare the tools for installing the faucet in Yamaga Bend, and check whether the faucet is complete with supporting parts before installation, common faucet spare parts are: hoses, rubber gaskets, showers, water removal, abductors, decorative caps, etc., and waterproof tape must be prepared.

Step 2: Check whether the main water valve is closed, if not, close it.

Step 3: Next, use waterproof tape to wrap several times in the clockwise direction on the thread of the faucet, it should be noted that the direction of the waterproof tape must be wound clockwise, and the water will leak if it is wound in reverse, that is to say, the direction of the waterproof tape should be opposite to the direction of the faucet thread.

Step 4: Screw the faucet clockwise onto the connector of the water pipe, then tighten it with a wrench.

Step 5: It is to open the main valve of tap water, and the water can be opened normally.

Bathroom faucet installation height.

1. Basin faucet.

The basin faucet should not splash when in use, so the height of the faucet should be proportional to the depth of the basin. In the standard case, the height of the basin faucet is generally around 80-85.

2. Shower faucet.

Shower faucets have open and concealed installations, and the location of the wall outlet of the concealed shower faucet is generally meters from the ground, while the shower switch is meters from the ground. Surface-mounted shower faucets are generally equipped with lifting rods, and the switch position of the shower faucet is also meters from the ground.

3. The height of the wall faucet.

The height of the faucet of the mop pool is between 50-70cm above the ground in the middle of the mop pool; The height of the wall faucet installed when the freestanding bathtub is placed against the wall is 75-85cm.

4. Washing machine faucet.

The height of the washing machine faucet is not lower than the height of the washing machine, mainly depending on the height of the washing machine, so there is no special standard.

The faucet's position in home life should not be underestimated, and it has become a necessity in our lives. However, in the process of installing faucets, many people will face a variety of problems, so how to install the faucet and what to pay attention to when installing? Let me share with you how to install the faucet.

Faucet installation is a very simple thing, everyone is at home to solve it will not trouble the decorator. Here's what I'm sharing with you.

Before installing the faucet, check whether the supporting parts are complete and whether the installation tools are complete. Common faucet accessories include hoses, rubber gaskets, showers, decorative caps, crutches, etc. Then clean the water pipe first, drain the water to clean the sediment impurities in the pipeline, the impurities in the installation hole, etc., and insist that the excitation accessories in the packaging box are not mixed with impurities, so as not to block the valve core during installation.

When taking over, remember that the left is the hot water pipe, the right is the cold water pipe, the distance between the two is 100-200mm, and then remove the faucet after the water inlet pipe joint is fixed, and wait until the wall plastering is completed before installing the faucet, so as not to wear the surface plating. Next, I will introduce the two types of faucet installation and precautions. First of all, for the faucet of single-hole basins, a special angle valve must be selected during installation, and the angle valve must be fixed with the cold and hot water pipes of the wall water.

If there is a distance between the angle valve and the faucet water pipe, you need to purchase a special pipe to lengthen it. If the inlet pipe is too long and exceeds the outlet pipe, the part can be cut off as needed, and if the angle is not suitable, it can be bent to the desired position as needed.

If it is a wall-mounted faucet, it is necessary to choose the appropriate height to bury the water pipe, and the distance between the hot and cold water pipes is about 20 cm or more. If it is a concealed faucet, the valve core of the faucet should be embedded in the wall. Pay attention to the thickness of the wall when pre-embedded, and do not remove the plastic protective film of the valve core when pre-embedded, so as not to damage the valve core with cement during the pre-embedding.

In addition, when embedding, it is necessary to pay attention to adjusting the direction of the valve core up and down, left and right, so as to avoid burying mistakes. The above is what I share with you, I hope it can be explained to you for reference, the installation of faucets is not a problem, as long as you figure out the steps to clear the fog.