Should the living room at the door of the bathroom be waterproofed? What do you think?

Should the living room at the door of the bathroom be waterproofed? What do you think? To do, because the water in the bathroom is very easy to get out, do a good job of moisture-proof at the door of the bathroom, so that the interior decoration outside the toilet can be maintained more quickly from water vapor.

Corrode. Generally premised this place is not done due to the threshold stone.

To be higher than the pavement of the bathroom, there is a water retaining edge, which can be optionally made to the top in order to ensure that it is foolproof.

Because most of the bathroom floors are inclined, the anti-odor floor drain to the bathroom is skewed. Therefore, the water is not easy to run out of the bathroom, and to the large living room at the door of the bathroom. Therefore, there is no need to increase the cost and make the large living room at the door of the bathroom moisture-proof.

Should the bathroom door be moisture-proof? This must be made moisture-proof, and a water barrier must be placed under the door to prevent the water from flowing into the large living room.

Under normal circumstances, the living room and bedroom should not be waterproof, because most of them are particularly rarely touched with water resources, if the living room and bedroom have floor heating installed, it should be moisture-proof, if the large living room, room space and bathroom are only separated by a wall, it is also necessary to do a good job of moisture-proof methods, if it is the lowest floor housing such as the first floor, the ground is more damp, and the same should be waterproof.

Diatom mud. Diatom mud these materials are to wear a piece of clothing for the wall, these materials are relatively soft, generally knocked down will not have too painful feeling, especially suitable for home decoration of the elderly and children, and diatom mud has 2 shining points, an environmental performance, commonly used raw materials are all low-carbon environmental protection, without any addition, the second is moisture-proof, is a good choice of waterproof materials for the wall of the large living room.

silicon baths; Although the flexibility of the silicon bath is not as good as the diatom mud, the environmental performance is the same as the diatom mud, and the adhesion level is much better than the diatom mud, the advantage of the silicon bath depends on the speed, it can absorb harmful substances in the air, moisture, these have the effect of waterproof. waterproof wall paint; Waterproof wall paint is different from general wall paint, depending on the wall paint contains a unique waterproof paint.

This kind of wall paint is very suitable for wall decoration and engineering construction in large living rooms.

This then creates a layer of moisture-resistant paint that prevents moisture from penetrating into the wall.

The bathroom must be waterproof, if it is not waterproof, then water leakage and water seepage is a very annoying phenomenon. In the small space where the frequency of use in the bathroom is so high, if the decoration is not done well, it is really bad, and more importantly, the maintenance and transformation * is expensive and troublesome. A reasonable bathroom will directly improve the happiness index of residents.

Before the waterproofing treatment, the ground must be leveled first, so that when the cement mortar is applied later, it will not cause the problem of uneven application. In this way, when the cement mortar is applied in the later stage, it will not cause the problem of uneven application, and the uneven thickness of the cement mortar will also cause the problem of leakage.

To be done, because the water in the bathroom is very easy to get out, do a good job of moisture-proof at the door of the bathroom, so that the interior decoration outside the toilet can be maintained faster from being corroded by water vapor. There is a water retaining edge, which can be optionally made for the top in order to ensure that it is foolproof.

It is very important to do waterproofing in the living room at the door of the bathroom, because there will often be water overflowing in the bathroom, and if you don't do a good job of waterproofing, it will damage the overall decoration.

The waterproofing of the bathroom needs to make the door, which can be about 10 cm beyond the threshold position.

1. The waterproof height of the wall is generally 30cm; For non-load-bearing walls, the basic waterproof height should be at least 180cm; The waterproof height of the wall of the bathroom with a shower room should generally be 180cm;

2. If there is a bathtub, the waterproof height of the wall adjacent to the bathtub should be 30cm higher than that of the bathtub. The wall in the bathroom in contact with the washbasin is 300mm from the ground to the washbasin; Pipes through the floor slab. The waterproof height is about 100mm above the root of the tube.

3. The waterproof height of the bathroom floor is usually used outside the reinforced concrete floor pavement, and the 1:3 cement slurry is used to find the slope layer, and the thinnest part of the ground should be 20mm thick. 30mm thick dry hard cement mortar bonding layer, slope floor drain. Smoothing all at once.

4. The height of the waterproof decoration of the bathroom floor tiles, in addition to the waterproof layer, the use of cement mortar ground leveling, and the waterproof coating should be enclosed upwards at the contact point between the waterproof layer of the floor tiles and the wall, which is about 25 30cm above the ground.

5. The height of the water leak seal of the toilet sewer should be 50mm, the floor drain of the sewer should be about 10mm lower than the ground, and the hole diameter of the floor drain should be controlled between 6 and 8mm.

There are many places where the waterproof toilet will make the doorway, and the water barrier stone is about 10 cm above the threshold.

According to experience, the bathroom is waterproof to make the door at least 20cm, so as to ensure that the inside and outside are leak-proof.

It must be done, the perimeter of the exit door is best to be done, it can protect the door from being corroded and rusted, etc., the kitchen and bathroom home decoration is waterproof, and the upstairs Lei Bangshi specializes in this area, you can consult them in detail.

Bathroom waterproofing needs to be made 20-30cm outside the door.

1. Because the bathroom is equipped with a bathing function, in order to prevent water from overflowing to the door, it is necessary to make 20-30cm outside the door when doing waterproofing.

2. In addition to the need to level the ground, the bathroom also needs to do a good job of waterproofing the sewer pipes, floor drains, wall corners, etc.

3. In addition to the need for waterproofing on the ground, the waterproofing of the wall is also very necessary, and the waterproof treatment should not be lower than at least meters.

4. Toilet waterproof materials can be selected, such as: JS composite materials, polyurethane waterproof materials, waterproof glue, water leakage, cement-based permeable crystallization, permeable waterproofing agent, permanent condensate and so on.

5. After doing a good job of waterproofing, it is necessary to do a water leakage test: put 2-5cm of water on the ground. In order to find the leakage in time and remedy it in time.

The wall is waterproofed and made for more than one meter, which is not so strict.

Many people ask when they are decorating their bathroomsIs the bathroom waterproof？The answer is yes, the bathroom must be waterproof, whether it is a dry area or a bathing area, there are strict standards for waterproofing work.

Most developers waterproofing a home before handing it over just to face the inspection. When the decoration is completed, do waterproofing In order to ensure that we do water in our daily life to prevent seepage water to the ground or downstairs, to prevent water from seeping into the building, in order to avoid the safety of the neighborhood and the building and the quality experience of our living environment, we need to carry out waterproofing treatment during the renovation periodIs the bathroom waterproof？It is convenient for us, and it is also convenient for him Zhaohui people.

1. The main points of the bathroom must be cleaned in advance, and there should be no dust or other sundries. Also, make sure the surface is sturdy. Drainage holes, water pipe joints, yin and yang corners and part of the holes should be treated in a special way.

In addition, the cement mortar in the floor must be leveled before it can be waterproofed to avoid leakage.

Is the bathroom waterproofThe walls should also be waterproof, and these places should be waterproof about 30 cm above the ground to prevent seepage into the wall. If you want to install a bathtub, then the waterproofing should be higher.

3. Whether the ground needs to be leveled before waterproofing, whether the tiles need to be replaced, after the original bathroom floor tiles are removed, the cement mortar floor must be smoothed, and then waterproofed to avoid excessive waterproof layer caused by unevenness.

4. The ground and wall are not fully waterproof (the height is not less than meters), the balcony floor, wall and kitchen (the height is not less than meters), and if it is a first-floor resident, all the ground and walls (return to the height of the meter). Toilets need to be waterproof to 30 cm even in dry areas.

5. The joints should also be painted waterproof, and the joints between the bathroom wall and the connection between the upper and lower water pipes and the floor are the most likely to have problems. During the construction period, the owner mainly observes whether the construction personnel apply the waterproof paint in the appropriate position.

6. The thickness of the waterproof layer is not enough, and there will be water leakage in the future use, and it will be very troublesome to solve the water leakage.

When the waterproofing structure of the bathroom is completed, all the water outlets will be closed and the water will be injected 5-8 cm above the floor beam. Is the bathroom waterproof？After 24 hours, the surrounding walls and floors will be inspected for leaks.

You can get it for free

The bathroom is an indispensable space in people's lives, and bathroom waterproofing is the most important thing in decoration. Bathroom waterproof construction is directly related to the owner's future quality of life, so bathroom waterproofing should pay attention to many details, then,What should be paid attention to when doing waterproofing in the bathroomAnd what are the key points to pay attention to? Let's take a look!

1. Waterproof wall height.

What should be paid attention to when doing waterproofing in the bathroomAs a rule, the waterproof surface of the wall must be waterproof at a height of 30 cm. If the wall is waterproof, the basic waterproof height must be at least meters. In addition, the waterproof height of the bathroom walls of the bathroom should be meters.

If there is a bathtub, the waterproof height of the walls should be about 30 cm higher than that of the bathtub.

2. Bathroom sink, urinal waterproof decoration height.

The bathroom wall in contact with the sink must be at least 30 cm away from the sink. If the toilet is fitted with a urinal, the waterproof height must be one meter above the ground.

3. The height of the waterproof bathroom floor.

What should be paid attention to when doing waterproofing in the bathroomThe waterproofing of the bathroom floor is an important part of the bathroom decoration, so the waterproof height of the floor should be done well. First of all, the waterproofing of the bathroom floor should be used. The thickness of the waterproof layer should also be 20 mm, the thickness of the dry cement should be 30 mm, and the slope should be lined up to the ground and leveled once.

4. The waterproof height of bathroom tiles.

When the tile in the bathroom is waterproofed, in addition to the waterproofing layer under the surface of the tile, cement mortar must be used to level the floor, the floor must be surrounded by a wall, and it must be raised about 25-30 cm above the floor.

1. The performance of the waterproof material must meet the requirements of the national standard for sliding pins. When purchasing, the product qualification certificate must be carefully checked.

2. The flat layer of waterproof cement mortar and the surface of the base must be intensively combined, and there should be no hollowing, and the surface should be smooth and flat.

3. When the bath is waterproof, the waterproof layer of the coating film should be evenly painted, and the thickness should meet the requirements of the product technical specifications, and the general thickness should be millimeters.

4. The thickness and strength of the protective layer cement mortar must meet the design requirements. When operating, the waterproof layer should not be damaged. According to the design requirements, the surface slope must be carried out, and the drainage must not have water accumulation.

5. The surface of the waterproof base should be kept flat and there should be no cracking. The waterproofing amount of the base layer must meet the structural requirements of the waterproofing material.

You can get it for free