What should I do if my Rolex watch is scratched?

How to deal with the wear of the watch glass:

If the watch is accidentally scratched or cracked by a key, it can be used temporarily. However, for watches with precision operation, the waterproof and dustproof performance of the watch will decrease at this time, and it should be replaced by a professional watch store as soon as possible. When there are scratches or slight scratches on the watch mirror, you can first drop one or two drops of water on the watch mirror, then squeeze a little toothpaste, and then wipe it back and forth with a cotton ball to remove the scratches and make the watch glass as new.

In the case of severe damage such as explosions, broken corners and severe breakage, and debris all over the dial, the following measures need to be taken immediately: the first thing to do is to stop the watch. Pull out the watch handle and stop the watch from running.

Pulling out the handle allows the watch to stop, preventing the hands from scratching the dial and date by driving glass shards. Never dial hands and fast-setting calendars, and never try to remove broken glass from the dial yourself. When sending the watch to the watch shop for repair, the watch needs to be placed flat (preferably with the glass side down) in the box, and there should be no violent vibration and shaking during the repair.

During the repair process, the maintenance personnel need to be told not to let the glass shards damage the dial and watch hands.

There are generally two types of broken crystals, one is broken corners and the other is completely broken, and in both cases, the crystal must be replaced. The breakage of the watch glass will not only cause the watch to lose its sealing, which will further affect the water resistance.

First of all, pull out the watch handle and stop walking. The reason why the watch is pulled out to stop the watch is to prevent the hands from scratching the dial and date disc by driving the glass shards, causing a second injury. And the ** of the dial is more expensive than the glass, whether it is repaired or replaced, it is a lot of pens.

Don't pull out the hands and jump calendars, and don't try to clean the dial of glass debris yourself.

The watch must be squared, that is, the glass side down, placed in the box, and try to avoid violent vibration and shaking during the repair.

Hello, glad to answer for you.

When there is a crack in the watch cover, it will cause the watch to lose its water resistance, and it will also affect the appearance.

Therefore, it is recommended to replace the surface mask in time to avoid accidental water ingress and unnecessary losses.

When the watch completely bursts and the glass chips are all over the dial, it is necessary to immediately pull out the watch handle and let the watch stop to prevent the glass from scratching the dial.

In the process of sending for repair, it is best to lay the watch mask down flat and try not to shake the watch.

It's okay if the Rolex watch is scratched, it's not very serious, because the price of Rolex watches is very high, and the quality is good, and the general bumps and scratches will not affect the watch.

The after-sales center of Rolex watches is in: Room 1003, 10th Floor, Hongyi International Plaza, No. 299 Nanjing East Road, Huangpu District, Shanghai, when your watch fails, you should go to the regular after-sales center, and the watch will be fully repaired and inspected by a professional technician.

In order to drive the hands, the watch uses a beating method to make it turn by using the characteristics of a magnet. Therefore, if it is affected by strong external magnetic waves, it will not function normally, and it is also the cause of the watch to become faster, slower or stopped.

The only way to break the glass is to replace the glass, and there is no way to repair the glass. If the glass is broken, there will be glass slag, and if the watch with day and date functions, the glass slag will fall into the movement, the first thing to do is to pull the watch handle out of the second gear to stop the watch from moving, so as not to get stuck in the gear and cause secondary injury. During the warranty period, contact the after-sales service to deal with it, and the over-warranty can also find the source after-sales service or find a professional maintenance shop to deal with the watch glass is an appearance accessory, and it is also a man-made rupture, which needs to be replaced by personal payment.

The official after-sales warranty needs to be handled by yourself.

If you can afford a Rolex, do you care about scratches, buy another piece?

If the watch is dropped to the ground, or if it is bumped, it causes scratches, cracks, broken corners or even complete shattering of the watch. Generally, the first two can also be used exquisitely, but it only affects the aesthetics of the watch, but if it is the latter two, it is necessary to replace the watch mask, that is, the glass on the dial. **You need to take it to the master to check it first, the glass to see the specifications, size, material, the pointer to see the style and movement, the replacement is the original accessories, otherwise the installation can not be.

It doesn't matter if the watch is scratched or worn, but if the watch is completely broken, you should immediately pull out the head and stop the watch, then put the watch flat in reverse, and immediately send it to a regular watch repair center for repair and replacement. Be sure to avoid drastic ** on the way to the destination.

Summary. Rolex watches can be barely used when there are small cracks, but it will not only affect the aesthetics of the watch, but also make the watch not airtight, resulting in the watch losing its waterproof performance, which can easily cause the watch to enter the water. When the corners of a Rolex watch are broken, or completely broken, the only way to do so is to replace it.

Rolex watches can be barely used when there are small cracks, but it will not only affect the aesthetics of the watch, but also make the watch not airtight, resulting in the watch losing its waterproof performance, which can easily cause the watch to enter the water. When the corners of a Rolex watch are broken, or completely broken, the only way to do so is to replace it.

Rolex watches are basically mineral quartz glass, this kind of watches are relatively cheap, and the replacement will not be very expensive, so it is best to replace the watch or go to the after-sales or more professional repair watch shop for replacement, so as to effectively ensure the quality of the product.

The table Mengzi buckles up and always drops.

Take a light bite with your hand and it will fall.

You don't mean what I mean.

You can take it to the after-sales repair center and let a professional technician test and repair it for you.

What do you do with this?

I'll teach you this, you get the early old-fashioned watches at that time, because they are pulled screws to fix the watch handle, so basically most of the failures are caused by loose stop screws. However, today's watches are basically fixed by pulling the gear shaft.

Is this the problem that comes to you to solve?

The handle of the watch is very rusty.

I'm talking about what the table Mengzi always calls to stick it.

It's hard to restore yourself. The table is not stained.

Hello, the watch of your Rolex watch is always lost, you need to find a professional watchmaker to repair it for you, and you need to disassemble the case movement to replace it. The table is buckled from the inside out, let the professional master help you deal with it. Sometimes you can't install it well, and you have to check whether there is a problem with the watch, and see if the card ring around the watch mask needs to be repaired or replaced.

If your watch accidentally falls, pick it up, see if it can continue to run when walking, if you can, we first listen to whether the watch has abnormal noise, whether the surface is scratched, whether the lens is broken, abnormal noise and broken watch glass need to find a watch shop for repair, if the problem is not big, you can not rush to the master to check, because there is no big problem, it is not recommended to disassemble the back cover, you can let the master check it by the way when the watch is maintained. If I can satisfy you, please give a thumbs up, thank you for your support, and wish you all the best and good health.

Hello, you can find a professional repair master to polish the watch.

If there are deep scratches, it is necessary to focus on polishing with oil stones in the local area. This needs to be carried out under a magnifying glass, the purpose is to evenly smooth the scratches, when the scratches are basically ground to be smoothed, choose sandpaper with the right particle size, and grind along the original sanding pattern, usually this line is radial with the dial as the center, so this is a careful work, to a little bit, the grinding effect will be good and realistic.

Local deep scratches on the case or strap need to be done locally before repairing, depending on the location, such as the case side, it is even possible to use a fine small file, more often with a stone stone, and then under the magnifying glass, carefully boring the deeper scratches.

If the watch is scratched, it can be done by grinding, wearing, and polishing the worn watch to look brand new. If there is a serious bump that causes hard injuries, smashes and dents, the repair process is relatively complicated, and you need to bring the watch to a professional watch repair center for repair.

Daily maintenance method of the watch:

1. Do not open the back of the watch at will, so as not to affect the normal operation of the watch.

2. Don't put your watch in the closet, mothballs will make the watch oil deteriorate.

3. Do not put the watch on the amplifier, stereo, TV, so as not to magnetize.

The Rolex MRO Center is located in Room 2606, Block B, China Resources Building, The Mixc, No. 1366 Qianjiang Road, Jianggan District, Hangzhou.

1. When wearing and using Rolex watches in daily life, if the watchmakers do not have a sense of maintenance, then Rolex watches are easily scratched by bumps. If it is some small scratches, it can be dealt with by yourself, you can apply it with toothpaste, and then wipe it lightly to remove, but this method is only suitable for minor scratches.

2. For slight scratches on the case of a Rolex watch, you can also wipe it with a professional K gold cloth to wipe it. Since polishing the case of a Rolex watch requires the removal of an oxide layer, there is a limit to the number of times a Rolex watch can be polished. When using a Rolex watch, you need to take care to stay away from hard objects as much as possible and avoid wearing a Rolex watch during strenuous exercise; Sweat stains can corrode the case and strap of your Rolex watch in summer, so it's a good idea to have a paper towel or soft cloth to wipe off the dust and sweat on the case.

3. Partial deep scratches on the case or strap of a Rolex watch need to be treated before repair. For example, on the side of the case, use a fine file or stone to carefully boring the deep scratches under a magnifying glass; For Rolex watch cases and straps, the processing should be done first with sanding, and then polishing and polishing, covering the sanded parts that have been trimmed, simply with adhesive tape, and the more formal ones should be made with metal stencils, which are also used for covering when polishing until the scratches disappear.

All scratches on the watch case and strap can be removed in this way if you want to remove it or renovate the appearance of the watch. The straight-line shape of the pattern is easier to do, if the pattern is concentric, then it should still be done by using electric machinery. It is not difficult to fix the scratches on the case strap with sandpaper yourself, as long as you are careful and steady, you can do it; But for the surface is polishing process, then you must use a cloth wheel polishing machine, and ordinary people can't do it.

For cases and straps with sand-drawn and polishing processes, sand-brushing should be done first, and then polished and polished, but it is necessary to cover the sand-drawn parts that have been trimmed.

If there are scratches or slight scratches on the mirror surface of the watch, you can drop one or two drops of water on the mirror first, then squeeze a little toothpaste to wipe it, and then wipe it back and forth with a cotton ball, you can remove the scratches and make the mirror as new.

Another method is sandpaper wiping. You can choose a piece of sandpaper, try to use relatively clean pliers when taking the sandpaper, and then, use pliers or other tools to clamp the selected sandpaper, find the texture of the glass surface of the watch, and then wipe it gently.

If there is a problem with the watch, I recommend going directly to the watch after-sales center. After-sales is not only more professional technicians, but also the instruments are imported, more precise, and **also very transparent, will not be messy**. When not to go to a regular after-sales center.

Otherwise, if you are trapped, you can only blame yourself.

Hello, it is recommended to go to a professional after-sales maintenance service center to deal with, I know that there is one located in Beijing.

Room 1102, Block D, Central World Trade Center (Bloomage International Center), No. 6 Jianguomenwai Street, Chaoyang District, Beijing.

If the glass on the surface is completely shattered, and the broken surface is inward (towards the dial side), glass shards will be all over the dial. In this case, it is necessary to take immediate measures, such as pulling out the crown and stopping the watch.

You must not dial the hands or adjust the calendar quickly. Lay your watch flat (preferably with glass side down) until it is sent to a watch repair shop. Do not shake or shake violently.

Tell watch repair shops to be careful not to let glass chips damage the dial and hands during disassembly and repair.

Mild: When the watch is accidentally scratched or cracked, it needs to be replaced in a professional watch store as soon as possible, although it can be used temporarily, but it is not waterproof or dustproof, and it will affect the use of the watch with precision operation.

Severe: Bursts, crumbling corners and severe breakage, debris all over the dial, take immediate action as follows:

1. Stop the watch: pull out the watch handle to stop the watch, so that the pointer does not drive the glass chips and scratch the dial and the date disc.

2. You can't dial the hands, you can't adjust the calendar, and you can't try to remove the broken glass of the dial by yourself.

3. Place the watch flat (preferably with the glass side down) and put it in the box to ensure that the watch is not vibrate.

4. Send it to a professional watch shop for repair immediately.