-
1. Soil: The soil that the white palm likes is rich in organic matter, and the soil should be loose, have good drainage, and ensure that the soil is slightly acidic, which is the soil that the white palm likes. Therefore, when we mix soil, we can directly use peat soil with fine coconut peat to 1:
The ratio of 1 can also be mixed with peat, humus and perlite, in a ratio of 1:1:1, you can properly mix some well-decomposed sheep manure, or mix with appropriate slow-release fertilizer in the soil, you can ensure that the white palm has enough nutrients, and the soil is rich in humus, which is very beneficial to its growth and flowering.
2. Water and humidity: The demand for water is relatively large, and it is basically necessary to water it every day in a hot environment. Usually kept in a well-ventilated location, the potting soil is slightly dry, you can replenish water in time, but there must be no stagnant water at the bottom of the pot.
Even during the flowering period, make sure that there is enough water, do not let the soil dry completely, and spray water around it frequently to increase the humidity of the environment, if the air is dry, it will not be able to bloom.
3. Light: The white palm does not have a strong demand for light, so it is more suitable to be placed on the east-facing window sill, and it can also be placed in a place with lights indoors. Excessive sunlight can cause the leaves of the white palm to be burned, and the white palm that we usually see in parks or botanical gardens is also planted in the shade of a tree, or in the shade.
If you want the white palm to bloom normally, you must ensure that there is a high temperature and humidity environment, and the air must be circulated.
4. Fertilizer: If you want to fertilize the white palm, you must choose the right time, in the spring and summer growing season, you can give 1 or 2 times a month thin organic liquid fertilizer, the concentration can not be too large, do not leave fertilizer water on the leaves, otherwise it is easy to cause fertilizer injury. Usually you can use the common average fertilizer, and occasionally you can supplement the potassium phosphate dihydrogen solution once a month or two, which is conducive to promoting flowering.
The demand for fertilizer is very small, and the concentration of fertilizer can be less than half of that on the manual, which will achieve better results and promote the vigorous growth of branches and leaves.
-
1. Potted white palm requires loose soil, good drainage and aeration, and heavy clay soil cannot be used. When changing pots, it is generally mixed with humus soil + peat soil + a small amount of perlite. In addition, a small amount of organic fertilizer is added to the soil as base fertilizer, and the white palm grows better.
2. Humidity includes environmental humidity and soil moisture, during the growth period, keep the potting soil dry, but do not water too much, keep the potting soil dry but not dry, damp but not wet, otherwise it is easy to rot the roots.
3. White palm is a high-temperature tolerant plant, and the temperature will grow very well. It can grow normally and bloom during the summer high temperature period, and the flowering period is in May to August. The minimum temperature of the leaf tip in winter should be controlled at 14 16 and above 25 during the day.
4. Light is very important for the growth of white palms, especially in winter and early spring, full light maintenance can promote the growth of white palms, but as the temperature rises, the light gradually intensifies, so it is necessary to shade the sun in time.
-
1.Hydroponic breeding: Palm can be hydroponic, hydroponics to subtract the old roots, directly put into clean water, add some rooting powder, a week or so can take root, regular water can be changed.
2.Light: White palm needs better light in winter and early spring, but pay attention to shade in summer, do not expose to the sun, and spray the leaves with a sprayer to keep them moist in high temperature weather.
3. Fertilizer: It is best to use organic fertilizer for white palm, or you can make fertilizer yourself. You can choose watermelon rind and dilute the roots when watering.
4.Temperature: The most suitable temperature for the growth of white palm is 22-28 degrees, the lowest temperature at night in winter should be 14-16, and the daytime temperature should be around 25.
5.Maintenance after flowering: Prune in time after the flowering, then apply nitrogen fertilizer and then phosphorus and potassium fertilizer to promote the growth of its rhizomes, and put it in a ventilated place with scattered light for maintenance.
6.Management: Palm does not like water, do not water too much to cause rotten roots. In addition, pay attention to shade in summer to avoid burning the leaves.
-
It prefers a warm, moist, semi-shady environment and avoids strong direct sunlight. It is not cold-tolerant, the suitable temperature for growth is 20 28, and the overwintering temperature is more than 10.
Native to Colombia, it grows in the tropical rainforest, and its flowers are Buddha buds, which are leaf-shaped, that is, its flowers have no petals, but are composed of a white bract and a yellowish-white spike of flesh, which is very similar to the palm of the hand, and is called white palm; Its flowers are large and prominent, long and high above the foliage, white or green. It is one of the most popular indoor foliage plants in Europe.
-
The suitable daily temperature for the growth of potted flowers is 25-28, the night temperature is 18-21, the overwintering temperature is 10, the tolerable short-term extreme low temperature is 3-5, and the growth is slow or stops when the temperature is lower than 15 or higher than 33. The suitable air relative humidity is 60%-80%, and the suitable light intensity is 10000-15000lx. Generally, planting greenhouses require the installation of two layers of shading nets with a shading rate of 80%.
After the seedlings are transported to the planting site, they should be taken out of the packing box as soon as possible, packed in a seedling basket and placed on the cultivation bed frame, not upside down or directly on the ground to avoid bacterial infection. In the process of picking seedlings, it should be handled gently, and try to keep the original root group intact and not loose. If the substrate is too dry, it should be watered in time, the indoor temperature should be controlled at 20-28, and the light intensity should be 4000-5000lx.
Seedlings should be potted and planted as soon as possible after processing.
Generally, 4 seedlings are planted in each pot, first place a 2-3 cm thick cultivation substrate at the bottom of the pot, select 4 seedlings with neat height, place the seedlings on the four sides of the pot in a square shape, fill the substrate to the bud point at the base of the plant, and gently press the potting soil. Potted pots with a diameter of 90-110 mm should be planted first, which can be directly maintained as small potted plants and sold directly. If you need to plant medium to large potted plants, you can transplant and repot pots with a diameter of more than 120 mm after they grow to a certain plant shape.
The light intensity in the greenhouse is mainly controlled by opening and closing the movable shading net. The suitable light intensity is 10000-15000lx, and the light can be slightly stronger during the vegetative growth period to promote plant robustness and lateral bud tillering. After flowering, the light should be gradually reduced to increase the intense green color of the leaves.
When the indoor light intensity is lower than the light requirement, open the movable shading net to increase the indoor light intensity; When the indoor light intensity is higher than the light requirement, turn off the movable shading net for shade. Prolonged exposure to bright sunlight in summer can cause yellowing of leaves and may burn them.
-
Extremely fond of water, avoid direct sunlight. However, the light should not be too dark, and scattered light is most suitable. The room temperature is about 20 degrees and watered two to three times a week.
See if you need sunlight, put it in a place where you can get sunlight if you need it, you don't need to be casual! Then it's whether you like moisture or not, and if you like it, you can water it often! Finally, it's common sense, pay attention to loosening the soil, cutting off dead branches, and the characteristics of various plants!
The treatment of the root cause of white palm rot is as follows:1. If it is caused by improper watering, it is necessary to improve the watering method; >>>More
Indoor potted fruit trees are: kumquat, blueberry, hawthorn, grape, peach.
White palm is also known as smooth sailing. The leaf shape of the white palm is relatively slender, its flowers are slim and elegant, particularly elegant, and the white flowers are matched with the green leaves, giving people a sense of "pure and calm, peaceful and peaceful", so the white palm is also called "the flower of innocence". We usually call the white palm "smooth sailing", which caters to its flower language meaning, and also makes people feel that this flower is more auspicious, you can raise it at home, or you can give it away, representing a blessing. >>>More
I have a pot of white palms, a pot of green white palms.
It sits on my desk, and a district has been zoned for it as territory. I love this pot of white palms and I always water it every now and then. Watch it emerge with white leaf-like flowers, and watch it grow green leaves. >>>More