The Rolex watch has been repaired twice, and the same problem occurs, what should I do?

Be sure to get a regular after-sales treatment.

Change ** can be sold, many things are like this.

It is recommended to choose a professional repair center to avoid losses to your watch, the specific situation needs to be tested and processed by a technician, it is recommended to call ** detailed consultation.

Repair watch water, watch go fast, watch wash oil. Watch movement maintenance, cleaning appearance, scratch treatment, custom straps, watch battery replacement, authenticity identification, watch diamond inscription, welcome to click on the avatar to call for consultation.

Poly time watches will have various problems if they are used too frequently, such as inaccurate time.

Maintenance methods for Rolex watches: 1. When wearing a Rolex watch, pay attention not to exercise vigorously. Although the quality of Rolex watches is really good, and at the same time, they are shock-resistant.

However, any shock-resistant and sophisticated watch will not work properly in a violently vibrating environment. Second, if there is an abnormal sound in the Rolex watch, or if the time is abnormal, immediately send it to a professional maintenance organization for inspection. Third, if the watch gets into water, don't ignore any water vapor, which may cause rust on the watch parts.

Fourth, check and maintain frequently. Rolex watches should be checked and maintained frequently in order to maintain their value, it is recommended that you often check and maintain your Rolex watches, generally send your Rolex watches to professional maintenance institutions for inspection in two or three years, and carry out comprehensive maintenance of your Rolex watches in four to five years, such as cleaning the movement and oiling it! Fifth, dirt and sweat, as well as other chemicals, can cause corrosion to the watch case.

Sweat on your wrist in the summer, as well as substances such as cosmetics and hand sanitizer that you often come into contact with, can cause corrosion to the watch case. No matter how good the watch is, it is afraid of corrosion, six, anti-sun and anti-fading. When wearing a Rolex watch, try to avoid exposure to the sun, as prolonged exposure to the sun can cause the watch to fade.

Rolex is a classic brand in the Swiss watch industry. Originally marked by a five-fingered palm, Rolex was a sign that the brand's watches were carved entirely by hand, before evolving into a registered trademark of the Crown, a sign of its supremacy in the field of watches and the regal spirit of Rolex in watchmaking.

This needs to be communicated with 4S, and there is a basis to explain whether the fault is due to multiple [more than one time] during the warranty period, and the maintenance fails, and the same fault occurs again after the warranty period, whether it can be solved free of charge.

Ordinary people don't know how to repair, and there is no way to repair it themselves. For those who don't understand, the watch can't be disassembled and repaired by itself at will, and it needs to be repaired by a professional maintenance master, otherwise it will be damaged if it is messed around. If you're proficient in watch repair yourself, you should be able to take a look.

It is recommended not to repair it yourself, if you know how to repair the watch, you can simply repair a small problem, if it is more serious, it is better to send it to the repair shop, the store is well-equipped, more professional.

Chengdu Rolex Watch After-sales Service Center: Room 05, 24th Floor, SAC Dongyuan Center (formerly Aviation Plaza), Renmin East Road, Jinjiang District, Chengdu;

24 hours**: 02862225508;

If it is still within the warranty period, it is not recommended to repair it yourself, if it is not repaired, it will be troublesome to find a warranty.

If you can repair it, you can repair it, but if you can't fix it, then don't take a break.

Hello, it is recommended that you can open the warranty coupon attached to the purchase of the watch, under normal circumstances, there will be a service address on the warranty copy, or find a regular watch service center for testing and maintenance of the address of the store, etc., if there is a professional after-sales maintenance center nearby.

“1.Because of the environment The environment is one of the causes of damage to the watch. It contains various influences, such as moisture, heat, condensation, etc., which will indirectly cause the abnormal phenomenon of the watch.

2.Failure during normal use Under normal circumstances, no matter how good the watch is, it will have some depreciation after being worn by the watch for a long time. At this time, it is not surprising that there will be a failure.

Hello, it may be a lack of motivation. If you need to wind a mechanical watch by hand.

Generally, the normal winding takes 30 times, and it is basically full, (provided that you want to be full) The winding watch on your hand actually doesn't matter, as long as you keep it up until you can't turn it, the mainspring is full.

For automatic watches, because most automatic watches can be wound by hand, especially when worn for the first time or after stopping, you need to start the winding with your hand first. (It is recommended that you do not rely on the rotor to wind the full string at the beginning) everyone also knows that because the automatic watch is "not up to the string", it is recommended that the number of winding times of the automatic watch should be more than less, and you may wish to put a few more, such as up to 40 times, it is basically guaranteed to be full.

It is recommended to send it to the after-sales service center for testing and repair.

Hello,Ruizuan Watch Repair Service CenterFor you to answer,,I will give you the answer to your question,The repair location will be forcible **,Reason,The repair point does not know what you want to do with your parts,Second,This **parts are said by the watch factory,All the parts that are replaced must be unified**,Third,If you insist on taking away the parts that your watch replaces,Then your watch will not be warranted (within two years of warranty),You can contact me at any time if you have any questions,Hope to adopt (all watch replacement parts will be **)

Ruizuan Watch Repair Service Center.

All the parts of the watch will be replaced.

There are two types of watch winding: manual winding and automatic winding. The parts of the hand-wound watch mainly include: shank shaft, vertical wheel, lying wheel, small steel wheel, large steel wheel, jack and jack spring, screws of large and small steel wheels, and some components that play the role of clutch positioning; The self-winding watch is made up of self-winding parts on this basis.

Compared with other parts in the watch movement, the winding parts are considered "coarse" and relatively "large". Winding a watch can happen every day, and in the process of winding the mainspring, the parts are subjected to more force. In the long run, it is conceivable that the wear and tear of this part of the parts is also relatively large? Target.

The causes of problems and failures that are prone to occur in the upper winding are:

1. There is idling and there is no "card card" sound when winding, which may be due to the loosening of the screws of the large and small steel wheels.

2. After winding, the watch handle automatically retreats, and this problem is often the failure of the jack or jack spring.

3. When winding, I feel that the force is light, and the string is not satisfied, it is obvious that this is the mainspring is broken, and the situation of the tail hook on the mainspring is the most. The watch of the broken tail hook can still move, but when the mainspring is almost full, it will suddenly relax again.

4. When twisting the watch handle, the watch can only dial the needle and cannot be wound, because the clutch rod is not in place, and there is a problem with the handle shaft or pull gear.

5. When there is a strange sound of jamming during winding, it may be that one of the teeth grinding of the vertical wheel is damaged.

6. When winding, the abnormal sound of card card and cannot be wound is generally caused by the wear of the helical teeth of the lying vertical wheel, or the meshing gap between the vertical wheel and the small steel wheel is too large.

When winding an automatic watch, it will feel a little "strained" due to the heavy load. This is also related to the size of the handle and the friction between the handle and the shank tube, if you can regularly put some silicone oil between the handle and the shank tube, the winding will feel much easier.

If you find that when you wind your automatic watch, the rotor rotates rapidly, and the watch vibrates violently, it means that the automatic parts of your watch need to be cleaned again.

If the watch handle is seriously damaged, then you need to replace the watch with a new one, but if the watch handle is not seriously damaged, then it can be repaired, and there is no need to replace the watch with a new one.

Repair Didian 4006669505, hope it can help you.

Usually only the watch head is damaged, the watch stem is still in the watch movement, and the watch handle is still there, then it can be repaired, if the watch handle is not there or the watch stem is damaged, then it needs to be replaced with a new watch handle. The main purpose of repairing a Rolex watch is to see the extent of damage to the watch handle.