What to do if the floor tiles of the house are sticky and empty, and how to remedy the empty floor t

You can choose to pour mud around the empty floor tiles, and then you can also switch to a special cutter to leave a one-centimetre shockproof joint. After cutting, you can use a hammer to gently tap to clean up the garbage, and then use the same size and amount of cement mortar mix of floor tiles. In general, it is possible to lay the corners of the wall with glass suction without affecting the adjacent tiles.

You can choose to fill the floor tiles in the air, fill the cement slurry around, and then you can also change the special cutting machine, leave a centimeter of shockproof joints, and gently beat with a hammer after cutting, clean up the garbage, and then use cement mortar to match the floor tiles of the same specification and number, generally use glass to suction the good corners of the paving can not affect the bricks next to it.

There are two ways to deal with it:

1.Fill the empty floor tiles with cement grout.

2.It is to change the bricks, and after cutting the 1 cm shockproof joint with a cutting machine around the empty floor tiles, clean up the garbage with a hammer, and then use cement mortar to match the ratio, buy the floor tiles of the same specification and color with glass to suck on the good corner, and it will not affect the similar bricks.

If it is not very empty, you can grout the inside, use plain cement, if it is very serious, replace it and re-pave it.

If you don't rush the deadline, dig it up and re-pave, and if you rush the deadline, you can only make do. Don't hit this brick hard later.

If it's a small amount, replace it, and if the area is large, you can only do it from it.

Now many people will buy their own houses, but after everyone buys a house, the thing to consider may be decoration, so everyone must pay attention to this matter, if your house is not well decorated, then you will feel particularly unhappy when you live in the future. Some of the floor tiles pasted at home have formed hollow drums, and now they have fallen, can they be glued on?

Although theoretically you can glue the floor tiles on, it is not recommended to use this method. Because you use this method will not keep the floor tile for a long time, you may find that the floor tile has fallen off again after a while, so it is best to recommend that you re-lay, you can prepare some cement yourself, and then fill the cement under the floor tile, so that the floor tile will become very stable.

In fact, some people will really find that the floor tiles of their home have fallen off, or they will find that their floor tiles have this situation. It may be because these workers in the process of laying, there are some improper behaviors, in fact, we need to soak the floor tiles for a period of time before pasting the floor tiles, so that the tiles will become more cohesive, if the tile is not soaked in water, it may lead to the straight plate paste is not very firm, and must do a good job of plastering, if it is not cleaned, it may also cause the floor tiles to fall off.

Therefore, it is definitely recommended that everyone must look carefully when decorating, if you don't look then these workers may cut corners. So we should also deal with this problem, if it is a wall tile, it may be because there is no unevenness, because the floor tile is actually not absorbent, if you use glue to glue, then you will find that it is not sticky. If you don't know how to fix it, you can find a worker to do it for you.

1. Hollow corners of floor tiles, if you find that there is a hollow drum in the corners of a certain floor tile, we can gently shovel open the gaps around the floor tiles, use relatively thin cement to pour into it, pay attention to knock the floor tiles while pouring, so that the cement mortar can completely penetrate into it, and after re-pasting, wipe the cement mortar on the surface of the floor tiles, do not walk on it at this time, and then walk after the cement mortar is dry. This repair is more time-saving and labor-saving, not only can quickly repair the problem of hollow corners of the floor tiles, but also will not cause damage to the floor tiles. Second, the middle of the floor tile hollow, in the case of a hollow drum in the middle of the floor tile, the whole floor tile must be pried down and paved again.

When prying the floor tiles, do not smash them directly from the middle, so as not to damage the surrounding intact floor tiles due to excessive force. You can use a small rhinestone to make a hole in the middle of the floor tile first, and then use a professional tool to slowly pry open the floor tile around the floor tile, and then strictly follow the standard paving method of the floor tile after the floor tile is pry down, and then re-pave.

Try not to choose to glue it up, because it will still fall off if you stick it this way, and it is best to choose a professional to actively deal with it to avoid bringing more trouble in the future.

It is also possible to glue it on, but it will fall off, and the best way is to paste the floor tiles with cement.

Yes, you can also choose to re-paste and then ask a professional to get a good result.

If it is dropped, re-pavement.

If it is a local hollow drum, you can try the low-pressure grouting method.

Floor tile purchase skills: 1. Anti-slip test: Floor tiles generally include glazed tiles, full-body bricks and full-body polished tiles, which all have one thing in common, that is, they are not anti-slip.

Although beautiful, simple and generous, it is not particularly suitable for owners and friends who have elderly and children at home to decorate and buy, it is recommended to do an anti-slip test when purchasing, just in case. 2. Color identification: The color identification mentioned here does not refer to the surface of the floor tile, but to see whether the color behind it is uniform and consistent.

If the color is uniform and consistent, the floor tile is of better quality. 3. Surface inspection: check the color on the back, the surface must also check the brightness and gloss, the greater the brightness of the surface of the floor tile, the stronger the density of the floor tile, the stronger the pressure resistance, and the higher the polishing technology.

The relative wear resistance and stain resistance are better. 4. Measuring size: When purchasing floor tiles, we must check and measure the consistency of their size and specifications, and place them on a fixed plane, so that there will be no warping of edges and corners.

5. Specifications of floor tiles: The specifications of home decoration floor tiles are 300 300, 300 450, 300 600, 600 600, 800 800, etc., especially for living room tiles, as well as specifications of more than 1 meter. Among them, the most commonly used glazed bricks for home flooring are 300mm 300mm and 330mm 330mm.

If the bathroom is about 2 square meters to 4 square meters, it is recommended not to use large floor tiles. The bathroom space is small, there are many corners, too large tiles need to be cut frequently, which is very wasteful, and the ground leveling is also a little difficult, and the installation of floor drains is not very convenient.

You can choose to fill the floor tiles in the air, fill the cement slurry around, and then you can also change the special cutting machine, leave a centimeter of shockproof joints, and gently beat with a hammer after cutting, clean up the garbage, and then use cement mortar to match the floor tiles of the same specification and number, generally use glass to suction the good corners of the paving can not affect the bricks next to it.

There is a technique called"Grouting", that is, the cement and water are mixed into a relatively thin cement slurry and filled into empty mineral water bottles. It's not easy to do, dig it, be careful to get it out and then make up the bricks.

How to repair the floor tiles when they are empty:

1. Sift a little yellow sand with a noodle sieve first.

2. Cut a slit around the empty floor tiles with a cutter.

3. Mix the yellow sand screened by the noodle sieve with the cement into a thin paste.

4. Pour the thin mortar from the crack and quietly knock on the floor tiles to fill the open space under the floor tiles.

5. Finally, it is good to deal with the gap in the second day. It is recommended that you do not need to repair it, if it affects the beauty or unevenness, then ask the master to chisel the brick and re-find and lay a piece of it.

In the case of a large area of tile warping or hollowing, it is necessary to remove the tiles in the original warping or hollowing area, remove the original cement mortar layer, clean the base layer, and reapply the cement mortar. Be careful when cleaning the tiles, do not break them, if you really can not use them again, you should buy new tiles, it is recommended that the owner buy more tiles when buying tiles for the first time, in case of emergency.

The floor tiles are empty, and the floor tiles should be repaired.

It has not been more than a year since the renovation was completed, and it is recommended to find someone who specializes in decoration to repair it. Because the floor tiles are hollow, if they are not repaired for a long time, they will crack and collapse.

And repair it yourself, not to mention whether it will be, but also time-consuming, laborious and material-consuming, and finally repair it badly, and finally you have to find a special decoration person to help repair the floor tiles; It's better not to do it all at once.

And the reasons for the hollowness of floor tiles are:

First, the mortar is not full and unevenly applied, and second, the wet ground is not wet, and the dry ground draws away the water in the mortar.

Third, after sticking the bricks, there is no health preservation, and the tiles that have just been paved are stepped on, resulting in loosening, and there is no water splashing after the bricks are paved.

The floor tiles are paved with empty remedies.

1. Determine the scope and area of the cement hollow, which can lay a good foundation for the next step of rectification work.

2. Pour mortar around the edges of the floor tiles to fill in the empty areas of cement.

3. In the central area, it is necessary to change the bricks and pave, after reserving the shockproof joints with the cutting machine, then use a hammer to gently beat and clean up the broken bricks and garbage, and then pave the floor tiles of the same specification and color.

4. After the completion of the rectification work, it is necessary to leave time for restoration and reinforcement, so that the cement mortar has a process of tightening and reinforcing.

Empty floor tiles are a common problem that can seriously affect the home environment and daily life if not dealt with in time. Below I will propose a few ways to solve it:

1.Use a patching agent: If the floor tiles are hollowed out because the ash joints at the brick joints are cracked or peeling, special patches can be used to repair them.

The patching agent can block the brick joints, make the ground smooth and smooth, and can prevent dust and moisture from entering the brick joints and prolong the service life of the floor tiles.

2.Replacement of bricks: If the paving is due to damage to the floor tiles themselves, the bricks must be replaced.

First of all, you need to find the floor tiles of the same size and color, then remove the old bricks, lay the new bricks and fix them with adhesive. This method requires a certain amount of tools and experience, otherwise it is easy to cause problems.

3.Resurfacing the floor: If the paving area is large and exceeds the size of one brick, then the best way to do this is to resurface the floor.

This method is time-consuming and laborious, requiring all the old tiles to be removed and re-surfaced, and then new ones to be installed. This is also the most radical solution.

Regardless of which method you take, there are a few things to keep in mind:

1.Pay attention to safety: When dealing with the problem of hollowing out the mold tiles, we should pay attention to safety and avoid accidental injuries.

2.Materials: If you need to use a patch or replace the floor tiles, be sure to use *** materials to ensure that the ground is strong and durable.

3.Select the appropriate scenario: Different solutions are suitable for different scenarios.

In short, floor tile emptying is a relatively common problem that needs to be solved in time. The above methods are all feasible solutions, and the appropriate methods are selected according to the actual situation to maintain the cleanliness and comfort of the family living environment.