The correct way to raise water in a fish tank, the way to raise water in a fish tank

Disinfection or cleaning of fish tanks: If it is a new fish tank that has just been bought, it needs to be disinfected with potassium permanganate solution. If it's an old fish tank, it needs to be cleaned.

Adjust dissolved oxygen and water temperature: Fill the fish tank with water, then pump oxygen into the water, adjust the water temperature with a heating rod. Nitrification system:

Nitrifying bacteria are placed in the water to establish a nitrification system. Put the fish in the jar: Put the fish in the jar to test the water.

After a week, if there are no abnormalities, the fish can be released.

What is the correct way to keep water in a fish tank?

1.What is Hydroponics?

When we raise fish, we often hear people say "water first, then fish". Among them, hydroponics refers to the need to cultivate the water quality to be suitable for fish growth before putting the fish to be farmed into the water. There are many aspects, such as water temperature, oxygen content in water, nitrification system, etc.

All need to be careful. This step is very important. You can't just raise fish with water.

Otherwise, the fish may not adapt to the situation after being placed in the water, which will also have a very negative effect on the growth of the fish.

Second, the correct way to raise water in fish tanks.

The necessity of lifting water has been described above. Keeping water can be troublesome at times, especially when you buy a new fish tank. Specifically, the following methods can be followed to raise the water:

1.Disinfection or cleaning of fish tank: If you have just bought a new fish tank, you can disinfect it with potassium permanganate solution first to avoid containing some harmful substances to the fish. If it is an old fish tank, it is generally enough to clean it a little.

2.Adjust dissolved oxygen and temperature: After disinfection and cleaning, fill the fish tank with water, and then adjust its oxygen content and water temperature. In order to increase the oxygen content in the water, an oxygen pump can be prepared in advance. After that, you can adjust the temperature of the water with a tool such as a heating rod.

3.Cultivating a nitrification system: It is best to cultivate a well-functioning nitrification system in the water, which can be of great help in improving water quality.

4.Formal release of fish: After the above water raising steps are basically completed, you can raise fish. Before that, try some small fish to see if the environment is in the best condition.

The fish tank should be trapped in water for three to five days, and then the fish tank should be turned on for about three days of filtration and oxygen, and finally the main fish should be directly put into the tank.

First, three days of trapped water is the foundation, and five days is the guarantee.

If we are a new tank, new fish, please remember, at least we have to be trapped in the water for three days, which will help us quickly adjust the water quality of the fish tank, if a month later, our ornamental fish are in good condition, a small amount of water change can not be trapped in the water, this also depends on the species of ornamental fish raised.

2. Turn on the fish tank for about three days to filter and oxygen.

After the trapped water is trapped, the trapped water is added to the fish tank to remove the bottom impurities, and the fish tank filtration system and oxygen supply system are turned on, and the normal operation is about three days. The choice of filter varies depending on the species of ornamental fish reared, and the water flow is between five and ten times per hour.

The selection of filter material is mainly based on filter cotton, biochemical cotton, ceramic ring and bacterial house, as for the number of biochemical filter material, it accounts for up to five percent of the total water body of the fish tank, at least the fish farming veteran believes that the number of biochemical filter materials is more appropriate.

3. Put the main fish directly into the tank.

It is to be trapped in water for three to five days, and then add appropriate filter cotton, biochemical cotton, ceramic ring and bacterial house, ceramic ring and bacterial house account for up to five percent of the water body of the fish tank, turn on the filtration, oxygen, or heating device, and then check whether there are impurities at the bottom of the tank, and if there is one, the bottom will be sucked out, and if not, continue to run for three to five days and release the fish directly.

After releasing the fish to stop eating for three days, within three days is also our water quality maintenance period, there is too much feces in the fish tank to be pumped out in time, a little bit does not matter, the physical filter cotton should all wrap the water flow of the fish tank, to undertake all the impurities of the fish tank, properly adjust the filter position or water and water, the most important thing is to maximize the use of physical filtration.

Half a month later, we have to rely on our own diligence and perseverance to finally find the law of water quality conditioning in this fish tank through appropriate water change and feeding, because the feeding density and variety of ornamental fish are different, this law must be found by ourselves.

Wait until half a month later, what is the feeding amount, what the state of the fish is, we will be clear, the nitrifying bacteria in the fish tank have also been formed, at this time if we want to be lazy, it is basically impossible, because our habits and basic skills have been practiced.

The correct way to raise water in a fish tank is to disinfect, soak the tank, and add nitrifying bacteria.

1. Eliminate the poison of the closed section

Generally, the commonly used disinfectant is potassium permanganate, first fill the tank with water, you can put the filter material into the water, and then put potassium permanganate, soak for 1 2 2 hours and then put the water clean, rinse with clean water, until potassium permanganate is completely washed off.

2. a bubble tank

After disinfection, start soaking the tank, you also need to fill the tank with water, if there is no leakage, soak for a day, so that the water takes away most of the taste of the glass glue and the smell of the new tank.

3. Add nitrifying bacteria

After the disinfection and soaking tank is completed, the water is raised, and the filter material is opened at the same time, the purpose is to remove impurities and harmful substances in the water, and add digestive bacteria for culture, so as to form a stable nitrification environment. Pay attention to avoid sun exposure and let it stand for about 48 hours.

Precautions for fish farming in fish tanks

The first thing to pay attention to is water quality, water quality is the core factor of raising fish, when changing the water regularly for the fish tank, we should pay attention to good methods, not only to keep the water clean and suitable water temperature, but also to keep the water quality too large.

When feeding the wheel, try to choose the method of eating less and more often, and do not feed too much at one time, otherwise it is easy to overload the filtration system and pollute the water quality, which may lead to the disease and even death of the fish.

It is also necessary to add light to the tank properly, because it is not only the plants that cannot grow without light, but also the fish. Proper light can kill bacteria in the water, enhance the physique of the fish, and make the body color of the fish more vivid and beautiful.

01 When we use fish tanks to raise water, we generally have to choose a larger fish tank, and you can choose this thickened and lengthened version of the fish tank as shown in the figure below.

02 When we choose to raise water in the fish tank, we generally put an oxygen pump in the bathtub and turn on the fluorescent lamp, so as to better play the effect of water cultivation.

03 When we use the fish tank to raise water, it is best to put pebbles and some aquatic plants that fish like to eat in the fish tank in advance, so that they can better adapt to the water quality.

04 When we use fish tanks to raise water, we must choose water that is connected from the tap water pipe, and then put it in the sun for three days.

The recommended approach is as follows:

New tank disinfection: clean the new tank, disinfect it with salt, and wash it 1-2 times. Fill the main cylinder with water, put the water quality in the main cylinder to stabilize it, and use an air pump to pump air in the main cylinder.

The filter material is placed properly in the bottom cylinder, but it is recommended that the filter material should not be overfilled in the early opening of the cylinder, and the normal filter material should be filled with one-half on the line, and the culture of nitrifying bacteria in the early stage is effective from white cotton, biochemical cotton, rattan cotton, and black cotton. Therefore, cotton can be put more, and the rest of the bacterial house, biological ring, ceramic ring, infrared, quartz ball, etc., can be put in a small amount, and can be gradually added in the later stage.

At this time, there is no need to turn on the main water tank to run your fish tank. A separate small water pump is used in the bottom cylinder, and the filter cylinder is 120cm-150cm, and a 1000L-2000L water pump can be selected. You can choose 3000L for more than 150cm, but it is recommended that the pump should not be too large.

A separate small water pump is placed into the last stage of the bottom tank, and the water pumped out is placed in the first stage physical area after being connected with a hose, so that the structure of the bottom tank independent culture and digestion system is formed. On the first day, only one-third of the water in the bottom tank is put into the water body to stabilize the water, and the water pump and heating rod are turned on.

After the filter cylinder runs for 3-5 days, the main cylinder water pump is turned on and the separate small water pump stops running. Put the fish into the tank, observe the water quality, and the body surface of the fish. If the fish in the tank is fine, it is no problem to put in the fish to be molded and raised in a group after 2-3 days.

1.First of all, choose a larger fish tank, add an oxygen pump to the fish tank and turn on the fluorescent lights. 2.

When using a fish tank to raise water, it is best to put pebbles and fish grass that fish like to eat in the fish tank in advance. 3.Then leave the tap water in the sun for three days.

4.It is best to inflate with an air pump and dissipate the chlorine gas before use.

Fish farming first raises water, first of all, do a good job of trapping water, you can put tap water in the sun. Secondly, it is necessary to establish a good nitrification system. Nitrifying bacteria can be cultured by pouring them into water.

Nitrifying bacteria are conducive to the formation of a good microecological balance. When raising water in the fish tank, first of all, we must do a good job of trapping the water, you can put the tap water in the sun for two or three days, and after the new aquarium is disinfected, it is generally directly added to the fish tank for use, because the tap water contains a lot of chlorine, and it should generally be soaked in water for 2-3 days.

After being trapped in the water, the nitrification system in the water can be cultivated, and the nitrifying bacteria can be poured into the water for cultivation, and various filter media can be placed for it to adhere to, and the amount of dissolved oxygen in the water can be kept sufficient. Usually a nitrifying environment can be cultivated in a month or two, and a small amount of water change can be carried out in this process, which can help to cultivate a nitrifying environment more quickly.

In addition to nitrifying bacteria, there are some other beneficial bacteria that are recommended for use. Beneficial bacteria can not only efficiently clean up organic matter in water, but also help to form a good microecological balance.

If you want to make the fish tank grow water quickly, you must first remove chlorine and harmful bacteria from the tap water; Secondly, nitrifying bacteria are added after three days of fish release, and when they are attached to the fish tank wall or aluminum surface, nitrifying bacteria populations will be quickly generated, so that the water in the fish tank is more suitable for fish farming.

Opening the tank is the first step in raising water, so it is necessary to open the tank to complete the rapid water raising. Opening the tank is to make the water in the fish tank form a good ecological chain and meet the standard of fish farming. Tap water cannot be directly used to raise fish, because it contains a large amount of chlorine and harmful bacteria, and lacks the nitrifying bacteria required for fish farming, so opening a good tank to raise water is the first step in fish farming.

The method of rapid water cultivation in fish tanks is to quickly generate nitrifying bacteria populations in the water. When the tap water is put into the fish tank, the oxygen pump is turned on to supply oxygen for two days, and then the fish is put into the water, and nitrifying bacteria are added after three days, and after the nitrifying bacteria are implanted, the ammonia in the water will be eliminated to form nitrite.

At this time, nitrifying bacteria begin to grow and multiply in large quantities, thus forming a population of nitrifying bacteria, they will adhere to the water tank wall or aluminum surface, even if the fish tank is changed in the future, there is no need to worry about disappearing, nitrifying bacteria are indispensable substances for rapid water cultivation in fish tanks.